,takze po 2 mesiacoch uz ma nebavi mat kartu len tak zalozenu a nevyuzivat ju , takze,
kartu mam nadetekovanu spravne , v rc.local , mam zapisanu spravne detekciu
rmmod cx8800 cx88xx tuner
modprobe cx88xx card=5 tuner=38
modprobe cx8800
#modprobe tuner
, jedna sa presne o tuto kartu:
Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: LeadTek Research Inc. Device 6211
Flags: bus master, medium devsel, latency 32, IRQ 17
Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
Kernel modules: cx8800
, moduly by som mal mat spravne zavedene .ale hodim sem vypis ,,,
lsmod | grep cx*
cx8800 31236 0
cx88xx 69800 1 cx8800
lockd 66732 1 nfsd
nfs_acl 4864 1 nfsd
auth_rpcgss 34976 1 nfsd
sunrpc 174688 8 nfsd,lockd,nfs_acl,auth_rpcgss
tuner_xc2028 23600 1 tuner
xc5000 13192 1 tuner
videobuf_dvb 8324 1 cx88xx
dvb_core 81024 1 videobuf_dvb
ppp_generic 25116 0
snd_pcsp 11048 0
shpchp 34068 0
pci_hotplug 28064 1 shpchp
i2c_nforce2 8580 0
parport_pc 37700 1
parport 33004 3 ppdev,lp,parport_pc
processor 41388 1 thermal
ac 6020 0
videodev 34176 4 tuner,cx8800,cx88xx,bttv
v4l1_compat 15364 1 videodev
ir_common 40452 2 cx88xx,bttv
compat_ioctl32 3072 2 cx8800,bttv
i2c_algo_bit 7556 2 cx88xx,bttv
v4l2_common 13184 3 tuner,cx8800,bttv
videobuf_dma_sg 12932 3 cx8800,cx88xx,bttv
videobuf_core 17668 5 cx8800,cx88xx,videobuf_dvb,bttv,videobuf_dma_sg
btcx_risc 6408 3 cx8800,cx88xx,bttv
tveeprom 13956 2 cx88xx,bttv
i2c_core 22804 17 tuner,cx88xx,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,i2c_nforce2,bttv,i2c_algo_bit,v4l2_common,tveeprom
snd_ac97_codec 102308 1 snd_intel8x0
snd_seq_device 8204 3 snd_rawmidi,snd_seq_oss,snd_seq
snd_pcm_oss 40192 0
snd_pcm 70020 5 snd_pcsp,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 21384 3 snd_seq,snd_pcm
snd_page_alloc 10120 2 snd_intel8x0,snd_pcm
snd_mixer_oss 16512 1 snd_pcm_oss
snd 50852 21 snd_pcsp,snd_intel8x0,snd_ac97_codec,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 8160 1 snd
ac97_bus 3584 1 snd_ac97_codec
slhc 7552 1 ppp_generic
forcedeth 56592 0
rtc_cmos 12332 0
rtc_core 17564 1 rtc_cmos
rtc_lib 4480 1 rtc_core
mbcache 8708 1 ext3
ohci_hcd 25360 0
ehci_hcd 36876 0
cdrom 35360 1 sr_mod
usbcore 136848 4 usbhid,ohci_hcd,ehci_hcd
ata_generic 6788 0
libata 158112 2 ata_generic,pata_amd
scsi_mod 102164 4 sg,sd_mod,sr_mod,libata
este
lsmod | grep bttv
bttv 165332 0
videodev 34176 4 tuner,cx8800,cx88xx,bttv
ir_common 40452 2 cx88xx,bttv
compat_ioctl32 3072 2 cx8800,bttv
i2c_algo_bit 7556 2 cx88xx,bttv
v4l2_common 13184 3 tuner,cx8800,bttv
videobuf_dma_sg 12932 3 cx8800,cx88xx,bttv
videobuf_core 17668 5 cx8800,cx88xx,videobuf_dvb,bttv,videobuf_dma_sg
btcx_risc 6408 3 cx8800,cx88xx,bttv
tveeprom 13956 2 cx88xx,bttv
i2c_core 22804 17 tuner,cx88xx,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,i2c_nforce2,bttv,i2c_algo_bit,v4l2_common,tveeprom
- no a problem je ten ze
v kdetv mi ide zvuk ale obraz nie , ( btw. ten zvuk zapinam/vypinam cez "v4lctl volume mute off" resp. "v4lctl volume mute on") ,
v tvtime pise no signal (modra obrazovka) , ak zakomentujem rc.local tak zacne zrnit ale nechce skenovat
v xawtv zrni ale nic viac
...............
