Wifi karta

Sekcia: Hardware a Drivery 20.05.2007 | 14:10
jano   Návštevník
Caute zufalo sa snazim naistalovat ndiswrapper, ktory vraj potrebujem aby mi fungovala wifi karta:
02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Mam Fedoru core 6, na nete som nasiel zaujimavy navod
http://fedoranews.org/mediawiki/index.php/How_To_Install_Your_Broadcom_BCM4318_Using_Ndiswrapper
Bohuzial pri prikaze:
yum install ndiswrapper kernel-module-ndiswrapper-$(uname -r)
mi vypisal toto:
[root@localhost /]# yum install ndiswrapper kernel-module-ndiswrapper-$(uname -r)
Loading "installonlyn" plugin
Repository livna is listed more than once in the configuration
Setting up Install Process
Setting up repositories
http://wftp.tu-chemnitz.de/pub/linux/livna/fedora/6/i386/RPMS.lvn/repodata/repomd.xml: [Errno 14] HTTP Error 404: Date: Sun, 20 May 2007 10:00:49 GMT
Server: Apache/2.0.52 (Red Hat)
Content-Length: 388
Content-Type: text/html; charset=iso-8859-1

Trying other mirror.
http://ftp-stud.fht-esslingen.de/pub/Mirrors/rpm.livna.org/fedora/6/i386/RPMS.lvn/repodata/repomd.xml: [Errno 14] HTTP Error 404: Date: Sun, 20 May 2007 10:00:49 GMT
Server: Apache/2.2.4 (Fedora)
Vary: accept-language,accept-charset
Accept-Ranges: bytes
Transfer-Encoding: chunked
Content-Type: text/html; charset=iso-8859-1
Content-Language: en

Trying other mirror.
http://livna.cat.pdx.edu/fedora/6/i386/RPMS.lvn/repodata/repomd.xml: [Errno 14] HTTP Error 404: Server: nginx/0.4.13
Date: Sun, 20 May 2007 10:00:49 GMT
Content-Type: text/html
Content-Length: 169
Connection: keep-alive

Trying other mirror.
http://rpm.livna.org/fedora/6/i386/RPMS.lvn/repodata/repomd.xml: [Errno 14] HTTP Error 404: Date: Sun, 20 May 2007 10:00:50 GMT
Server: Apache/2.0.51 (Fedora)
Content-Length: 321
Connection: close
Content-Type: text/html; charset=iso-8859-1

Trying other mirror.
Error: Cannot open/read repomd.xml file for repository: livna
[root@localhost /]#
Tak som zacal guuglit a nasiel som toto:
http://www.linuxquestions.org/questions/showthread.php?t=503420
skusil som teda prikaz:
#yum update --disablerepo=livna
tam sa mi zasekla aktualizacia xine-lib(ale to nie je asi podstatne)... a odvtedy mi nejde Add/Remove Software a taktiez Software Updater(sprava sa ako keby som nebol pripojeny na internet)...
Mam na Vas teda 2 otazky:

Vie mi niekto poradit ako opravim Add/Remove Software ?

Vie mi niekto pomoct rozbehat tu wifi kartu?

Vopred dakujem za kazdu odpoved.

Pekny den prajem.
    • Re: Wifi karta 20.05.2007 | 14:39
      Avatar borg Arch, Debian jessie  Administrátor
      driver na tu kartu je v novsich kerneloch, staci len stiahnut firmware a nakopirovat ho do /lib/firmware
      • Re: Wifi karta 20.05.2007 | 17:36
        Jano   Návštevník
        ok no len neviem ci je presne to co mas na mysli...
        http://sysadmin.ic.cz/files/bcm4318.tar.bz2

        tieto subory som tam nakopiroval potom som restartol komp a spustil tieto programy KWifiManager, AirSnort ale ani jeden mi neukazuje siete... nevies co robim zle... pripadne poznas daky dobry program vyhladavanie sieti?

        vdaka
        • Re: Wifi karta 20.05.2007 | 19:20
          Avatar borg Arch, Debian jessie  Administrátor
          modul je natiahnuty? dmesg co hovori? skus lsmod | grep bcm ci ti zobrazi natiahnuty modul pre kartu
          • Re: Wifi karta 20.05.2007 | 19:33
            Jano   Návštevník
            No ja som len zaciatocnik Linux mam iba 3 mesiace takze ti tu prekopcim co mi to vypisalo:
            [root@localhost ~]# lsmod | grep bcm bcm43xx 419937 0
            ieee80211softmac 35649 1 bcm43xx
            ieee80211 35209 2 bcm43xx,ieee80211softmac
            [root@localhost ~]#

