Asus Wl-500gp V2

Asus WL_500gp V2 / Asus WL-500gpV2 / Asus wl-500gp v2 setup s transmission a torrentflux


stiahnite si olegov firmware, skusal som aj dd-wrt aj open-wrt.
Zatial co ma DD-Wrt oslovilo viac, ale nepodarilo sa mi prehodit jffs na externu particiu, s Olegovim FW je to jednoduchsie a rychlejsie. Open-Wrt sa mi nepodarilo nahodit (rozumej, flashoval som to raz, a ked to nenabehlo tak som to flashol spat na Olega, alebo to bolo DD potom? kazdopadne, urcite to tam pojde, ale nesnazil som sa moc)
Ja som si k nemu pripajal rovno disk, rozdelit odporucam predom,vsetko PRIMARNE particie
ja mam:
1.particia 200M ext3
2.part 250M swap
3.part zvysok

1.Stiahnut olega TU 2.pripojit sa TP kablom na router, port LAN 1-4 (ja som bezal na 4 vzdy)
3.otvorit ako ROOT rescue.exe utilitku cez wine (moja verzia 1.01)
4.odpojit router z elektriky
5.v rescue utilite vybrat firmware na flashovanie (trx alebo bin, v pripade DD-WRT) a stlacit UPLOAD
6. stlacit cierny cudlik v zadu na routri a drzat stlaceny a pripojit elektriku
7. zacne blikat POWER kontrolka asi po 10s a sucasne zacne nabiehat upload v rescue utilite, vtedy to uz mozete pustit.
8. pockat kym utilita napise ze vsetko ok a wait for reboot
9. ako kedy, oleg wacsinou rebootol, ale dd-wrt nie
10, ak to do 2 minut nerebootne samo a nezacne blikat kontrolka AIR tak to treba vytiahnut z elektriky a rebootnut to tak.
11. snad to tentokrat nabehlo
12. konzola:

telnet 192.168.1.1

13.admin/admin
14.a sme tam :) 1. uspech
15. cez web interface si nastavte vsetko co potrebujete pre pripojenie na net. vlastne vsetko co sa tam da OKREM USB/samby/NFS
16. po reboote telnet router
17. df
vypluje asi taketo daco:

/dev/discs/disc0/part1  201716748    191912 191278180   1% /tmp/mnt/disc0_1

(a pre kazdu part. to iste)
18.

umount /tmp/mnt/disc0_1

19. detto pre ostatne particie
20.

 fdisk -l

18. pravdepodnobne dostanete nieco taketo:

Disk /dev/scsi/host0/bus0/target0/lun0/disc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

                                 Device Boot    Start       End    Blocks   Id  System
/dev/scsi/host0/bus0/target0/lun0/part1               1          25      200781   83  Linux
/dev/scsi/host0/bus0/target0/lun0/part2              26          57      257040   82  Linux swap
/dev/scsi/host0/bus0/target0/lun0/part3              58       35288   282993007+  83  Linux

19.

mount -t ext3 -o noatime,rw /dev/scsi/host0/bus0/target0/lun0/part1 /opt
mkdir /opt/harddisk
mount -t ext3 -o noatime,rw /dev/scsi/host0/bus0/target0/lun0/part2 /opt/harddisk
swapon /dev/scsi/host0/bus0/target0/lun0/part2

21. kontrola:

df
free

22.

ipkg.sh install
wget http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/uclibc-opt_0.9.28-13_mipsel.ipk 
ipkg.sh install uclibc-opt_0.9.28-13_mipsel.ipk
wget http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable/ipkg-opt_0.99.163-10_mipsel.ipk 
ipkg.sh install ipkg-opt_0.99.163-10_mipsel.ipk 
ipkg update 
ipkg install nano cron screen mc diffutils hdparm less transmission

23. vsetko to bude koncit: terminated succesfuly, co znamena ze OK
24.

mkdir -p /usr/local/sbin/
touch /usr/local/sbin/post-firewall 
touch /usr/local/sbin/post-mount
touch /usr/local/sbin/pre-shutdown
touch /usr/local/sbin/pre-mount
touch /opt/etc/init.d/rc.unslung
touch /opt/etc/init.d/S99trans
chmod +x /opt/etc/init.d/S99trans
chmod +x /opt/etc/init.d/
chmod +x /usr/local/sbin/*

25.

nano /usr/local/sbin/pre-mount

ja tam mam toto:

#!/bin/sh
swapon /dev/discs/disc0/part2
e2fsck -p /dev/discs/disc0/part1
mount -t ext3 -o noatime,rw /dev/discs/disc0/part1 /opt
e2fsck -p /dev/discs/disc0/part3
mount -t ext3 -o noatime,rw /dev/discs/disc0/part3 /opt/harddisk

26.

nano /usr/local/sbin/pre-shutdown

toto:

#!/bin/sh

/opt/etc/init.d/rc.unslung stop

sleep 10s

for i in `cat /proc/mounts | awk '/ext3/{print($1)}'` ; do
  mount -o remount,ro $i
done

swapoff /dev/scsi/host0/bus0/target0/lun0/part2

sleep 1s

27.

nano /usr/local/sbin/post-mount

toto:

#!/bin/sh

/opt/etc/init.d/rc.unslung start

killall syslogd &&/sbin/syslogd -m 0 -O /opt/var/log/messages -S -l 7

28.

nano /opt/etc/init.d/rc.unslung

tot:

#! /bin/sh

# Start/stop all init scripts in /opt/etc/init.d
# starting them in numerical order and
# stopping them in reverse numerical order
#
if [ $# -ne 1 ]; then
printf "Usage: $0 {start|stop}\n" >&2
exit 1
fi

daemons=`echo $(/usr/bin/dirname $0)/S??*`
[ $1 = "stop" ] && daemons=`echo $daemons | /usr/bin/tr " " "\n" | /usr/bin/sort -r`

for i in $daemons; do

# Ignore dangling symlinks (if any).
[ ! -f "$i" ] && continue

# Write to syslog
logger -t rc.unslung "$1 service $i"

case "$i" in
*.sh)
# Source shell script for speed.
(
trap - INT QUIT TSTP
set $1
. $i
)
;;

29. a to je asi vsetko, myslim, aspon pre zatial
30.!!!!!!!!!!!!!!!!!!!!!!!!!!toto nezabudnut!!!!!!!!

flashfs save && flashfs commit && flashfs enable && reboot

31.telnet router
32. skontrolovat df a free ci je vsetko tak ako ma
34. nakonfigurovat NFS export a SMB a ftp
35. ako ftp som si dal /opt (aby som mohol konfigurovat napr. transmission)
36. na NFS odporucam http://www.root.cz/clanky/nfs-a-autofs/
37.nakonfigurovat transmission
38.

nano /opt/etc/init.d/S99trans

do toho:

#! /bin/sh

case $1 in
        start)
                /opt/bin/transmission-daemon  -w /opt/harddisk/torrent/target -g /opt/harddisk/torrent/config
                ;;
        stop)
                if [ -n "`pidof transmission-daemon`" ] ; then
                        echo "stopping transmission-daemon"
                        killall transmission-daemon
                fi
                ;;
        restart)
                $0 stop
                sleep 5
                $0 start
                ;;
        *)
                echo "usage: $0 (start|stop)"
                exit 1
esac

39.

mkdir -p /opt/harddisk/torrent/target
/opt/harddisk/torrent/config

40. /opt/etc/init.d/S99trans start
41. http://routerIP:9091/transmission/web/

vysvetlivky k transmission peratorom:
Daemon has a few nice switches
Options:
-h --help Display this help page and exit
-a --acl <list> Access Control List. (Default: +127.0.0.1)
-b --blocklist Enable peer blocklists
-B --no-blocklist Disable peer blocklists
-f --foreground Run in the foreground instead of daemonizing
-g --config-dir <path> Where to look for configuration files
-p --port <port> RPC port (Default: 9091)
-t --auth Require authentication
-T --no-auth Don't require authentication
-u --username <username> Set username for authentication
-v --password <password> Set password for authentication
-w --download-dir <path> Where to save downloaded data
42. no a asi ficime.... kazdopadne, vsetko nastavit a nazaver este raz:
43. flashfs save && flashfs commit && flashfs enable && reboot


vela stastia.
upravy prosim dopisat ;) resp. zlepsenia


pridanie torrentflux

ipkg install torrentflux lighttpd perl

zmenit/opt/etc/php.ini
dopisat do prilahlej kolonky:

extension=pdo.so
extension=sqlite.so
extension=pdo_sqlite.so

a uistite sa ze nasledovne plati:

safe_mode = Off
allow_url_fopen = On
cgi.fix_pathinfo = 1

zmenit/opt/etc/lighttpd/lighttpd.conf
odkomentovat mod_fastcgi a mod_cgi
doplnit

url.access-deny = ( "~", ".inc", ".sqlite" )

zmenit /opt/etc/lighttpd/conf.d/10-php-fcgi.conf na

fastcgi.server = ( ".php" =>
                   ( "localhost" =>
                     ( "socket" => "/tmp/php-fcgi.sock",
                       "bin-path" => "/opt/bin/php-fcgi",
                       "max-procs" => 1,
                       "min-procs" => 1,
                       "max-load-per-proc" => 4,
                     )
                   )
                 )

no a potom uz len:

/opt/etc/init.d/S80lighttpd stop
/opt/etc/init.d/S80lighttpd start

http://nas_address:8081/torrentflux

bud vam nabehne setup na nastavenie user/hesla, alebo je prihlasovasie meno take iste ako ma user na routeri.


na rozchodenie Mc

export TERMINFO="/opt/share/terminfo"
export TERM="xterm"
/opt/bin/mc