Ako na update Slackware?

Sekcia: Aplikácie & Desktop 25.01.2006 | 16:58
Tomáš Hanzel   Návštevník
Ahoj, chcem sa opýtať ako sa updatuje Slackware? Dakujem
    • Re: Ako na update Slackware? 25.01.2006 | 14:07
      Avatar borg Arch, Debian jessie  Administrátor
      ja som pouzival swaret.
    • Re: Ako na update Slackware? 25.01.2006 | 14:24
      Stefan Lukacovic   Návštevník
      Precitaj si UPGRADE.TXT v hlavnom adresari instalacneho CD Slackware.
      • Re: Re: Ako na update Slackware? 25.01.2006 | 14:41
        do   Návštevník
        Stiahol som si swaret ale má príponu tgz.tar ked dám installpkg swaret.noarch.....tgz.tar Cannot install swaret-1.6.2-noarch-1.tgz: package does not end in .tgz Ked som pozrem na stránku píše sa tam že prepíšte tgz.tar na tgz...tak som spravil swaret-1.6......tgz a píše mi že nieje správny formát...
        • Re: Re: Re: Ako na update Slackware? 25.01.2006 | 14:44
          d   Návštevník
          už som to vyriešil Teraz ale neviem ani podla príkladu ako na to... Prosím prídkladne o vysvetlenie
          • Re: Re: Re: Re: Ako na update Slackware? 25.01.2006 | 15:00
            Avatar borg Arch, Debian jessie  Administrátor
            v /etc/swaret.conf: VERSION=verzia na ktoru chces upgradovat, ja som pouzival CURRENT a uz len potom zadat prikazy: swaret --update swaret --upgrade swaret --purge
            • Re: Re: Re: Re: Re: Ako na update Slackware? 25.01.2006 | 15:07
              d   Návštevník
              Predpokladám v konzole.... Napísal som v etc/swaret.conf som to napísal potom swaret --update a vypísalo mi len verziu swaret-u takto: oot@linux:~# swaret --update swaret 1.6.3-2 root@linux:~# swaret --upgrade swaret 1.6.3-2 root@linux:~# swaret --purge swaret 1.6.3-2 Další návrh?
              • Re: Re: Re: Re: Re: Re: Ako na update Slackware? 25.01.2006 | 15:37
                Avatar borg Arch, Debian jessie  Administrátor
                aku mas verziu slacka? co si napisal do premmenej VERSION v /etc/swaret.conf?
                • Re: Re: Re: Re: Re: Re: Re: Ako na update Slackwar 25.01.2006 | 15:48
                  d   Návštevník
                  popravde mám napísané na CD 10.1 Ale nezdá sa mi...to Napísal som tam to Current.
                  • Re: Re: Re: Re: Re: Re: Re: Re: Ako na update Slac 25.01.2006 | 16:12
                    Avatar borg Arch, Debian jessie  Administrátor
                    tak ak mas 10.1 daj VERSION na 10.2 (VERSION=10.2) a takisto si pozri ci nemas nahodou zakomentovane zdroje. a rob to pod rootom, ak si to nahodou nerobil...
                    • Re: Re: Re: Re: Re: Re: Re: Re: Re: Ako na update 25.01.2006 | 16:15
                      puco   Návštevník
                      Ak by nebol root, tak by mu to vypisalo. Mohli by ste vystavit ten vas swaret.conf. Ak chcete vediet aku mate verziu Slacka, tak v tomto subore je to napisane, ak ste to nevymazali /etc/slackware-version
                      • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Ako na upd 25.01.2006 | 16:22
                        Tomáš Hanzel   Návštevník
                        cat /etc/swaret.conf.new ########################################################### # # swaret.conf, Version: 1.6.3 # ### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ### # # Define a valid Slackware Linux Version. # (Used for Dependency Support and other Features) # # NOTE: If you want to use Slackware Linux Current, # set VERSION to 'current' (VERSION=current). # VERSION=CURRENT # # Define the language for status and error messages LANGUAGE=ENGLISH # # ---------------------------------------------------------- # Define Slackware (8.1 or Higher or Current) Linux Mirrors. # (Used for Official Slackware Linux Packages) # (Slackware Linux Mirrors available at http://www.slackware.com) # # Syntax: ROOT=PROTOCOL:URL # # NOTE: swaret will use the order of the specified ROOT URL's. # #ROOT=file:/mnt/cdrom #ROOT=file:/mnt/dvdrom #ROOT=file:/mnt/usbmemstick ROOT=ftp://ftp.nluug.nl/pub/os/Linux/distr/slackware/slackware-$VERSION ROOT=http://sunsite.cnlab-switch.ch/ftp/mirror/slackware/slackware-$VERSION ROOT=ftp://ftp.slackware.no/pub/linux/slackware/slackware-$VERSION ROOT=http://www.slackware.no/slackware/slackware-$VERSION ROOT=ftp://ftp.slackware.at/slackware-$VERSION ROOT=http://www.slackware.at/data/slackware-$VERSION ROOT=ftp://ftp.planetmirror.com/pub/slackware/slackware-$VERSION ROOT=http://ftp.planetmirror.com/pub/slackware/slackware-$VERSION #ROOT=rsync://rsync.slackware.no/slackware/slackware-$VERSION #ROOT=rsync://rsync.slackware.at/slackware/slackware-$VERSION #ROOT=file:/pub/slackware #ROOT=file:/mnt/nfsshare/slackware #ROOT=file:/mnt/sambashare/slackware # # ----------------------------------------------------------- # Define Repository URL's with Slackware Linux Packages. # (Used for Repository Slackware