            [root@localhost ~]# dmesg Linux version 2.6.20-1.2948.fc6 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Fri Apr 27 18:53:15 EDT 2007
            BIOS-provided physical RAM map:
            sanitize start
            sanitize end
            copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
            copy_e820_map() type is E820_RAM
            copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
            copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
            copy_e820_map() start: 0000000000100000 size: 0000000017ed0000 end: 0000000017fd0000 type: 1
            copy_e820_map() type is E820_RAM
            copy_e820_map() start: 0000000017fd0000 size: 000000000000e000 end: 0000000017fde000 type: 3
            copy_e820_map() start: 0000000017fde000 size: 0000000000022000 end: 0000000018000000 type: 4
            copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
            copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2
            BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
            BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
            BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
            BIOS-e820: 0000000000100000 - 0000000017fd0000 (usable)
            BIOS-e820: 0000000017fd0000 - 0000000017fde000 (ACPI data)
            BIOS-e820: 0000000017fde000 - 0000000018000000 (ACPI NVS)
            BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
            BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
            0MB HIGHMEM available.
            383MB LOWMEM available.
            Using x86 segment limits to approximate NX protection
            Entering add_active_range(0, 0, 98256) 0 entries of 256 used
            Zone PFN ranges:
            DMA 0 -> 4096
            Normal 4096 -> 98256
            HighMem 98256 -> 98256
            early_node_map[1] active PFN ranges
            0: 0 -> 98256
            On node 0 totalpages: 98256
            DMA zone: 40 pages used for memmap
            DMA zone: 0 pages reserved
            DMA zone: 4056 pages, LIFO batch:0
            Normal zone: 919 pages used for memmap
            Normal zone: 93241 pages, LIFO batch:31
            HighMem zone: 0 pages used for memmap
            DMI 2.3 present.
            Using APIC driver default
            ACPI: RSDP (v000 ACPIAM ) @ 0x000f85d0
            ACPI: RSDT (v001 A M I OEMRSDT 0x03000628 MSFT 0x00000097) @ 0x17fd0000
            ACPI: FADT (v002 A M I OEMFACP 0x03000628 MSFT 0x00000097) @ 0x17fd0200
            ACPI: MADT (v001 A M I OEMAPIC 0x03000628 MSFT 0x00000097) @ 0x17fd0390
            ACPI: MCFG (v001 A M I OEMMCFG 0x03000628 MSFT 0x00000097) @ 0x17fd03f0
            ACPI: BOOT (v001 A M I OEMBOOT 0x03000628 MSFT 0x00000097) @ 0x17fd0430
            ACPI: OEMB (v001 A M I AMI_OEM 0x03000628 MSFT 0x00000097) @ 0x17fde040
            ACPI: SSDT (v001 AMI CPU_CST 0x00000001 INTL 0x02002026) @ 0x17fd6d20
            ACPI: DSDT (v001 AMJG_ AMJG_B32 0x00000b32 INTL 0x02002026) @ 0x00000000
            • Pokracovanie 1 20.05.2007 | 19:36
              Jano   Návštevník
              ATI board detected. Disabling timer routing over 8254.
              ACPI: PM-Timer IO Port: 0x808
              ACPI: Local APIC address 0xfee00000
              ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
              Processor #0 6:13 APIC version 20
              ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
              IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
              ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
              ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
              ACPI: IRQ0 used by override.
              ACPI: IRQ2 used by override.
              Enabling APIC mode: Flat. Using 1 I/O APICs
              Using ACPI (MADT) for SMP configuration information
              Allocating PCI resources starting at 20000000 (gap: 18000000:e6e00000)
              Detected 1700.158 MHz processor.
              Built 1 zonelists. Total pages: 97297
              Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
              mapped APIC to ffffd000 (fee00000)
              mapped IOAPIC to ffffc000 (fec00000)
              Enabling fast FPU save and restore... done.
              Enabling unmasked SIMD FPU exception support... done.
              Initializing CPU#0
              CPU 0 irqstacks, hard=c079a000 soft=c077a000
              PID hash table entries: 2048 (order: 11, 8192 bytes)
              Console: colour VGA+ 80x25
              Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
              Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
              Memory: 381696k/393024k available (2156k kernel code, 10712k reserved, 1128k data, 232k init, 0k highmem)
              virtual kernel memory layout:
              fixmap : 0xffc55000 - 0xfffff000 (3752 kB)
              pkmap : 0xff800000 - 0xffc00000 (4096 kB)
              vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
              lowmem : 0xc0000000 - 0xd7fd0000 ( 383 MB)
              .init : 0xc073b000 - 0xc0775000 ( 232 kB)
              .data : 0xc061b2a9 - 0xc0735494 (1128 kB)
              .text : 0xc0400000 - 0xc061b2a9 (2156 kB)
              Checking if this processor honours the WP bit even in supervisor mode... Ok.
              Calibrating delay using timer specific routine.. 3402.57 BogoMIPS (lpj=1701289)
              Security Framework v1.0.0 initialized
              SELinux: Initializing.
              SELinux: Starting in permissive mode