nemam sajnu uz , 2x sa mi podarilo ju spojazdnit ,naposledy bola zle detekovana , nasledne myslim ze prisiel upgrade kernelu alebo novy xorg (uz sa nepamatam) a prestala slapat, a teraz uz nemam paru ako dalej ...
ak mate niekto nejaky napad tak budem vdacny ;-)
thX
rc.local som upravil ako radis teda:
rmmod cx8800 cx88xx tunermodprobe cx88xx #card=5 tuner=38
modprobe cx8800
modprobe tuner
, v tomto pripade kartu nedetekovalo ,v kdetv pise Video4Linux2:uknown/generic , dalej tvtime pri spusteni
tvtime-scanner vyhodi
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/lazzio/.tvtime/tvtime.xml
Scanning using TV standard PAL.
/home/lazzio/.tvtime/stationlist.xml: No existing PAL station list "Custom".
videoinput: Can't get tuner info: Neprípustný argument
videoinput: Can't get tuner info: Neprípustný argument
No tuner found on input 0. If you have a tuner, please
select a different input using --input=<num>.
, este pre doplnenie hodim vypis modules.conf
# /etc/modprobe.conf (for v2.6 kernels)options snd_intel8x0 ac97_quirk=0
#disable autoload of ipv6
alias net-pf-10 off
#options card = 5
alias char-major-81-0 CX23880
#options cx88xx #card=5 tuner=38
, tym co si pisal ze nechat autodetekciu si myslel iba zakomentovat tie optiony ? alebo treba nieco dopisat na autodetekciu ? lebo vidis , system nenasiel kartu ...
vdaka
id
find /dev -ls | grep -i vid
mozno len nema pravo kukat telku lebo neni v skupine video.
11933 0 lrwxrwxrwx 1 root root 10 feb 9 20:10 /dev/video0 -> v4l/video011930 0 lrwxrwxrwx 1 root root 10 feb 9 20:10 /dev/video -> v4l/video0
11974 0 crw-rw---- 1 root video feb 9 20:10 /dev/v4l/vbi0
11988 0 lrwxrwxrwx 1 root root 7 feb 9 20:10 /dev/v4l/by-path/pci-0000:01:09.0-video-index1 -> ../vbi0
11937 0 lrwxrwxrwx 1 root root 9 feb 9 20:10 /dev/v4l/by-path/pci-0000:01:09.0-video-index0 -> ../video0
11922 0 crw-rw---- 1 root video feb 9 20:12 /dev/v4l/video0
11799 0 crw-rw-rw- 1 root video feb 9 20:10 /dev/dri/card0
2367 0 crw-rw---- 1 root video feb 9 20:09 /dev/fb/0
11927 0 lrwxrwxrwx 1 root root 13 feb 9 20:10 /dev/char/81:0 -> ../v4l/video0
11986 0 drwxr-xr-x 2 root root 0 feb 9 20:10 /dev/.udev/names/v4l\\x2fby-path\\x2fpci-0000:01:09.0-video-index1
11987 0 -rw-r--r-- 1 root root 0 feb 9 20:10 /dev/.udev/names/v4l\\x2fby-path\\x2fpci-0000:01:09.0-video-index1/\\x2fclass\\x2fvideo4linux\\x2fvbi0
11984 0 -rw-r--r-- 1 root root 0 feb 9 20:10 /dev/.udev/names/vbi0/\\x2fclass\\x2fvideo4linux\\x2fvbi0
11981 0 -rw-r--r-- 1 root root 0 feb 9 20:10 /dev/.udev/names/vbi/\\x2fclass\\x2fvideo4linux\\x2fvbi0
11978 0 -rw-r--r-- 1 root root 0 feb 9 20:10 /dev/.udev/names/char\\x2f81:1/\\x2fclass\\x2fvideo4linux\\x2fvbi0
11976 0 -rw-r--r-- 1 root root 0 feb 9 20:10 /dev/.udev/names/v4l\\x2fvbi0/\\x2fclass\\x2fvideo4linux\\x2fvbi0
11934 0 drwxr-xr-x 2 root root 0 feb 9 20:10 /dev/.udev/names/v4l\\x2fby-path\\x2fpci-0000:01:09.0-video-index0
