ati driver?
ahoj...som novacik a xem sa spytat...mam PcLinuxOs a ked som ho nainstaloval,neriesil som absolutne ziadne drivere,ani nic...setko ide...mam ATI Radeon 9000 a celkom slaby comp.(1GH,512ram,...) treba mi stiahnut nejaky driver na neho,alebo je to oki??hry moc nehravam (sak slaby comp),ale skusal som pre zaujimavost spustit Warcraft 3,kt.isiel vo windowse uplne bez problemov,ale cez wine strasne sekal...kde sa stal problem??ps: Toto distro linuxu asi ovela viac zpomaluje pc a je grafic.narocnejsie ako win.XP...co??
Pre pridávanie komentárov sa musíte prihlásiť.
Ja osobne mám nVidia, takže neviem aké sú drivers pre ATI.
Ak chceš vedieť, či máš 3D podporu nainštalovanú, tak v konzole spusti toto:
glxinfo | grep directbude tam niečo ako "direct rendering: no" alebo "direct rendering: yes"
takže šup šup do inštalácie driveru a testovania direct render :)
ja na gf4 mx 440 neprehram slusne flash bohuzial a vo win mi ide krasne. proste na mojej zostave a pri mojich 'ukonoch' je win xp ovela sviznejsi napriek tomu, ze linux mi zerie menej ramky ako win.
pozri si do xorg.conf, aky ovladac pouzivas. radeon ci fglrx? prikaz
cat /etc/X11/xorg.conf | grep Driver popripade jeden z prikazov: lsmod | grep radeon, lsmod | grep fglrx
by ti to mohol vypisat
dalej, ci mas 3d podporu, zistis prikazom:
glxinfo | grep direct
ak ti vypise riadok s yes, tak mas, ak riadok s no, tak nemas
a nakoniec skus: glxgears a sleduj, kolko fps dostanes, potom bez na google a porovnaj si to s ludmi, co maju podobne grafiky, ci to mas dobre nainstalovane alebo nie, mne dava gf4 mx priblizne 1700fps, tvoja by mala davat o cosi viac, ak nie je zbastardena
tie glx prikazy ti nemusia fungovat, tak sa nezlakni :)
napis, co a ako a potom mozeme vsetci dumat dalej
otvor synaptic a nainstaluj "ATI" balik
restartuje ti to X a potom restartuj PC a si vyrieseny
nestras, podpora hardware z x.org alebo xfree86 sa nevyhadzuje aspon co ja na gentoo viem. takze treba vyskusat ovladace ati alebo radeon.
Momentalne mam nainstalovane (cez YUM) ATI-legacy-fglrx 8.28.8-11.oc2
Driver je tu: http://ati.amd.com/support/drivers/linux/previous/linux-r-8-28-8.html
Je tam linka na installer instructions a FAQ.
Myslim ze tam treba aj nieco s Kernelom:
If a Linux 2.6.11 or newer kernel was built with CONFIG_AGP enabled, the kernel AGP frontend is required to load the fglrx kernel module. To identify whether your kernel was built with CONFIG_AGP enabled, look for CONFIG_AGP=y in the kernel config file, or if the 'agpgart' module loaded.
Moj xorg.conf vyzera takto:
# Xorg configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dri"
Load "glx"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Synaptics"
Driver "synaptics"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons" "yes"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "MonitorLayout" "AUTO, CRT"
Option "DesktopSetup" "0x00000100"
Option "EnableMonitor" "lvds,crt1"
Option "ForceMonitors" "lvds,crt1"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "MonitorLayout" "AUTO, CRT"
Option "DesktopSetup" "0x00000100"
Option "EnableMonitor" "lvds,crt1"
Option "ForceMonitors" "lvds,crt1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
vela stastia