Zvuk pod gentoo na notebooku

zdravim, nainstaloval som si na notebook(Benq R22) Gentoo AMD64. Vsetko funguje az na zvukovu kartu(modul by mal byt snd_via82xx). Jadro mam 2.6.12-gentoo-r9. Alsa-conf zvukovku najde, cez alsa-mixer ju dokazem nastavit, ale nic nepocujem! v amaroKu ked pridem nejku MP3 pesnicku do play-listu a dam hrat, tak hned skonci nakoniec. dmesg: Bootdata ok (command line is root=/dev/hda3 real_root=/dev/hda3 vga=0x317 udev quiet) Linux version 2.6.12-gentoo-r9 (root@wigwam) (gcc version 3.4.3 20041125 (Gentoo 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #1 Mon Aug 29 13:23:15 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001dff0000 (usable) BIOS-e820: 000000001dff0000 - 000000001dffffc0 (ACPI data) BIOS-e820: 000000001dffffc0 - 000000001e000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) ACPI: RSDP (v000 OID_00 ) @ 0x00000000000e5010 ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x000000001dffc2e0 ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x000000001dfffaa0 ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x000000001dfffb90 ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010101) @ 0x000000001dfffbc0 ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x30303030) @ 0x000000001dfffb30 ACPI: DSDT (v001 INSYDE K8N800 0x00001000 INTL 0x02002036) @ 0x0000000000000000 No mptable found. On node 0 totalpages: 122864 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 118768 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1f80000) Checking aperture... CPU 0: aperture @ b0000000 size 256 MB Built 1 zonelists Kernel command line: root=/dev/hda3 real_root=/dev/hda3 vga=0x317 udev quiet Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2004.584 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Memory: 476596k/491456k available (3100k kernel code, 14080k reserved, 1352k data, 200k init) Calibrating delay loop... 3956.73 BogoMIPS (lpj=1978368) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Mobile AMD Athlon(tm) 64 Processor 3000+ stepping 00 Using local APIC timer interrupts. Detected 12.528 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 1) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *7 10 11 14 15) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 256M @ 0xb0000000 PCI-DMA: Disabling IOMMU. Simple Boot Flag at 0x37 set to 0x1 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Total HugeTLB memory allocated, 0 inotify device minor=63 Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 JFS: nTxBlock = 3726, nTxLock = 29811 SGI XFS with ACLs, large block/inode numbers, no debug enabled Initializing Cryptographic API Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 vesafb: framebuffer at 0xa4000000, mapped to 0xffffc20000400000, using 3072k, total 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=20 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SBTN] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [TZ0] (53 C) i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled mice: PS/2 mouse device common for all mice io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt 0000:00:11.1[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:11.1, from 0 to 4 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... input: AT Translated Set 2 keyboard on isa0060/serio0 hda: FUJITSU MHT2060AT, ATA DISK drive Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0x804713/0x0 input: SynPS/2 Synaptics TouchPad on isa0060/serio3 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: MATSHITAUJ-840D, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 usbmon: debugs is not available md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 6124.000 MB/sec raid5: using function: generic_sse (6124.000 MB/sec) raid6: int64x1 1820 MB/s raid6: int64x2 2640 MB/s raid6: int64x4 2613 MB/s raid6: int64x8 1730 MB/s raid6: sse2x1 1007 MB/s raid6: sse2x2 1765 MB/s raid6: sse2x4 2691 MB/s raid6: using algorithm sse2x4 (2691 MB/s) md: raid6 personality registered as nr 8 md: multipath personality registered as nr 7 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff8050b980(lo) IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x4 (1450 mV) powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 (1350 mV) powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xa (1300 mV) powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x13 (1075 mV) cpu_init done, current fid 0xc, vid 0x4 ACPI wakeup devices: SBTN USB0 USB1 USB2 EHCI AC97 MC97 LAN0 ACPI: (supports S0 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 200k freed ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.3, from 7 to 5 ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: irq 21, io