11935 0 -rw-r--r-- 1 root root 0 feb 9 20:10 /dev/.udev/names/v4l\\x2fby-path\\x2fpci-0000:01:09.0-video-index0/\\x2fclass\\x2fvideo4linux\\x2fvideo0
11931 0 drwxr-xr-x 2 root root 0 feb 9 20:10 /dev/.udev/names/video0
11932 0 -rw-r--r-- 1 root root 0 feb 9 20:10 /dev/.udev/names/video0/\\x2fclass\\x2fvideo4linux\\x2fvideo0
11928 0 drwxr-xr-x 2 root root 0 feb 9 20:10 /dev/.udev/names/video
11929 0 -rw-r--r-- 1 root root 0 feb 9 20:10 /dev/.udev/names/video/\\x2fclass\\x2fvideo4linux\\x2fvideo0
11926 0 -rw-r--r-- 1 root root 0 feb 9 20:10 /dev/.udev/names/char\\x2f81:0/\\x2fclass\\x2fvideo4linux\\x2fvideo0
11923 0 drwxr-xr-x 2 root root 0 feb 9 20:10 /dev/.udev/names/v4l\\x2fvideo0
11924 0 -rw-r--r-- 1 root root 0 feb 9 20:10 /dev/.udev/names/v4l\\x2fvideo0/\\x2fclass\\x2fvideo4linux\\x2fvideo0
11973 4 -rw-r--r-- 1 root root 107 feb 9 20:10 /dev/.udev/db/\\x2fclass\\x2fvideo4linux\\x2fvbi0
11920 4 -rw-r--r-- 1 root root 113 feb 9 20:10 /dev/.udev/db/\\x2fclass\\x2fvideo4linux\\x2fvideo0
4768 0 crw------- 1 root video feb 9 20:09 /dev/misc/agpgart
groups
disk wheel video audio optical storage camera power users vlock lazziovdaka
options cx8800 card=5 tuner=38a do rc.conf pridaj do MODULES=(cx8800)
on si tie ostatne moduly potom nahra automaticky, z rc.local potom mozes vymazat tie moduly
#rmmod cx8800 cx88xx tuner#modprobe cx88xx card=0 tuner=0
#modprobe cx8800
#modprobe tuner
rc.conf:
MODULES=(forcedeth slhc ac97_bus snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-seq snd-page-alloc snd-pcm snd-rawmidi snd-timer snd snd-mpu401-uart snd-mpu401 snd-ac97-codec snd-intel8x0 soundcore fuse cx8800 tun)modprobe.conf:
options snd_intel8x0 ac97_quirk=0#disable autoload of ipv6
alias net-pf-10 off
#options card = 5
alias char-major-81-0 CX23880
options cx8800 card=5 tuner=38
, ked to je takto :
, kdetv pise: No device found ,
, tvtime-scanner:
Reading configuration from /etc/tvtime/tvtime.xmlReading configuration from /home/lazzio/.tvtime/tvtime.xml
Scanning using TV standard PAL.
/home/lazzio/.tvtime/stationlist.xml: No existing PAL station list "Custom".
videoinput: Cannot open capture device /dev/video0: Adresár alebo súbor neexistuje
, hrabal som sa aj v logoch , a co sa tyka karty tak som nasiel iba toto ( pri takto upravenych conf.):
cx8800: Unknown parameter `card'-skusal som asi uz vsetky mozne kombinacie ale netusim kde je problem,
mas este nejaku fintu v rukave ?:-)
Reading configuration from /etc/tvtime/tvtime.xmlReading configuration from /home/lazzio/.tvtime/tvtime.xml
Scanning using TV standard PAL.
/home/lazzio/.tvtime/stationlist.xml: No existing PAL station list "Custom".
Scanning from 44,00 MHz to 958,00 MHz.
Found a channel at 47,50 MHz (46,00 - 49,00 MHz), adding to channel list.
Found a channel at 64,00 MHz (63,50 - 64,25 MHz), adding to channel list.
Found a channel at 126,50 MHz (125,00 - 128,00 MHz), adding to channel list.
Found a channel at 139,50 MHz (138,00 - 141,00 MHz), adding to channel list.