              selinux_register_security: Registering secondary module capability
              Capability LSM initialized as secondary
              Mount-cache hash table entries: 512
              CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000
              CPU: L1 I cache: 32K, L1 D cache: 32K
              CPU: L2 cache: 1024K
              CPU: After all inits, caps: afe9f3ff 00100000 00000000 00002040 00000000 00000000 00000000
              Intel machine check architecture supported.
              Intel machine check reporting enabled on CPU#0.
              Checking 'hlt' instruction... OK.
              SMP alternatives: switching to UP code
              Freeing SMP alternatives: 12k freed
              ACPI: Core revision 20060707
              CPU0: Intel(R) Celeron(R) M processor 1.70GHz stepping 08
              Total of 1 processors activated (3402.57 BogoMIPS).
              ENABLING IO-APIC IRQs
              ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
              ..MP-BIOS bug: 8254 timer not connected to IO-APIC
              ...trying to set up timer (IRQ0) through the 8259A ... failed.
              ...trying to set up timer as Virtual Wire IRQ... works.
              Brought up 1 CPUs
              sizeof(vma)=84 bytes
              sizeof(page)=40 bytes
              sizeof(inode)=420 bytes
              sizeof(dentry)=144 bytes
              sizeof(ext3inode)=596 bytes
              sizeof(buffer_head)=56 bytes
              sizeof(skbuff)=176 bytes
              sizeof(task_struct)=1408 bytes
              NET: Registered protocol family 16
              ACPI: bus type pci registered
              PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
              PCI: Using configuration type 1
              Setting up standard PCI resources
              ACPI: Interpreter enabled
              ACPI: Using IOAPIC for interrupt routing
              ACPI: PCI Root Bridge [PCI0] (0000:00)
              PCI: Probing PCI hardware (bus 00)
              0000:00:14.1: trying to change BAR0 from 01F0 to 01F0
              0000:00:14.1: trying to change BAR1 from 03F4 to 03F4
              0000:00:14.1: trying to change BAR2 from 0170 to 0170
              0000:00:14.1: trying to change BAR3 from 0374 to 0374
              Boot video device is 0000:01:05.0
              PCI: Transparent bridge - 0000:00:14.4
              PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
              Please report the result to linux-kernel to fix this permanently
              ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
              ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
              ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
              ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
              ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
              ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
              ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
              ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
              ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
              ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
              ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
              • Re: Pokracovanie 2 20.05.2007 | 19:41
                Jano   Návštevník
                ACPI: Power Resource [GFAN] (off)
                Linux Plug and Play Support v0.97 (c) Adam Belay
                pnp: PnP ACPI init
                pnp: PnP ACPI: found 14 devices
                usbcore: registered new interface driver usbfs
                usbcore: registered new interface driver hub
                usbcore: registered new device driver usb
                PCI: Using ACPI for IRQ routing
                PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
                PCI: Cannot allocate resource region 3 of device 0000:00:00.0
                NetLabel: Initializing
                NetLabel: domain hash size = 128
                NetLabel: protocols = UNLABELED CIPSOv4
                NetLabel: unlabeled traffic allowed by default
                pnp: 00:07: ioport range 0xa00-0xa0f has been reserved
                PCI: Bridge: 0000:00:01.0
                IO window: 9000-9fff
                MEM window: fe100000-fe1fffff
                PREFETCH window: bdf00000-ddefffff
                PCI: Bus 3, cardbus bridge: 0000:02:01.0
                IO window: 0000a000-0000a0ff
                IO window: 0000a400-0000a4ff
                PREFETCH window: 24000000-27ffffff
                MEM window: 28000000-2bffffff
                PCI: Bridge: 0000:00:14.4
                IO window: a000-bfff
                MEM window: fe200000-feafffff
                PREFETCH window: ddf00000-dfefffff
                ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
                NET: Registered protocol family 2
                IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
                TCP established hash table entries: 16384 (order: 6, 327680 bytes)
                TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
                TCP: Hash tables configured (established 16384 bind 8192)
                TCP reno registered
                checking if image is initramfs... it is
                Freeing initrd memory: 2133k freed
                Simple Boot Flag at 0xff set to 0x1
                apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
                apm: overridden by ACPI.
                audit: initializing netlink socket (disabled)
                audit(1179673375.655:1): initialized
