64-bit Ubunru 7.10 + Aver TV+

Sekcia: Aplikácie & Desktop 25.10.2007 | 18:43
Kiwi   Návštevník
Prosim Vas, vedel by mi niekto poradir co s tymto:
kiwi@kiwipc:~$ xawtv
[: 12: (opcode:: unexpected operator
This is xawtv-3.95.dfsg.1, running on Linux/x86_64 (2.6.22-14-generic)
xinerama 0: 1152x864+0+0
X Error of failed request: XF86DGANoDirectVideoMode
Major opcode of failed request: 137 (XFree86-DGA)
Minor opcode of failed request: 1 (XF86DGAGetVideoLL)
Serial number of failed request: 69
Current serial number in output stream: 69
kiwi@kiwipc:~$
    • Re: 64-bit Ubunru 7.10 + Aver TV+ 25.10.2007 | 19:46
      Kiwi   Návštevník
      Este pre upresnenie :

      05:01.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
      Subsystem: Avermedia Technologies Inc Unknown device f31d
      Flags: bus master, medium devsel, latency 32, IRQ 19
      Memory at f9101000 (32-bit, non-prefetchable) [size=2K]
      Capabilities: [40] Power Management version 2

      kiwi@kiwipc:~$ lsmod | grep saa
      saa7134_alsa 17440 0
      snd_pcm 94344 3 saa7134_alsa,snd_hda_intel,snd_pcm_oss
      saa7134 148308 1 saa7134_alsa
      video_buf 30084 2 saa7134_alsa,saa7134
      compat_ioctl32 11136 1 saa7134
      ir_kbd_i2c 11536 1 saa7134
      ir_common 38916 2 saa7134,ir_kbd_i2c
      videodev 31360 1 saa7134
      v4l2_common 21888 3 saa7134,compat_ioctl32,videodev
      i2c_core 30208 5 it87,i2c_isa,saa7134,nvidia,ir_kbd_i2c
      v4l1_compat 15364 2 saa7134,videodev
      snd 69288 11 saa7134_alsa,snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device

      tvtime spusti len ciernu obrazovku
      • Re: 64-bit Ubunru 7.10 + Aver TV+ 26.10.2007 | 03:12
        Kiwi   Návštevník
        mplayer pise toto:

        kiwi@kiwipc:~$ mplayer tv:// -tv driver=v4l2:norm=PAL:input=0:amode=1:width=768:height=576:outfmt=yuy2:device=/dev/video0:channel=25
        MPlayer 2:1.0~rc1-0ubuntu13 (C) 2000-2006 MPlayer Team
        CPU: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz (Family: 6, Model: 15, Stepping: 2)
        CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
        Compiled with runtime CPU detection.
        Can't open joystick device /dev/input/js0: No such file or directory
        Can't init input joystick
        mplayer: could not connect to socket
        mplayer: No such file or directory
        Failed to open LIRC support. You will not be able to use your remote control.

        Playing tv://.
        TV file format detected.
        Selected driver: v4l2
        name: Video 4 Linux 2 input
        author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
        comment: first try, more to come ;-)
        Selected device: UNKNOWN/GENERIC
        Capabilites: video capture video overlay VBI capture device read/write streaming
        supported norms: 0 = PAL; 1 = PAL-BG; 2 = PAL-I; 3 = PAL-DK; 4 = NTSC; 5 = SECAM; 6 = SECAM-DK; 7 = SECAM-L; 8 = SECAM-Lc; 9 = PAL-M; 10 = PAL-Nc; 11 = PAL-60;
        inputs: 0 = default;
        Current input: 0
        Current format: BGR24
        Selected input hasn't got a tuner!
        xscreensaver_disable: Could not find XScreenSaver window.
        GNOME screensaver disabled
        ==========================================================================
        Opening video decoder: [raw] RAW Uncompressed Video
        VDec: vo config request - 720 x 576 (preferred colorspace: Packed YUY2)
        VDec: using Packed YUY2 as output csp (no 0)
        Movie-Aspect is undefined - no prescaling applied.
        VO: [xv] 720x576 => 720x576 Packed YUY2
        Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
        ==========================================================================
        Audio: no sound
        Starting playback...
        No bind found for key 'c'.
        V: 0.0 81/ 81 ??% ??% ??,?% 0 0

        a kdetv nechce naladit ziadny kanal v ziadnej pal
        a motv tiez nic nenaladi ?

