MTU = 1442 MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of Registry settings. MSS = 1402 MSS is not optimized for broadband. Consider increasing your MTU value. Default TCP Receive Window (RWIN) = 5840 RWIN Scaling (RFC1323) = 3 bits (scale factor of 6) Unscaled TCP Receive Window = 730 RWIN seems to be set to a very small number. If you're on a broadband connection, consider using a larger value. For optimum performance, consider changing RWIN to a multiple of MSS. Other RWIN values that might work well with your current MTU/MSS: 515936 (MSS x 46 * scale factor of 8) 257968 (MSS x 46 * scale factor of 4) 128984 (MSS x 46 * scale factor of 2) 64492 (MSS x 46) bandwidth * delay product (Note this is not a speed test): Your TCP Window limits you to: 234 kbps (29 KBytes/s) @ 200mspripojenie je DSL od nemenovaneho monopolu.
Your TCP Window limits you to: 93 kbps (12 KBytes/s) @ 500ms Consider increasing your RWIN value to optimize TCP/IP for broadband. MTU Discovery (RFC1191) = ON Time to live left = 48 hops TTL value is ok. Timestamps (RFC1323) = ON Note: Timestamps add 12 bytes to the TCP header of each packet, reducing the space available for useful data. Selective Acknowledgements (RFC2018) = ON IP type of service field (RFC1349) = 00000000 (0)
Nejde mi o to ze by bol s internetom problem ,ale zarazaju ma tie vypisy ,ze to nie je optimalizovane pre broadband. S tym MTU to este ako tak chapem ,to je zrejme problem poskytovatela ,ale ostatne neviem.
Vypis z ifconfig:MTU:1500
poskytovatel ma (na svojich strankach uvedene) MTU 1452 (zrejme je niekde v tom teste nezrovnalost ,ked to vypisuje 1442 )
Je ziaduce mat TCP Receive Window (RWIN) nastavene na malu hodnotu?
Ak sa niekomu chce tomu venovat ,budem rad ,dakujem