                Total HugeTLB memory allocated, 0
                VFS: Disk quotas dquot_6.5.1
                Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
                SELinux: Registering netfilter hooks
                ksign: Installing public key data
                Loading keyring
                - Added public key D8906D8AE5DBA77
                - User ID: Red Hat, Inc. (Kernel Module GPG key)
                io scheduler noop registered
                io scheduler anticipatory registered
                io scheduler deadline registered
                io scheduler cfq registered (default)
                ACPI: Transitioning device [FN00] to D3
                ACPI: Transitioning device [FN00] to D3
                ACPI: Fan [FN00] (off)
                ACPI: CPU0 (power states: C1[C1] C2[C2])
                ACPI: Processor [CPU1] (supports 8 throttling states)
                ACPI: Thermal Zone [THRM] (55 C)
                isapnp: Scanning for PnP cards...
                isapnp: No Plug & Play device found
                Real Time Clock Driver v1.12ac
                Non-volatile memory driver v1.2
                Linux agpgart interface v0.101 (c) Dave Jones
                Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
                serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
                ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
                ACPI: PCI interrupt for device 0000:00:14.6 disabled
                RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
                input: Macintosh mouse button emulation as /class/input/input0
                Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
                ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
                ATIIXP: IDE controller at PCI slot 0000:00:14.1
                ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
                ATIIXP: chipset revision 128
                ATIIXP: not 100% native mode: will probe irqs later
                ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
                ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
                Probing IDE interface ide0...
                hda: HTS421280H9AT00, ATA DISK drive
                hda: hw_config=600b
                hda: hw_config=600b
                ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
                Probing IDE interface ide1...
                hdc: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive
                ide1 at 0x170-0x177,0x376 on irq 15
                hda: max request size: 512KiB
                hda: 156301488 sectors (80026 MB) w/7528KiB Cache, CHS=16383/255/63<6>hda: hw_config=600b
                , UDMA(100)
                hda: cache flushes supported
                hda: hda1 hda2 < hda5 > hda3 hda4
                ide-floppy driver 0.99.newide
                Yenta: CardBus bridge found at 0000:02:01.0 [1043:1187]
                Yenta: ISA IRQ mask 0x06b8, PCI irq 16
                Socket status: 30000006
                Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
                pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
                cs: IO port probe 0xa000-0xbfff: clean.
                pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff
                pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff
                usbcore: registered new interface driver libusual
                usbcore: registered new interface driver hiddev
                usbcore: registered new interface driver usbhid
                • Re: Pokracovanie 3 20.05.2007 | 19:42
                  Jano   Návštevník
                  drivers/usb/input/hid-core.c: v2.6:USB HID core driver
                  PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
                  i8042.c: Detected active multiplexing controller, rev 1.1.
                  serio: i8042 KBD port at 0x60,0x64 irq 1
                  serio: i8042 AUX0 port at 0x60,0x64 irq 12
                  serio: i8042 AUX1 port at 0x60,0x64 irq 12
                  serio: i8042 AUX2 port at 0x60,0x64 irq 12
                  serio: i8042 AUX3 port at 0x60,0x64 irq 12
                  mice: PS/2 mouse device common for all mice
                  TCP bic registered
                  Initializing XFRM netlink socket
                  NET: Registered protocol family 1
                  NET: Registered protocol family 17
                  Using IPI No-Shortcut mode
                  ACPI: (supports S0 S1 S3 S4 S5)
                  Time: tsc clocksource has been installed.
                  Time: acpi_pm clocksource has been installed.
                  Freeing unused kernel memory: 232k freed
                  Write protecting the kernel read-only data: 819k
                  firmware_class: attempt to set timeout to 10
                  USB Universal Host Controller Interface driver v3.0
                  ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
                  ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
                  ohci_hcd 0000:00:13.0: OHCI Host Controller
                  ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
                  ohci_hcd 0000:00:13.0: irq 18, io mem 0xfebff000
                  input: PS/2 Mouse as /class/input/input1
                  usb usb1: configuration #1 chosen from 1 choice
                  hub 1-0:1.0: USB hub found
                  hub 1-0:1.0: 4 ports detected
                  input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