mem 0xf0002000 ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x00001200 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x00001300 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x00001700 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ieee1394: Initialized config rom entry `ip1394' sbp2: $Rev: 1219 $ Ben Collins libata version 1.11 loaded. usb 2-2: new low speed USB device using uhci_hcd and address 2 ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda3 input: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on usb-0000:00:10.0-2 kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 747012k swap on /dev/hda4. Priority:-1 extents:1 EXT3 FS on hda3, internal journal hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hda: drive not ready for command hda: CHECK for good STATUS ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 rt2500 1.1.0 BETA3 2005/07/31 http://rt2x00.serialmonkey.com via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=1 or dxs_support=4 option and report if it works on your machine. ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 6 PCI: Setting latency timer of device 0000:00:11.5 to 64 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Via IRQ fixup for 0000:00:11.6, from 5 to 6 PCI: Setting latency timer of device 0000:00:11.6 to 64 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 7 eth0: VIA Rhine II at 0x1e200, 00:40:d0:6e:c6:dc, IRQ 23. eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. eth0: link down hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xec hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xec hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xec Losing some ticks... checking if CPU frequency changed. ra0: no IPv6 routers present ip_local_deliver: bad skb: PRE_ROUTING LOCAL_IN LOCAL_OUT POST_ROUTING skb: pf=2 (unowned) dev=lo len=60 PROTO=6 127.0.0.1:50188 127.0.0.1:111 L=60 S=0x00 I=62243 F=0x4000 T=64 ip_local_deliver: bad skb: PRE_ROUTING LOCAL_IN LOCAL_OUT POST_ROUTING skb: pf=2 (unowned) dev=lo len=40 PROTO=6 127.0.0.1:111 127.0.0.1:50188 L=40 S=0x00 I=0 F=0x4000 T=64 ip_local_deliver: bad skb: PRE_ROUTING LOCAL_IN LOCAL_OUT POST_ROUTING skb: pf=2 (unowned) dev=lo len=60 PROTO=6 127.0.0.1:50189 127.0.0.1:111 L=60 S=0x00 I=2836 F=0x4000 T=64 ip_local_deliver: bad skb: PRE_ROUTING LOCAL_IN LOCAL_OUT POST_ROUTING skb: pf=2 (unowned) dev=lo len=40 PROTO=6 127.0.0.1:111 127.0.0.1:50189 L=40 S=0x00 I=1 F=0x4000 T=64 ip_local_deliver: bad skb: PRE_ROUTING LOCAL_IN LOCAL_OUT POST_ROUTING skb: pf=2 (unowned) dev=lo len=60 PROTO=6 127.0.0.1:50190 127.0.0.1:111 L=60 S=0x00 I=27375 F=0x4000 T=64 ip_local_deliver: bad skb: PRE_ROUTING LOCAL_IN LOCAL_OUT POST_ROUTING skb: pf=2 (unowned) dev=lo len=40 PROTO=6 127.0.0.1:111 127.0.0.1:50190 L=40 S=0x00 I=2 F=0x4000 T=64 ip_local_deliver: bad skb: PRE_ROUTING LOCAL_IN LOCAL_OUT POST_ROUTING skb: pf=2 (unowned) dev=lo len=60 PROTO=6 127.0.0.1:50191 127.0.0.1:111 L=60 S=0x00 I=43002 F=0x4000 T=64 ip_local_deliver: bad skb: PRE_ROUTING LOCAL_IN LOCAL_OUT POST_ROUTING skb: pf=2 (unowned) dev=lo len=40 PROTO=6 127.0.0.1:111 127.0.0.1:50191 L=40 S=0x00 I=3 F=0x4000 T=64 lsmod: Module Size Used by via_rhine 24836 0 mii 6272 1 via_rhine snd_via82xx_modem 17348 0 snd_via82xx 30176 0 gameport 16840 1 snd_via82xx snd_ac97_codec 88272 2 snd_via82xx_modem,snd_via82xx snd_pcm 99084 3 snd_via82xx_modem,snd_via82xx,snd_ac97_codec snd_timer 25416 1 snd_pcm snd_page_alloc 11080 3 snd_via82xx_modem,snd_via82xx,snd_pcm snd_mpu401_uart 8064 1 snd_via82xx snd_rawmidi 28320 1 snd_mpu401_uart snd_seq_device 9808 1 snd_rawmidi snd 59688 8 snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 11168 1 snd i2c_viapro 9044 0 rt2500 194728 1 ata_piix 11076 0 sata_vsc 9220 0 sata_sis 8256 0 sata_sx4 14788 0 sata_nv 10692 0 sata_via 9668 0 sata_svw 8900 0 sata_sil 10884 0 sata_promise 12548 0 libata 49864 9 ata_piix,sata_vsc,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil,sata_promise sbp2 25352 0 ohci1394 34252 0 ieee1394 108664 2 sbp2,ohci1394 ohci_hcd 21188 0 uhci_hcd 31968 0 usb_storage 68416 0 usbhid 36128 0 ehci_hcd 33928 0 lspci: 0000:00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 0000:00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 0000:00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 0000:00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 0000:00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 0000:00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] 0000:00:09.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01) 0000:00:0a.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 0000:00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01) Dakujem za kazdu radu!