        CO robim zle ?
        • Re: 64-bit Ubunru 7.10 + Aver TV+ 26.10.2007 | 18:54
          Kiwi   Návštevník
          este par vypisov, ale obraz stale nejde, ani
          nejde naladit kanaly ?
          Any suggestions ??? Please, help.


          kiwi@kiwipc:~$ lsmod | grep bttv
          bttv 216692 0
          i2c_algo_bit 8324 1 bttv
          btcx_risc 6792 1 bttv
          tveeprom 20496 1 bttv
          video_buf 30084 3 bttv,saa7134_alsa,saa7134
          compat_ioctl32 11136 2 bttv,saa7134
          ir_common 38916 3 bttv,saa7134,ir_kbd_i2c
          videodev 31360 2 bttv,saa7134
          v4l2_common 21888 4 bttv,saa7134,compat_ioctl32,videodev
          v4l1_compat 15364 3 bttv,saa7134,videodev
          i2c_core 30208 8 bttv,i2c_algo_bit,tveeprom,it87,i2c_isa,saa7134,nvidia,ir_kbd_i2c
          kiwi@kiwipc:~$ v4lctl list
          attribute | type | current | default | comment
          -----------+--------+---------+---------+-------------------------------------
          norm | choice | PAL-DK | PAL | PAL PAL-BG PAL-I PAL-DK NTSC SECAM SECAM-DK SECAM-L SECAM-Lc PAL-M PAL-Nc PAL-60
          input | choice | default | default | default
          bright | int | 128 | 128 | range is 0 => 255
          contrast | int | 68 | 68 | range is 0 => 127
          color | int | 64 | 64 | range is 0 => 127
          hue | int | 0 | 0 | range is -128 => 127
          volume | int | 0 | 0 | range is -15 => 15
          mute | bool | on | off |
          Mirror | bool | off | off |
          Invert | bool | off | off |
          y offset o | int | 0 | 0 | range is 0 => 128
          y offset e | int | 0 | 0 | range is 0 => 128
          automute | bool | on | on |
          kiwi@kiwipc:~$
          • Re: 64-bit Ubunru 7.10 + Aver TV+ 26.10.2007 | 18:59
            Kiwi   Návštevník
            este toto:
            kiwi@kiwipc:~$ dmesg | grep saa
            [ 37.895469] saa7130/34: v4l2 driver version 0.2.14 loaded
            [ 37.897180] saa7133[0]: found at 0000:05:01.0, rev: 209, irq: 19, latency: 128, mmio: 0xf9101000
            [ 37.897185] saa7133[0]: subsystem: 1461:f31d, board: UNKNOWN/GENERIC [card=0,autodetected]
            [ 37.897191] saa7133[0]: board init: gpio is 806d8
            [ 38.042912] saa7133[0]: i2c eeprom 00: 61 14 1d f3 ff ff ff ff ff ff ff ff ff ff ff ff
            [ 38.042917] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
            [ 38.042921] saa7133[0]: i2c eeprom 20: ff d2 fe ff ff ff ff ff ff ff ff ff ff ff ff ff
            [ 38.042925] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
            [ 38.042928] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
            [ 38.042932] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
            [ 38.042936] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
            [ 38.042940] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
            [ 38.043164] saa7133[0]: registered device video0 [v4l2]
            [ 38.043179] saa7133[0]: registered device vbi0
            [ 38.047763] saa7134 ALSA driver for DMA sound loaded
            [ 38.047779] saa7133[0]/alsa: saa7133[0] at 0xf9101000 irq 19 registered as card -2
            kiwi@kiwipc:~$
            Tak preco to nehuciiiiiiiiii ?
            • Re: 64-bit Ubunru 7.10 + Aver TV+ 26.10.2007 | 21:45
              Kiwi   Návštevník
              No konecne to ide, problem bol, ze som si nevsimol revitiu karty, ktora
              je 1461:f31d, potom staci poutiz navod na:

              http://www.linuxtv.org/v4lwiki/index.php/AVerMedia_AVerTV_GO_007_FM

              mal by sa vam objavit tento vypis:

              [ 31.565412] Linux video capture interface: v2.00
              [ 31.570148] input: PC Speaker as /class/input/input2
              [ 31.585795] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
              [ 31.718509] saa7130/34: v4l2 driver version 0.2.14 loaded
              [ 31.718554] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19
              [ 31.718559] saa7133[0]: found at 0000:05:01.0, rev: 209, irq: 19, latency: 64, mmio: 0xf9101000
              [ 31.718562] saa7133[0]: subsystem: 1461:f31d, board: Avermedia AVerTV GO 007 FM [card=57,insmod option]
              [ 31.718567] saa7133[0]: board init: gpio is 806d8
              [ 31.718609] input: saa7134 IR (Avermedia AVerTV GO as /class/input/input3
              [ 31.743080] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
              [ 31.743084] Uniform CD-ROM driver Revision: 3.20
              [ 31.743130] sr 6:0:1:0: Attached scsi CD-ROM sr0
              [ 31.865140] saa7133[0]: i2c eeprom 00: 61 14 1d f3 ff ff ff ff ff ff ff ff ff ff ff ff
              [ 31.865145] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
              [ 31.865149] saa7133[0]: i2c eeprom 20: ff d2 fe ff ff ff ff ff ff ff ff ff ff ff ff ff
              [ 31.865153] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
              [ 31.865157] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
              [ 31.865161] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
              [ 31.865164] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
              [ 31.865168] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
              [ 31.874021] nvidia: module license 'NVIDIA' taints kernel.
              [ 32.250366] input: PS/2 Logitech Mouse as /class/input/input4
              [ 32.253380] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
              [ 32.253415] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
              [ 32.256910] tuner 0-004b: chip found @ 0x96 (saa7133[0])
              [ 32.316869] tuner 0-004b: setting tuner address to 61
              [ 32.364840] tuner 0-004b: type set to tda8290+75a
              [ 33.919909] tuner 0-004b: setting tuner address to 61
              [ 33.967881] tuner 0-004b: type set to tda8290+75a
              [ 35.465798] saa7133[0]: registered device video0 [v4l2]
              [ 35.465813] saa7133[0]: registered device vbi0
              [ 35.465830] saa7133[0]: registered device radio0
              [ 35.547022] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
              [ 35.547028] PCI: Setting latency timer of device 0000:01:00.0 to 64
              [ 35.547099] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007
              [ 35.547976] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
              [ 35.548249] PCI: Setting latency timer of device 0000:00:1b.0 to 64
              [ 35.569499] saa7134 ALSA driver for DMA sound loaded
              [ 35.570489] saa7133[0]/alsa: saa7133[0] at 0xf9101000 irq 19 registered as card -2

              potom naistalovat kdetv cez Synaptic alebo apt-get,

              a mozete sledovat TV.
              • Re: 64-bit Ubunru 7.10 + Aver TV+ 27.10.2007 | 18:38
                Kiwi   Návštevník
                Vie mi niekto poradit ako nastavit lirc
                a ako grabovat mplayerom z tejto TV karty ?
                skusal som to cez tv aj pvr, ale stale black .avi,
                hoci karta ide OK, a na remote ovladaci ide
                len zmena zvuku, ale posuva sa len slider,
                ale na zvuk t vplyv nema.
                • Re: 64-bit Ubunru 7.10 + Aver TV+ Mplayer a mencoder 27.10.2007 | 18:56
                  Kiwi   Návštevník
                  preco mi tento prikaz nahrava len black obraz a praskanie vo zvuku ?
                  Please help.

