ATI A LCD

Sekcia: Hardware a Drivery 02.01.2007 | 14:00
Alex   Návštevník
Ahojte....Nahodil som si Ubuntu 6.10.Islo vsetko super az do vtedy ked som nahodil ovladace od ATI...Robil som to asi 100krat ale na CRT-cku..A teraz ked sa mam prihlasit monitor vypne..Mam monitor pripojeni cez DVI.DIk
    • Re: ATI A LCD 31.12.2006 | 12:48
      Alex   Návštevník
      A ako zisti rozlisenie?Skusal som to cez live cd..Robil som to takto gtf 1024 768 70 a pridal som ten riadok do xorg.conf..v sekcii monitor.
      • Re: Re: ATI A LCD 31.12.2006 | 13:54
        Alex   Návštevník
        vypis xorgu # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "ServerLayout" Identifier "Default Layout" Screen 0 "aticonfig-Screen[0]" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "stylus" "SendCoreEvents" InputDevice "cursor" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" EndSection Section "Files" # path to defoma fonts FontPath "/usr/share/X11/fonts/misc" FontPath "/usr/share/X11/fonts/cyrillic" FontPath "/usr/share/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/X11/fonts/Type1" FontPath "/usr/share/X11/fonts/100dpi" FontPath "/usr/share/X11/fonts/75dpi" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "sk" Option "XkbOptions" "lv3:ralt_switch" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ExplorerPS/2" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "true" EndSection Section "InputDevice" # /dev/input/event # for USB Identifier "stylus" Driver "wacom" Option "Device" "/dev/wacom" # Change to Option "Type" "stylus" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "InputDevice" # /dev/input/event # for USB Identifier "eraser" Driver "wacom" Option "Device" "/dev/wacom" # Change to Option "Type" "eraser" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "InputDevice" # /dev/input/event # for USB Identifier "cursor" Driver "wacom" Option "Device" "/dev/wacom" # Change to Option "Type" "cursor" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "Monitor" Identifier "B71A" Option "DPMS" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" # 1024x768 @ 70.00 Hz (GTF) hsync: 56.00 kHz; pclk: 76.16 MHz Modeline "1024x768_70.00" 76.16 1024 1080 1192 1360 768 769 772 800 -HSync +Vsync EndSection Section "Device" Identifier "ATI Technologies, Inc. RV350 AP [Radeon 9600]" Driver "ati" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]" Driver "fglrx" Option "VideoOverlay" "on" Option "OpenGLOverlay" "off" EndSection Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. RV350 AP [Radeon 9600]" Monitor "B71A" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "0" EndSection
        • Re: Re: Re: ATI A LCD 31.12.2006 | 14:47
          WlaSaTy   Návštevník
          ten konfigura si robil ty alebo ho pretvoril do tejto podoby nejaky program od ati? ale to nic nemeni na tom ze je treba definovat pracovne frekvencie pre monitor, teda tu jednu - 60Hz. mimochodom, uz mas novy kabel?
        • Re: Re: Re: ATI A LCD 31.12.2006 | 21:34
          hm... ja...   Návštevník
          Chceš používat 1024x768, ale já ve všech řádcích "Modes" vidím višší 1280x1024. Tvé LCD ho nezvládne a vypne se. Smaž všechny hodnoty 1280x1024 v section Screen a měl bys být za vodou...
          • Re: Re: Re: Re: ATI A LCD 01.01.2007 | 14:20
            ALEX   Návštevník
            SKUSIM a hned dam vediet
          • Re: Re: Re: Re: ATI A LCD 01.01.2007 | 15:22
            WlaSaTy   Návštevník
            no vidis, a ja tam zase dane rozlisenia nevidim, a tak isto tam nevidim ani zakladnu informaciu (pracovny rozsah frekvencii) pre monitor. do daneho konfigu totizto pribudli sekcie identifikovane ako aticonfig-* ktore su ako jedine definovane cez serverlayout a tie nevyzeraju moc rozumne. asi by bolo vhodne precistit dany konfig a doplnit donho to co je potrebne.
            • Re: Re: Re: Re: Re: ATI A LCD 01.01.2007 | 21:47
              Alex   Návštevník
              monitor len preblikol asi 5 krat a koniec...Tak neake napady?
              • Re: Re: Re: Re: Re: Re: ATI A LCD 01.01.2007 | 22:18
                Alex   Návštevník
                Zmazal som vsetko kde bolo1280 1024..ale nic
                • Re: Re: Re: Re: Re: Re: Re: ATI A LCD 01.01.2007 | 22:20
                  Alex   Návštevník
                  Ale LiveCD ide.....Iba ked nahodim ovladace...Mam monitor pripojeny cez DVI a redukcia na RGB a monitor DVI-RGB-MONITOR..
                • Re: Re: Re: Re: Re: Re: Re: ATI A LCD 01.01.2007 | 22:43
                  WlaSaTy   Návštevník
                  a malo by to pomoct? serverlayout sa rekurzivne odkazuje na zariadenia pomenovane aticonfig-*, a ty robil zmeny v momentalne neaktivnej casti konfiguracie. predpokladam ze chces pouzit graficky mod "1024x768_70.00" inac by si ho nam nevkladal, tak daj jeho meno na podobne miesto ako to, z ktoreho si teraz vymazaval. skus si ten konfig vytlacit a pozri si sekciu ServerLayout, najme ake screeny su pouzite. tie si potom zaskrtni na papieri a pozri si ktory device je tam pouzity a aj ktory monitor. potom zbadas kam mas dat tie definicie frekvencii a rozsahov ...