                  input: AT Translated Set 2 keyboard as /class/input/input3
                  ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
                  ohci_hcd 0000:00:13.1: OHCI Host Controller
                  ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
                  ohci_hcd 0000:00:13.1: irq 18, io mem 0xfebfe000
                  usb usb2: configuration #1 chosen from 1 choice
                  hub 2-0:1.0: USB hub found
                  hub 2-0:1.0: 4 ports detected
                  ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
                  ehci_hcd 0000:00:13.2: EHCI Host Controller
                  ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
                  ehci_hcd 0000:00:13.2: irq 18, io mem 0xfebfd000
                  ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
                  usb usb3: configuration #1 chosen from 1 choice
                  hub 3-0:1.0: USB hub found
                  hub 3-0:1.0: 8 ports detected
                  device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
                  usb 3-5: new high speed USB device using ehci_hcd and address 3
                  usb 3-5: configuration #1 chosen from 1 choice
                  usb 2-1: new low speed USB device using ohci_hcd and address 2
                  usb 2-1: configuration #1 chosen from 1 choice
                  input: Logitech Optical USB Mouse as /class/input/input4
                  input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1
                  kjournald starting. Commit interval 5 seconds
                  EXT3-fs: mounted filesystem with ordered data mode.
                  audit(1179673383.635:2): enforcing=1 old_enforcing=0 auid=4294967295
                  security: 3 users, 6 roles, 1630 types, 179 bools, 1 sens, 1024 cats
                  security: 60 classes, 51372 rules
                  SELinux: Completing initialization.
                  SELinux: Setting up existing superblocks.
                  SELinux: initialized (dev dm-0, type ext3), uses xattr
                  SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
                  SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
                  SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
                  SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
                  SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
                  SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
                  SELinux: initialized (dev devpts, type devpts), uses transition SIDs
                  SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
                  SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
                  SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
                  SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
                  SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
                  SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
                  SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
                  SELinux: initialized (dev proc, type proc), uses genfs_contexts
                  SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
                  SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
                  SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
                  • Re: Pokracovanie 4 20.05.2007 | 19:43
                    Jano   Návštevník
                    audit(1179673383.984:3): policy loaded auid=4294967295
                    input: PC Speaker as /class/input/input5
                    hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
                    Uniform CD-ROM driver Revision: 3.20
                    ieee80211_crypt: registered algorithm 'NULL'
                    8139too Fast Ethernet driver 0.9.28
                    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 19
                    eth0: RealTek RTL8139 at 0xd885cc00, 00:17:31:ac:33:79, IRQ 19
                    eth0: Identified 8139 chip type 'RTL-8100B/8139D'
                    sdhci: Secure Digital Host Controller Interface driver, 0.12
                    sdhci: Copyright(c) Pierre Ossman
                    sdhci: SDHCI controller found at 0000:02:01.1 [1180:0822] (rev 17)
                    ACPI: PCI Interrupt 0000:02:01.1[C] -> GSI 18 (level, low) -> IRQ 20
                    sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support.
                    mmc0: SDHCI at 0xfeaff800 irq 20 DMA
                    parport: PnPBIOS parport detected.
                    parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
                    ieee80211: 802.11 data/management/control stack, git-1.1.13
                    ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
                    piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
                    8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
                    bcm43xx driver
                    ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 22 (level, low) -> IRQ 22
                    bcm43xx: Chip ID 0x4318, rev 0x2
                    bcm43xx: Number of cores: 4
                    bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243
                    bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243
                    bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243
                    bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243
                    bcm43xx: PHY connected