                  kiwi@kiwipc:~$ mencoder tv:// -o tv.avi tv=driver=v4l2:input=television:width=768:height=576:device=/dev/video0:audiorate=44100:channel=2
                  MEncoder 2:1.0~rc1-0ubuntu13 (C) 2000-2006 MPlayer Team
                  CPU: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz (Family: 6, Model: 15, Stepping: 2)
                  CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
                  Compiled with runtime CPU detection.
                  success: format: 9 data: 0x0 - 0x0
                  TV file format detected.
                  Selected driver: v4l2
                  name: Video 4 Linux 2 input
                  author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
                  comment: first try, more to come ;-)
                  Selected device: Avermedia AVerTV GO 007 FM
                  Tuner cap: STEREO LANG1 LANG2
                  Tuner rxs: MONO
                  Capabilites: video capture video overlay VBI capture device tuner read/write streaming
                  supported norms: 0 = PAL; 1 = PAL-BG; 2 = PAL-I; 3 = PAL-DK; 4 = NTSC; 5 = SECAM; 6 = SECAM-DK; 7 = SECAM-L; 8 = SECAM-Lc; 9 = PAL-M; 10 = PAL-Nc; 11 = PAL-60;
                  inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
                  Current input: 1
                  Current format: BGR24
                  v4l2: current audio mode is : MONO
                  Audio block size too low, setting to 8192!
                  [V] filefmt:9 fourcc:0x32315659 size:720x576 fps:25.00 ftime:=0.0400
                  ==========================================================================
                  Opening audio decoder: [pcm] Uncompressed PCM audio decoder
                  AUDIO: 48000 Hz, 1 ch, s16le, 768.0 kbit/100.00% (ratio: 96000->96000)
                  Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
                  ==========================================================================
                  ==========================================================================
                  Opening video decoder: [raw] RAW Uncompressed Video
                  VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12)
                  VDec: using Planar YV12 as output csp (no 0)
                  Movie-Aspect is undefined - no prescaling applied.
                  videocodec: libavcodec (720x576 fourcc=34504d46 [FMP4])
                  Selected video codec: [rawyv12] vfm: raw (RAW YV12)
                  ==========================================================================
                  Forcing audio preload to 0, max pts correction to 0.
                  Writing header...1f ( 0%) 0.00fps Trem: 0min 0mb A-V:0.000 [0:0]
                  ODML: vprp aspect is 16384:13107.
                  Writing header...
                  ODML: vprp aspect is 16384:13107.
                  Pos: 0.4s 11f ( 0%) 0.00fps Trem: 0min 0mb A-V:0.000 [0:0]
                  1 duplicate frame(s)!
                  Pos: 1.0s 24f ( 0%) 20.87fps Trem: 0min 0mb A-V:0.000 [0:0]
                  1 duplicate frame(s)!
                  Pos: 1.5s 36f ( 0%) 21.61fps Trem: 0min 0mb A-V:0.000 [159:224]
                  1 duplicate frame(s)!
                  Pos: 2.0s 47f ( 0%) 21.70fps Trem: 0min 0mb A-V:0.000 [152:224]
                  Flushing video frames
                  Writing index...
                  Writing header...
                  ODML: vprp aspect is 16384:13107.

                  Video stream: 152.756 kbit/s (19094 B/s) size: 38189 bytes 2.000 secs 47 frames

                  Audio stream: 224.000 kbit/s (28000 B/s) size: 55104 bytes 1.968 secs
                  v4l2: 49 frames successfully processed, 4 frames dropped.
                  kiwi@kiwipc:~$
                  • Re: 64-bit Ubunru 7.10 + Aver TV+ Mplayer a mencoder 01.02.2008 | 22:55
                    pvdeejay   Návštevník
                    Ahoj,
                    predpokladám, že zvuk je pripojený cez kábel na zvukovú kartú. skús možnosti -tv pridať tieto podmožnosti amode=1:immediatemode=0:forceaudio
                    ja som mal tiež problém s touto kartou. našiel som si iný trik.. do /etc/modprobe.d/options som pridal riadok
                    options cx88xx card=6 tuner=38
                    ale teraz aj keď karta perfektne funguje, hlási sa tiež ako aver tv studio 303 nemôžem nastaviť stereo prehrávanie TV. rádio mi ide aj stereo
                    ty si tiež len pridával možnosť do /etc/modprobe.d/options alebo aj tie ďalšie kroky?.
                    • Re: 64-bit Ubunru 7.10 + Aver TV+ Mplayer a mencoder 02.02.2008 | 01:16
                      skywaker   Návštevník
                      chcel by som sa podakovat za prispevky do tohto threadu kedze tiez mam AverTV Go 007+..


                      mam zenwalk linux a nemam oss modul na miesto toho som skusil saa7134-alsa a tiez to funguje.. pouzivam mplayer
                    • Re: 64-bit Ubunru 7.10 + Aver TV+ Mplayer a mencoder 02.02.2008 | 01:56
                      pvdeejay   Návštevník
                      tak trošku som to pomiešal, neviem prečo som predpokladal kartu avertv studio 303. Tak som ale na wiki v4l2 zistil, že tie avertv studio 303 sú 2, tak poskúšam, či som náhodov nevybral tú nesprávnu.
                      Stále by som bol vďačný za akékoľvek nápady.
                      fm rádio mi ide krásne stereo ale tv nie.