                  • Re: Re: Re: Re: Re: Re: Re: Re: ATI A LCD 01.01.2007 | 23:36
                    ALEX   Návštevník
                    AOu akosi nechapem : prepac
                    • Re: Re: Re: Re: Re: Re: Re: Re: Re: ATI A LCD 01.01.2007 | 23:40
                      ALEX   Návštevník
                      Ja bych skor chcel pouzit 1280 1024 70HZ
                    • Re: Re: Re: Re: Re: Re: Re: Re: Re: ATI A LCD 02.01.2007 | 01:01
                      WlaSaTy   Návštevník
                      vtip je v tom, ze po nainstalovani ovladacov bol zrejme spusteny aticonfig ktory znicil predchadzajuci konfigurak a ty ho musis bud opravit alebo pregenerovat. dalsi vtip je v tom, ze mas monitor napojeny cez redukciu dvi2rgb a nemas definovany rozsah pracovnych frekvencii. to by nevadilo pretoze dvi nepotrebuje definovat frekvenciu (je pouzity na lcdcka ktore nemaju elektronovy luc) a monitory s rgb vstupom pracovali na fixnej frekvencii podobne ako teraz lcdcka emuluju 60Hz. ale vadi to, pretoze crt monitory s rgb konektorom nezvykli pracovat na tak nizkej frekvencii, boli predsa urcene pre graficke studia. a navyse to vadi dvojnasobne pretoze binarne ovladace vzdy pouzivaju frekvenciu ktoru odhaduju podla rychlosti vetraku v pivovare stein a nie tu co by mali, pokial im to clovek vyslovne nerozkaze.
                      • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: ATI A LCD 02.01.2007 | 02:33
                        Alex   Návštevník
                        OK CO TERAZ?SKusim nahodit znova ovladac bez aticonfig..ale 2 neako nepochopil
                        • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: ATI A 02.01.2007 | 03:23
                          Alex   Návštevník
                          Ahoj...nahodil som ten ovladac od ati..Dal som to bez ati config..Ale som prepisal v xorgu ATI na FGLRX:..a NIC:(Zas nevie co ma monitor robit
                          • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: AT 02.01.2007 | 11:02
                            WlaSaTy   Návštevník
                            ovladac a konfiguracny subor su dve rozne veci.
                            • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re 02.01.2007 | 11:55
                              Alex   Návštevník
                              Dobre tak co teraz....
                              • xorgconfig 02.01.2007 | 12:37
                                meno   Návštevník
                                Zkus to všechno nastavit příkazem "xorgconfig". Jednoduchý průvodce s nastavením všeho, co je potřeba, tak to už MUSÍ jít...
                              • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re 02.01.2007 | 12:38
                                WlaSaTy   Návštevník
                                vzhladom na to ze si nainstaloval ovladace a s nimi dodavany konfiguracny nastroj ti pokazil jeden z (pre teba) najdolezitejsich konfigurakov, tak mas na vyber.: 1) zaloziz ruky v bok a budes sa nadalej pytat co dalej. ak nechces, tak sa radami riadit nemusis. 2) mozes obnovit zo zalohy povodny konfigurak a rucne prehodit pouzity ovladac na ten binarny, nezabudni ovsem skonsolidovat aj nacitavanie modulov (pozor na glx) 3) mozes sa pokusit ten konfigurak pregenerovat prikazom ktory je uvedeny na zaciatku (riadok sudo blah blah) 4) mozes ten konfigurak opravit tak ako ti bolo poradene ale kazdopadne budes musiet doplnit vlastnosti monitoru do daneho konfiguraku. ak nevies ake to su, tak sa pozri do knizocky ktora bola dodana s monitorom, alebo aspon na zadnu stranu monitora an ten plechoidny scitok. je len na tebe ci budes aj nadalej pouzivat prvy sposob alebo to zmenis. k tomu aby to niekto mohol pomoct musis povedat co si z ponuknutych moznosti vyskusal a s akym vysledkom.
                                • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re 02.01.2007 | 13:18
                                  Alex   Návštevník
                                  Skusim 2 a 3...Trojku zvladnem ale asi ee 2 :)
                                  • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re 02.01.2007 | 13:34
                                    Alex   Návštevník
                                    Tayke dal som sudo dpkg-reconfigure xserver-xorfg...Dobre dalsomymenit tzp na fglrx pustilo ale yas len poprihlasovaciu obrayovku...Potom som dal ATI a VESA a napisalo FATALEROR..takyenic s toho...Chcel bzsomskusit prehodit na binarne ale to neviem ako sa robi...
                                    • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re 02.01.2007 | 14:00
                                      ALex   Návštevník
                                      Vyriesil som toooooo:)...Namiesto 6.10 som nahodil 6.06 a ono to ide...Uplne v POHO...A este rychlejsie ako 6.10....Ju tak asi skusim az FIESTY FAWN:)..DAKUJEM ZA CENNE RADY:)