SATA problemy ?

Sekcia: Hardware a Drivery 25.05.2007 | 11:53
GreX   Návštevník
Neviem presne o aku chybu ide ale system mi to vzdy zhodi do read-only rezimu:
jedna sa o server proliant 320 od HP
ubuntu 6.0.6 LTS
kernel 2.6.15-28-server ... Linux bserver 2.6.15-28-server #1 SMP Tue Mar 13 21:09:03 UTC 2007 i686 GNU/Linux
a chyba v syslogu je:
May 24 19:47:34 bserver kernel: [ 42963698.300000] ata1: command 0x35 timeout, stat 0xd0 host_stat 0x20
May 24 19:47:34 bserver kernel: [42963698.300000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
May 24 19:47:34 bserver kernel: [ 42963698.300000] ata1: status=0xd0 { Busy }
May 24 19:47:34 bserver kernel: [42963698.300000] sd 0:0:0:0: SCSI error: return code = 0x8000002
May 24 19:47:34 bserver kernel: [42963698.300000] sda: Current: sense key: Aborted Command
May 24 19:47:34 bserver kernel: [42963698.300000] Additional sense: Scsi parity error
May 24 19:47:34 bserver kernel: [42963698.300000] end_request: I/O error, dev sda, sector 98935
May 24 19:48:04 bserver kernel: [ 42963728.310000] ata1: command 0x35 timeout, stat 0xd0 host_stat 0x21
May 24 19:48:04 bserver kernel: [42963728.310000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
May 24 19:48:04 bserver kernel: [ 42963728.310000] ata1: status=0xd0 { Busy }
May 24 19:48:04 bserver kernel: [42963728.310000] sd 0:0:0:0: SCSI error: return code = 0x8000002
May 24 19:48:04 bserver kernel: [42963728.310000] sda: Current: sense key: Aborted Command
May 24 19:48:04 bserver kernel: [42963728.310000] Additional sense: Scsi parity error
May 24 19:48:04 bserver kernel: [42963728.310000] end_request: I/O error, dev sda, sector 98943
May 24 19:48:34 bserver kernel: [ 42963758.320000] ata1: command 0x35 timeout, stat 0xd0 host_stat 0x21
May 24 19:48:34 bserver kernel: [42963758.320000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
May 24 19:48:34 bserver kernel: [ 42963758.320000] ata1: status=0xd0 { Busy }
May 24 19:48:34 bserver kernel: [42963758.320000] sd 0:0:0:0: SCSI error: return code = 0x8000002
May 24 19:48:34 bserver kernel: [42963758.320000] sda: Current: sense key: Aborted Command
May 24 19:48:34 bserver kernel: [42963758.320000] Additional sense: Scsi parity error
May 24 19:48:34 bserver kernel: [42963758.320000] end_request: I/O error, dev sda, sector 98951
May 24 19:49:04 bserver kernel: [ 42963788.330000] ata1: command 0x35 timeout, stat 0xd0 host_stat 0x21
May 24 19:49:04 bserver kernel: [42963788.330000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
May 24 19:49:04 bserver kernel: [ 42963788.330000] ata1: status=0xd0 { Busy }
May 24 19:49:04 bserver kernel: [42963788.330000] sd 0:0:0:0: SCSI error: return code = 0x8000002
May 24 19:49:04 bserver kernel: [42963788.330000] sda: Current: sense key: Aborted Command
May 24 19:49:04 bserver kernel: [42963788.330000] Additional sense: Scsi parity error

viete mi poradit co stym? napada ma ze ci sa pri prenose bedne nepovystrcil kabel, ci neodchadza nieco na HDD alebo ci len su problemi s nejakym drivrom alebo co ? je tam prpojeny 80GB SATA disk

    • Re: SATA problemy ? 25.05.2007 | 13:49
      cezz   Návštevník
      Aku mas dosku a sata disk? Je hdd SATA2?
      • Re: SATA problemy ? 25.05.2007 | 17:31
        GreX   Návštevník
        on je to server HP proliant DL320 viac info nemam momentalne ale asi NIEJE SATA2
    • Re: SATA problemy ? 25.05.2007 | 19:03
      Avatar Peter Drábik Manjaro  Používateľ
      ach, sata... pridaj medzi parametre kernelu v grube
      irqpoll
      • SATA problemy ? 28.05.2007 | 09:51
        GreX   Návštevník
        Este pre uzrejmenie situacie:
        Pocas instalacie server (tj. 3 dni) fungoval bez problemov. po preneseni do server housingu dalsie 3 dni v pohode a az na 3.den vecer vypadol prvy krat. Nasledne som sa pokusil len repairovat disk cez FSCK co mu trvalo tak polhodku a odstranil udajne asi 15 chyb. potom zas bezal ok a vecer sa zas vyrubal. Dufam ze neni odstrany HDD pretoze ten server ma 2 tyzdne
        • Re: SATA problemy ? 28.05.2007 | 10:18
          Avatar WhiteRaven Gentoo  Používateľ
          Ak fungoval a zrazu prestal, tak to naozaj vyzerá na odchádzajúci disk. Je tam SMART?
          • Re: SATA problemy ? 29.05.2007 | 16:49
            GreX   Návštevník
            Ano mam
            • Re: SATA problemy ? 29.05.2007 | 20:47
              WlaSaTy   Návštevník
              no a co pise?

              monitorovaci system ktory nie je aktivovany je zbytocny. teda ako keby nebol.