Zdravím, dnes som si nainštaloval Kali a zistil som že mi nefunguje mikrofón. Jedná sa o USB mikrofón. Hľadal som po internete ale žiaľ neúspešne. Slúchadlá mi fungujú len ten mikrofón nie. Detekovalo ho ale keď chcem skúsiť mikrofón (napr. na discorde) tak vôbec nefunguje. Prosím o radu.
Nefunguje mi USB mikrofón
Billyxd_
Pre pridávanie komentárov sa musíte prihlásiť.
Čo ti vypíše lsblk?
Z terminálu sa kopíruje Ctrl+Shift+C, sem to vložíš Ctrl+V klikneš na "vložiť text alebo zdrojová kód"
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk ├─sda1 8:1 0 464.8G 0 part / ├─sda2 8:2 0 1K 0 part └─sda5 8:5 0 975M 0 part [SWAP] sr0 11:0 1 1024M 0 rom
Toto mi vyšlo z terminálu.
Kuaaa to malo byť lsusb
PS: Pridávaj výstupy medzi značky PRE aby som to po tebe nemusel upravovať.
Už to ide. Našiel som fix na nete, a daj mi tvoj discord prosím nech to rýchlejšie poriešime :)
3 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 1030
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 1 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 2
linked by: 2
configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 0
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel MID"
alsa.long_card_name = "HDA Intel MID at 0xd5200000 irq 32"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3b56"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 1
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 9039
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 52057 / 79% / -6.00 dB
volume steps: 65537
muted: yes
current latency: 0.14 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CX20585 Analog"
alsa.id = "CX20585 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel MID"
alsa.long_card_name = "HDA Intel MID at 0xd5200000 irq 32"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3b56"
device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
active port: <analog-input-internal-mic>
* index: 2
name: <alsa_input.usb-Solid_State_System_Co._Ltd._LCS_USB_Audio_000000000000-00.mono-fallback>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause: (none)
priority: 9040
volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 19944 / 30% / -31.00 dB
volume steps: 65537
muted: no
current latency: 158915.71 ms
max rewind: 0 KiB
sample spec: s24le 1ch 44100Hz
channel map: mono
Mono
used by: 2
linked by: 2
configured latency: 30.00 ms; range is 0.50 .. 2000.00 ms
card: 2 <alsa_card.usb-Solid_State_System_Co._Ltd._LCS_USB_Audio_000000000000-00>
module: 8
properties:
alsa.resolution_bits = "24"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "LCS USB Audio"
alsa.long_card_name = "Solid State System Co.,Ltd. LCS USB Audio at usb-0000:00:1d.0-1.3, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.0-usb-0:1.3:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/sound/card2"
udev.id = "usb-Solid_State_System_Co._Ltd._LCS_USB_Audio_000000000000-00"
device.bus = "usb"
device.vendor.id = "0c76"
device.vendor.name = "JMTek, LLC."
device.product.id = "2018"
device.product.name = "LCS USB Audio"
device.serial = "Solid_State_System_Co._Ltd._LCS_USB_Audio_000000000000"
device.string = "hw:2"
device.buffering.buffer_size = "264600"
device.buffering.fragment_size = "132300"
device.access_mode = "mmap+timer"
device.profile.name = "mono-fallback"
device.profile.description = "Mono"
device.description = "LCS USB Audio Mono"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
active port: <analog-input-mic>
ked si nasiel fix a ide to, daj vediet co to bolo a ako si to vyriesil pre buduce generacie
ale byt tebou kali by som aj tak vymenil, kali je nastroj na testovanie a nie zrovna idealne distro na denodenne pouzivanie
navyse nastroje ktore su v kali si vies nahodit do vacsiny distribucii (niekto dokonca maju metabalik kali-tools)
Ja som našiel fix nie na mic ale na to že mi ten daemon padal. ale mikrofón od slúchadiel mi ide avǎk ten USB stále nie. takže stále hľadám riešenie
No PulseAudio daemon running, or not running as session daemon.
Napísalo mi to toto.
To je divné, načo ti je také distro kde spadne aj zvukový démon?
Skus ho pre istotu naisto ukončiť
a znovu spustiť
PS: To distro je úplná blbosť, najdi si niečo lepšie.
Zrobil som jak si povedal ale úplne to isté.
Čo by si teda odporúčal? Namiesto Kali
Skús https://mxlinux.org/ s XFCE, kým nedokončím svoje :-)
otvor si distrowatch a z toho zoznamu napravo si vyber nieco z prvej 10tky (alebo 20tky)
ja by som odporucil MX linux s KDE (sam ho pouzivam na starsom ntb) alebo klasiku ubuntu/mint/popOS
manjaro je mone oblubene ale vyzaduje trosku viac znalosti na dennodenne pouzivanie
alebo si ich vyskusaj na distrotest.net
Stiahol som si PureOS a taktiež Ubuntu. Nikde mi nefunguje mikrofón čo je divné lebo keď som ešte predvčerom mal windows tak mikrofón fungoval bez problémov. netreba stiahnuť nejaký driver? Jedná sa o tento mikrofón.
Taktiež som niekde čítal že to je s poradim mikrofónov. Vôbec neviem ako ich mám popresúvať alebo niečo
Neviem ako je to v kali ale byva to v nastaveni zvuku, karta vstup alebo hardver, polozka konektor. Tam rolovacie menu zo zoznamom pripojenych mikrofonov. Ak sa ten tvoj mikrofon tvari ako USB zvukovka tak ju najprv vyber na tej karte hardver. Pripadne sa s tym trochu pohraj. Moze to byt rozna kombinacia nastaveni.