Broadcom Driver
Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
V synapticu som si nainstaloval podla navodov na internete tieto balicky:
bcmwl-kernel-source
broadcom-sta-common
broadcom-sta-source
firmware-b43-installer
b43-fwcutter
Potom som nahodil modul pomocou
modprobe brcmsmac
Na wifi ma pripojilo. Lenze po 1 min . ma odpojilo a rychlost ta je o nicom. Prosim pomôzte ako to mam rozbehat uz som zufalý po 5 dnoch hladania na nete.
Pre pridávanie komentárov sa musíte prihlásiť.
ak to rozbalis, prejdi v konzole do toho adresara
nasledne zadaj:
./scripts/driver-select alx
potom
make
ked to skonci
sudo make install
a ked to uplne dokonci,
sudo modprobe alx
pisem ti z toho isteho notasu ...
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 10)
skus to este raz akurat ked tam vojdes daj make clean
a az potom chod cez ./scripts/driver-select ath9k
pripadne pastni vypis celeho, ako si to kompiloval.
make[1]: Entering directory `/usr/src/linux-headers-3.5.0-18-generic'
CLEAN /home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc
CLEAN /home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc/.tmp_versions
make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-18-generic'
root@mito-Lenovo-G580:~/programy/wifi/compat-wireless-3.5.1-1-snpc# ./scripts/driver-select ath9k
Processing new driver-select request...
Backup exists: Makefile.bk
Backup exists: Makefile.bk
Backup exists: Makefile.bk
Backup exists: Makefile.bk
Backup exists: Makefile.bk
Backup exists: drivers/net/wireless/Makefile.bk
Backup exists: drivers/net/wireless/ath/Makefile.bk
Backup exists: net/wireless/Makefile.bk
Backup exists: drivers/ssb/Makefile.bk
Backup exists: drivers/bcma/Makefile.bk
Backup exists: drivers/misc/eeprom/Makefile.bk
Backup exists: Makefile.bk
root@mito-Lenovo-G580:~/programy/wifi/compat-wireless-3.5.1-1-snpc# make
./scripts/gen-compat-autoconf.sh /home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc/.config /home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc/config.mk > include/linux/compat_autoconf.h
make -C /lib/modules/3.5.0-18-generic/build M=/home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc modules
make[1]: Entering directory `/usr/src/linux-headers-3.5.0-18-generic'
CC [M] /home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc/compat/main.o
LD [M] /home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc/compat/compat.o
Building modules, stage 2.
MODPOST 1 modules
CC /home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc/compat/compat.mod.o
LD [M] /home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc/compat/compat.ko
make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-18-generic'
root@mito-Lenovo-G580:~/programy/wifi/compat-wireless-3.5.1-1-snpc# make install
make -C /lib/modules/3.5.0-18-generic/build M=/home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc modules
make[1]: Entering directory `/usr/src/linux-headers-3.5.0-18-generic'
Building modules, stage 2.
MODPOST 1 modules
make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-18-generic'
make -C /lib/modules/3.5.0-18-generic/build M=/home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc "INSTALL_MOD_DIR=updates" \
modules_install
make[1]: Entering directory `/usr/src/linux-headers-3.5.0-18-generic'
INSTALL /home/mito/programy/wifi/compat-wireless-3.5.1-1-snpc/compat/compat.ko
DEPMOD 3.5.0-18-generic
make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-18-generic'
depmod will prefer updates/ over kernel/ -- OK!
Now run:
sudo make unload to unload all: wireless, bluetooth and ethernet modules
sudo make wlunload to unload wireless modules
sudo make btunload to unload bluetooth modules
Run sudo modprobe driver-name to load your desired driver.
If unsure reboot.
root@mito-Lenovo-G580:~/programy/wifi/compat-wireless-3.5.1-1-snpc# wlunload && sudo modprobe ath9k
wlunload: command not found
Návod ako to spraviť žeby to šľapalo tak ako má som napísal tu :
http://forum.ubuntu.cz/index.php?topic=66134.0
Čo keby si napísal do terminálu toto a dal sem odpovedˇ.
cat /etc/*release
Možno sa dozvieš niečo nové.
cat /etc/*release
"DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS"
NAME="Ubuntu"
VERSION="12.04.1 LTS, Precise Pangolin"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu precise (12.04.1 LTS)"
VERSION_ID="12.04
Lebo tu vidno headers pre jadro 3.5.0-18 Entering directory `/usr/src/linux-headers-3.5.0-18-generic'
Ale dobre, ze si vytrvalý gratulujem ...