                    bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
                    bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
                    bcm43xx: Radio turned off
                    bcm43xx: Radio turned off
                    ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
                    MC'97 1 converters and GPIO not ready (0xff00)
                    ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
                    cs: IO port probe 0x100-0x3af: clean.
                    cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7
                    cs: IO port probe 0x820-0x8ff: excluding 0x830-0x837
                    cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
                    cs: IO port probe 0xa00-0xaff: clean.
                    floppy0: no floppy controllers found
                    lp0: using parport0 (interrupt-driven).
                    lp0: console ready
                    sonypi: Sony Programmable I/O Controller Driver v1.26.
                    SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
                    NET: Registered protocol family 10
                    lo: Disabled Privacy Extensions
                    Mobile IPv6
                    ACPI: AC Adapter [AC0] (on-line)
                    ACPI: Battery Slot [BAT0] (battery absent)
                    input: Power Button (FF) as /class/input/input6
                    ACPI: Power Button (FF) [PWRF]
                    input: Lid Switch as /class/input/input7
                    ACPI: Lid Switch [LID]
                    input: Sleep Button (CM) as /class/input/input8
                    ACPI: Sleep Button (CM) [SLPB]
                    input: Power Button (CM) as /class/input/input9
                    ACPI: Power Button (CM) [PWRB]
                    No dock devices found.
                    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
                    md: Autodetecting RAID arrays.
                    md: autorun ...
                    md: ... autorun DONE.
                    device-mapper: multipath: version 1.0.5 loaded
                    EXT3 FS on dm-0, internal journal
                    kjournald starting. Commit interval 5 seconds
                    EXT3 FS on hda3, internal journal
                    EXT3-fs: mounted filesystem with ordered data mode.
                    SELinux: initialized (dev hda3, type ext3), uses xattr
                    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
                    SELinux: initialized (dev hda5, type vfat), uses genfs_contexts
                    Adding 786424k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:786424k
                    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
                    ip_tables: (C) 2000-2006 Netfilter Core Team
                    Netfilter messages via NETLINK v0.30.
                    nf_conntrack version 0.5.0 (3070 buckets, 24560 max)
                    ip6_tables: (C) 2000-2006 Netfilter Core Team
                    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
                    eth0: no IPv6 routers present
                    SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
                    Bluetooth: Core ver 2.11
                    NET: Registered protocol family 31
                    Bluetooth: HCI device and connection manager initialized
                    Bluetooth: HCI socket layer initialized
                    Bluetooth: L2CAP ver 2.8
                    Bluetooth: L2CAP socket layer initialized
                    Bluetooth: RFCOMM socket layer initialized
                    Bluetooth: RFCOMM TTY layer initialized
                    Bluetooth: RFCOMM ver 1.8
                    Bluetooth: HIDP (Human Interface Emulation) ver 1.1
                    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
                    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
                    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
                    bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
                    SoftMAC: Associate: Scanning for networks first.
                    SoftMAC: Associate: failed to initiate scan. Is device up?
                    • Re: Pokracovanie 5 20.05.2007 | 19:44
                      Jano   Návštevník
                      bcm43xx: PHY connected
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts
                      bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
                      SoftMAC: Associate: Scanning for networks first.
                      SoftMAC: Associate: failed to initiate scan. Is device up?
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      SoftMAC: Associate: Scanning for networks first.
                      SoftMAC: Associate: failed to initiate scan. Is device up?
                      bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
                      bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
                      bcm43xx: core_up for active 802.11 core failed (-2)
                      audit(1179671527.405:4): avc: denied { execmod } for pid=8097 comm="amarokapp" name="libdvdcss.so.2.0.8" dev=dm-0 ino=445714 scontext=root:system_r:unconfined_t:s0-s0:c0.c1023 tcontext=system_u:object_r:lib_t:s0 tclass=file
                      eth0: link down
                      eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
                      • Re: Pokracovanie 5 20.05.2007 | 19:49
                        Avatar borg Arch, Debian jessie  Administrátor
                        yum install bcm43xx-fwcutter