Found a channel at 147,25 MHz (146,25 - 148,00 MHz), adding to channel list.
Found a channel at 160,50 MHz (159,00 - 162,00 MHz), adding to channel list.
Found a channel at 182,50 MHz (181,00 - 184,00 MHz), adding to channel list.
Found a channel at 198,50 MHz (197,00 - 200,00 MHz), adding to channel list.
Found a channel at 209,50 MHz (208,00 - 211,00 MHz), adding to channel list.
Found a channel at 223,50 MHz (222,00 - 224,75 MHz), adding to channel list.
Found a channel at 229,50 MHz (228,75 - 230,25 MHz), adding to channel list.
Found a channel at 237,50 MHz (236,00 - 239,00 MHz), adding to channel list.
Found a channel at 244,50 MHz (243,00 - 246,00 MHz), adding to channel list.
Found a channel at 252,00 MHz (251,00 - 253,00 MHz), adding to channel list.
Found a channel at 259,25 MHz (258,25 - 260,00 MHz), adding to channel list.
Found a channel at 265,50 MHz (264,00 - 267,00 MHz), adding to channel list.
Found a channel at 273,00 MHz (272,00 - 274,00 MHz), adding to channel list.
Found a channel at 279,50 MHz (278,00 - 281,00 MHz), adding to channel list.
Found a channel at 286,75 MHz (285,50 - 288,00 MHz), adding to channel list.
Found a channel at 293,50 MHz (292,00 - 295,00 MHz), adding to channel list.
Found a channel at 302,50 MHz (301,00 - 304,00 MHz), adding to channel list.
Found a channel at 310,50 MHz (309,00 - 312,00 MHz), adding to channel list.
Found a channel at 318,75 MHz (317,50 - 320,00 MHz), adding to channel list.
Found a channel at 326,50 MHz (325,00 - 328,00 MHz), adding to channel list.
Found a channel at 335,00 MHz (334,00 - 336,00 MHz), adding to channel list.
Found a channel at 342,50 MHz (341,00 - 344,00 MHz), adding to channel list.
,ked to dokoncilo, po opatovnom spusteni aj tak blue screen a no signal .... (kdetv ide....
unable to grab video
Video display is not possible with the current configuration.Try playing with the configuration options of the V4L2 plugin. ,,cize skusam kombinovat ,raz ide raz sekne ,,ale vyzera ze to pojde .
dakujem ujo :-)
modprobe.conf:
options snd_intel8x0 ac97_quirk=0#disable autoload of ipv6
alias net-pf-10 off
#options card=5
alias char-major-81-0 CX23880
options cx88xx card=5 tuner=38
neviem naco sluzia ostane riadky ako alias char-major-81-0 CX23880 a tiez alias net-pf-10 off
rc.conf:
MODULES=(forcedeth slhc ac97_bus snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-seq snd-page-alloc snd-pcm snd-rawmidi snd-timer snd snd-mpu401-uart snd-mpu401 snd-ac97-codec snd-intel8x0 soundcore fuse cx88xx tun)rc.local:
#rmmod cx8800 cx88xx tunermodprobe cx88xx card=5 tuner=38
modprobe cx88xx
modprobe tuner
, takze tak . dikes za pomoc,, uvidime ako dlho to pojde :-)
P.S. , ked som mal v modprobe.conf cx8xx a v rc.conf cx8800 , alebo naopak , (uz nepamatam) tak pri bootovani , kde kontrolovalo moduly vyhodilo hlasku :
FATAL: Error inserting cx8800 (/lib/modules/2.6.28-ARCH/kernel/driver/media/video/cx88/cx8800.ko); Unknown symbol in module , or unknown parameter(see dmesg)btw v modprobe.conf by ti malo stacit
options cx88xx card=5 tuner=38a v rc.conf v MODULES cx88xx a ostatne moduly by ti mal udev automaticky natiahnut, no pokial nepouzivas autoloadovanie modulou udevom tak tam okrem cx88xx musis napratat aj cx8800 a tuner
este otazka , ak som spravne pochopil ,ked chcem urobit nejaku zmenu v tvtime napr normu obrazu ,zvuku atd, tak to zmenim v menu a potom znova preskenovat ?
-tie moduly som pridal ale ziadna zmena, podla mna ich loaduje automaticky ,,teda myslim si, da sa to nejako zistit ?
dik :-)