http://www.ubuntu.kayle.sk/
(54-ta strana z manualu co je dole). Zpravil som vsetko podla navodu a ked prepnem sedenie na XGL tak sa mi vypise nieco taketo :Xsession:unable to lunch "/usr/bin/startxgl" X session ---"/
usr/bin/startxgl" not found; falling back to default session
a potom nabehne defaultne sedenie. Neviete co s tym, alebo ako mam rozbehat beryla lebo uz som skusal rozne navody a akosi nic .... dik
fglrxinfomi vypiseXlib: extension "XFree86-DRI" missing on display ":0.0".display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)
takze mam asi zle nainstalovanu grafiku :( instaloval som ju podla tohto navodu
http://wiki.cchtml.com/index.php/Ubuntu_Feisty_Installation_Guideale stale som ostal vysiet v castiConfigure the Driverkde po zadani prveho prikazu mi vypiseWarning: Could not find configuration filePlease copy configuration file template to /etc/X11
a neviem co s tym ... dik
sudo aticonfig --initialby ti mal najst subor xorg.conf a prepisat v nom riadok obsahujuci nazov driver z vesa na na fglrx.sudo nano /etc/X11/xorg.confno a v nom najdi tuto sekciu::
Section "Device"Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Grap$
Driver "i810"
BusID "PCI:0:2:0"
EndSection
ked si skusal davat ten prvy prikaz, tak skus aj tento
aticonfig --initial --forcemozno zaberie a prepise ti ten ovladac nasilu. Ak nezabere, tak rucna konfiguracia.P.S. uvedeny priklad je z grafiky Intel
xorg.confvobec nemam, ale mam tam tri suboryxorg.conf.fglrx-0xorg.conf.fglrx-1xorg.conf.fglrx-2a nepomaha ani prikazaticonfig --initial --forceXlib: extension "XFree86-DRI" missing on display ":0.0".
display: :0.0 screen: 0
XFree86-DR
Ja mám nápad...hod nám sem výpis tvojho konfiguračného súboru od X-iek...
Pokiaľ príspevok nevhodný...ráčim prosim vymazať :-D
prepíš si Xorg.cong.flgrx.0....blabla
na xorg.conf
a skús ak nič tak prepíš dvojku a pak trojku
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
Load "drm"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "sk"
Option "XkbVariant" "qwerty"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
EndSection
# **********************************************************************
xorg.con by ti mal vygenerovat nejaky prikaz, len si teraz neviem spomenut aky to je v Ubuntu...# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Xerox"
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
VertRefresh 50-70
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "ATI Radeon 9000 Pro"
Driver "radeon"
VideoRam 65536
Option "AGPMode" "4"
Option "AGPFastWrite" "yes"
Option "RenderAccel" "true"
Option "ColorTiling" "on"
Option "EnablePageFlip" "on"
# pre spolupracu s AIGLX
Option "XAANoOFFscreenPixmaps" "true"
# Option "backingstore" "true"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ATI Radeon 9000 Pro"
Monitor "Xerox"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
#Section "Extensions"
# Option "Composite" "Enable"
#EndSection
tebe ta grafika fici na zavretom ovladaci ?
bo vidim tam len:
...
Driver "vga"
...
...
Driver "radeon"
...
a nikde Driver "fglrx"