                        nainstaluje firmware

                        alebo skus tuto stranku pozret:
                        http://fedoramobile.org/fc-wireless/bcm43xx-yum-extras/
                        • Re: Pokracovanie 5 20.05.2007 | 20:07
                          Jano   Návštevník
                          [root@localhost ~]# yum install bcm43xx-fwcutter
                          Loading "installonlyn" plugin
                          Setting up Install Process
                          Setting up repositories
                          Reading repository metadata in from local files
                          Parsing package install arguments
                          Resolving Dependencies
                          --> Populating transaction set with selected packages. Please wait.
                          ---> Downloading header for bcm43xx-fwcutter to pack into transaction set.
                          bcm43xx-fwcutter-005-1.fc 100% |=========================| 3.3 kB 00:00
                          ---> Package bcm43xx-fwcutter.i386 0:005-1.fc6 set to be updated
                          --> Running transaction check

                          Dependencies Resolved

                          =============================================================================
                          Package Arch Version Repository Size
                          =============================================================================
                          Installing:
                          bcm43xx-fwcutter i386 005-1.fc6 extras 23 k

                          Transaction Summary
                          =============================================================================
                          Install 1 Package(s)
                          Update 0 Package(s)
                          Remove 0 Package(s)

                          Total download size: 23 k
                          Is this ok [y/N]: y
                          Downloading Packages:
                          (1/1): bcm43xx-fwcutter-0 100% |=========================| 23 kB 00:01
                          Running Transaction Test
                          Finished Transaction Test
                          Transaction Test Succeeded
                          Running Transaction
                          Installing: bcm43xx-fwcutter ######################### [1/1]

                          Installed: bcm43xx-fwcutter.i386 0:005-1.fc6
                          Complete!



                          Hotovo ale co teraz? :-(
                          • FUNGUJE 20.05.2007 | 21:03
                            Jano   Návštevník
                            no parada nemozem sa sice napojit nemam siet ale aspon uz vidim cudzie siete takze dufam ze to uz pojde....

                            DAKUJEM som rad ze mi to uz konecne funguje zase som o krok blizsie k vymazaniu Windows... ;-)

    • Re: Wifi karta 20.05.2007 | 19:57
      stando   Návštevník
      zdravim,
      ja som rozbehaval wifi na FC5(2.6.20) a bcm43xx mi bohvie ako neslo...niekde som cital, ze to treba opatchovat, alebo co...uz si presne nepamatam...

      ndiswrapper - fungoval asi po 10 minut prace. Staci spustit nad ovladacmi z Win.

      yum - pozri /etc/yum.repos.d/livna.repo(polozka enabled)
      • Re: Wifi karta 20.05.2007 | 20:12
        Jano   Návštevník
        No jo lenze mne to nejde ani scompilovat a ani balicek rpm naistalovat... Vypise to ze potrebuje jadro-2.6.20-1.2948.fc6 lenze to mam nainstalovane!!! tak som ho dal stiahnut a pri instalacii vypisal toto:

        [('package kernel-2.6.20-1.2948.fc6 is already installed', (2, None, 0L)), ('file /boot/System.map-2.6.20-1.2948.fc6 from install of kernel-2.6.20-1.2948.fc6 conflicts with file from package kernel-2.6.20-1.2948.fc6', (7, '/boot/System.map-2.6.20-1.2948.fc6', 0L)), ('file /boot/config-2.6.20-1.2948.fc6 from install of kernel-2.6.20-1.2948.fc6 conflicts with file from package kernel-2.6.20-1.2948.fc6', (7, '/boot/config-2.6.20-1.2948.fc6', 0L)), ('file /boot/symvers-2.6.20-1.2948.fc6.gz from install of kernel-2.6.20-1.2948.fc6 conflicts with file from package kernel-2.6.20-1.2948.fc6', (7, '/boot/symvers-2.6.20-1.2948.fc6.gz', 0L)), ('file /boot/vmlinuz-2.6.20-1.2948.fc6 from install of kernel-2.6.20-1.2948.fc6 conflicts with file from package kernel-2.6.20-1.2948.fc6', (7, '/boot/vmlinuz-2.6.20-1.2948.fc6', 0L))]

        dik yum mi uz ide... :-)