Acer Travelmate 240 - CPU Frequency Scaling

Sekcia: Konfigurácia 25.12.2006 | 16:58
Avatar Lukáš Ubuntu 9.10  Používateľ
Na notebooku Acer Travelmate 240 sa pokusam robehnut frequency scaling. Nasiel som si pekny navod: http://www.freewebs.com/duckzland/t240.html Ktory spociva v (je to pre fedoru 4, pricom ja tam mam zenwalk4): The Acer Travelmate 240 turns out to have 9 stepping of CPU frequency, If you are using kernel 2.6 (Fedora Core 4 standard) then you should have cpufreq kernel module, cpufreq-selector and optional : cpufreq-utils package installed using yum. To install the CPU frequency, first you will need to load the kernel module : p4-clockmod cpufreq_ondemand cpufreq_powersave Then use dmesg to check if the module loaded correctly or not. Then you will need to load the gnome CPU frequency applet. After that, issue /usr/sbin/cpufreq-selector -g governor (ondemand, powersave, performance) to set your desired governor. After successful loading, edit the rc.local to add : modprobe p4_clockmod modprobe "desired_governor" (cpufreq_ondemand, cpufreq_powersave) Otazky: Aku utilitku pouzijem namiesto "gnome CPU frequency applet"? Dals som prikaz: dmesg :a vyplulo mi to: vposlednom riadku: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Ako zistim, ze ktory modul tam je, ktory treba loadnut? A hlavne ako ho loadnut?
Juchúúú! Písmenkujem na lukas.cerro.sk
    • Re: Acer Travelmate 240 - CPU Frequency Scaling 17.12.2006 | 15:16
      darkstar   Návštevník
      na vypis natiahnutyx modulov je prikaz lsmod ked xces nejaky modul natiahnut do jadra tak prikazom modprobe ale insmod pozri man namiesto "gnome CPU frequency applet" mozes pouzit echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
      • Rozlisenie monitora 24.12.2006 | 20:26
        Avatar Lukáš Ubuntu 9.10  Používateľ
        Na hore uvedenom notebooku je rozbity hlavny display. Cize vyuzivam len koncovku na externy monitor, kde sa mi stale nejak nedari nahodit rozlisenie 1280x1024. Skusal som nejake editacie xorg.conf, ale no nejak nic. Co teda editovat v nom, aby mi n abehlo 1280x1024? Dakujem P.s. Predchadzajuci problem sa nedari vyriesit nikde. Ta potvora nezhodi frekvenciu nizsie ani na windowse. Tu je moj xorg.conf: # ********************************************************************** # This file was generated by videoconfig (Zenwalk Xorg configuration tool) # If you changed your video card or monitor, please run videoconfig again # from runlevel 3. Don't modify this file yourself until you know what you do ;) # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" RgbPath "/usr/share/X11/rgb" ModulePath "/usr/lib/X11/modules" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/Type1" EndSection # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** Section "Module" Load "glx" Load "extmod" Load "xtrap" Load "record" Load "dbe" Load "dri" Load "freetype" Load "type1" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Option "NoTrapSignals" # Option "DontVTSwitch" # Option "DontZap" # Option "DontZoom" # Option "DisableVidModeExtension" # Option "AllowNonLocalXvidtune" # Option "DisableModInDev" # Option "AllowNonLocalModInDev" # Option "blank time" "10" # 10 minutes # Option "standby time" "20" # Option "suspend time" "30" # Option "off time" "60" # Option "EstimateSizesAggresively" "0" EndSection # ********************************************************************** # DRI section # ********************************************************************** Section "dri" # Access to OpenGL ICD is allowed for all users: Mode 0666 # Access to OpenGL ICD is restricted to a specific user group: # Group 100 # users EndSection # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "kbd" # Option "Protocol" "Xqueue" # Option "AutoRepeat" "500 5" # Option "Xleds" "1 2 3" # Option "XkbDisable" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "sk_qwerty" # Option "XkbVariant" "us" # Option "XkbOptions" "" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "Auto" Option "Device" "/dev/mouse" # Option "Protocol" "Xqueue" # Option "BaudRate" "9600" # Option "SampleRate" "150" # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # Option "ChordMiddle" Option "ZAxisMapping" "4 5" EndSection # ********************************************************************** # Monitor section # ********************************************************************** Section "Monitor" Identifier "Monitor1" VendorName "___" ModelName "___:ffff" HorizSync 31.5 - 50.0 VertRefresh 40-90 Option "UseEdidFreqs" "1" EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present Section "Device" Identifier "Videocard1" VendorName "Intel Corporation" BoardName "82852/855GM Integrated Graphics Device" Driver "i810" BusID "PCI:0:2:0" EndSection # ********************************************************************** # Screen sections # ********************************************************************** Section "Screen" Identifier "Videoconfig" Device "Videocard1" Monitor "Monitor1" DefaultDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 32 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** Section "ServerLayout" Identifier "Simple Layout" Screen "Videoconfig" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection
        Juchúúú! Písmenkujem na lukas.cerro.sk
        • Re: Rozlisenie monitora 25.12.2006 | 02:15
          WlaSaTy   Návštevník
          odporucil by som pozriet sekciu monitor, frekvencie sice umoznuju dane rozlisenie ale podla ich rozsahu je mala pravdepodobnost ze to pojde. ak by boli ok, tak zrusit edid a v pripade maximalnej krizy to rozsirenie aj zadefinovat. a hlavne skontrolovat logy.
          • Re: Re: Rozlisenie monitora 25.12.2006 | 11:52
            55.lukas   Návštevník
            Ja som cumel na nejaky prikaz xrand (alebo nieco take) a podla neho mi to vyplulo ze pri 1280x1024 mi to da len 40Hz. Vo windowse mi to da 1280x1024 pri 75Hz tak by to malo ist, uz to len nejak nastavit.
            • Re: Re: Re: Rozlisenie monitora 25.12.2006 | 16:58
              WlaSaTy   Návštevník
              ten prikaz je xrandr a jedna sa o ovladanie rozsirenia pre xwindors ktore umoznuje menit za behu rozlisenie, frekvenciu a orientaciu zobrazovania. vzhladom na to ze system zle zdetekoval pracovny rozsah frekvencii (vid odporucany log z xwindows) alebo je to zle napisane v konfiguraku (vid frekvencny rozsah a DDC), tak je pochopitelne ze to bezi na nizsich rozsahoch ako by malo a tym padom sa aj nejake rozlisenia zrusia. takze co urobime?