Linux Packages) # (Repository URL's available at http://swaret.sourceforge.net and # at http://www.linuxpackages.net/mirrors.php) # # NOTE 1: To use a Local Repository or Remote Repository, # be sure it contains the following Files: # - CHECKSUMS.md5 (For MD5 Sum, REQUIRED) # - FILELIST.TXT (For Package Name + Size, REQUIRED) # - PACKAGES.TXT (For Package Description, NOT REQUIRED) # - MANIFEST.bz2 (For Dependency Support, NOT REQUIRED) # NOTE 2: To create your own Repository, use 'swaret-tools'. # You can get 'swaret-tools' at http://swaret.sourceforge.net! # # Syntax: REPOS_ROOT=REPOSITORYNAME%PROTOCOL:URL # # NOTE 1: The REPOSITORY NAME can only be ONE Keyword! # NOTE 2: swaret will use the order of the specified REPOS_ROOT URL's. # #REPOS_ROOT=LinuxPackagesDOTNET%http://www2.linuxpackages.net/packages/Slackware-10.0 # #REPOS_ROOT=My_Slackware_Packages_On_CD-ROM%file:/mnt/cdrom #REPOS_ROOT=My_Slackware_Packages_On_DVD-ROM%file:/mnt/dvdrom #REPOS_ROOT=My_Slackware_Packages_On_USB_Memory_Stick%file:/mnt/usbmemstick #REPOS_ROOT=SomeRemoteRepository%ftp://ftp.someremoterepository.net/slackware/slackware-10.0 #REPOS_ROOT=SomeRemoteRepository%http://www.someremoterepository.net/slackware/slackware-10.0 #REPOS_ROOT=SomeRemoteRepository%rsync://rsync.someremoterepository.net/slackware/slackware-10.0 # # ------------------------------------------------------------ # Define Libraries (8.1 or Higher or Current) List Mirrors. # (Used for Dependency Support) # # NOTE 1: You need to specify a Libraries List Mirror which # contains a 'libraries-VERSION' File. # # NOTE 2: To create the Libraries List, use 'swaret-tools'. # You can get 'swaret-tools' at http://swaret.sourceforge.net! # You can also clear all DEP_ROOT Variable(s) which will # allow swaret to create the Libraries List for you # during Dependency Check using the defined ROOT Variable(s) above. # # Syntax: DEP_ROOT=PROTOCOL:URL # # NOTE: swaret will use the order of the specified DEP_ROOT URL's. # DEP_ROOT=http://swaret.sourceforge.net #DEP_ROOT=file:/mnt/cdrom #DEP_ROOT=file:/mnt/dvdrom #DEP_ROOT=file:/mnt/usbmemstick #DEP_ROOT=file:/pub/swaret #DEP_ROOT=file:/mnt/nfsshare/swaret #DEP_ROOT=file:/mnt/sambashare/swaret # # ---------------------------------------------------------- # General Settings # # Do you want swaret to use Random Slackware Linux Mirrors? # -> 1 for yes, 0 for no. # RANDOMR=0 # # Do you want swaret to back-up your packages when upgradeing? # -> If set to 1, old packages are backed up in $CACH_DIR/rollback. # Normally this is /var/swaret/rollback. ROLLBACKMAX is the number # of "upgrades" that will be backed up before old backups will be # removed. Turning on rollback means upgrading packages takes # longer, but it is more safe. # -> If set to 0, swaret will not back up packages. # ROLLBACK=0 ROLLBACKMAX=3 # # Do you want swaret to parse all the Package Descriptions? # -> If set to 1, swaret will also match Packages whose Description # is matching the Keyword(s) you specify after --ACTION. # NOTE: swaret will parse all the Package Descriptions for this, # and might slow down swaret when using an older System. # -> If set to 0, swaret will not use Package Descriptions # to match one or more Packages. # USEPKGDESC=0 # # If you don't want swaret to Upgrade, Install, Re-Install, Download,... # some Packages, add the KEYWORDS to the EXCLUDE Variable. # To disable Exclude Method: swaret --exclude -off # To enable Exclude Method: swaret --exclude -on # # NOTE: You can add ANY EXTENDED REGEXP (Regular Expression) to the EXCLUDE Variable(s) # # Basic Exclude EXCLUDE=kernel alsa lilo EXCLUDE=swaret EXCLUDE=aaa_ EXCLUDE=aaa_ glib alsa EXCLUDE=MANIFEST.bz2$ EXCLUDE=.*dl$ .*PACKAGER$ .*MYBUILD$ # # Advanced Exclude # Syntax: KEYWORD[DONT_EXCLUDE_ME_KEYWORD1,DONT_EXCLUDE_ME_KEYWORD2,...] # Example: kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB] # #EXCLUDE=kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB] # # Do you want to enable Dependency Check? # -> If set to 1, swaret will start the Dependency Check after # every Upgrade, Install and Re-Install Procedure. # -> If set to 0, swaret will not start the Dependency Check # after any Procedure. # DEPENDENCY=1 # # Do you want swaret to Search for missing Libraries (and Fix) # which could be found on your System, but not tracked by ldconfig? # -> 1 for yes, 0 for no. # DSEARCHLIB=1 # # Set to 1, if you want swaret to use the 'slocate' program # to Search for missing Libraries. # (be sure to issue the 'updatedb' Command regularly!) # If DSEARCHM is set to 0, swaret will use # the 'find' program to locate missing Libraries. # -> 1 for yes, 0 for no. # DSEARCHM=0 # # Start MD5 Check after Fetching Packages, Patches and Sources? # -> 1 for yes, 0 for no. # MD5CHECK=1 # # Start GPG Signature Check after Fetching Packages, Patches and Sources? # # NOTE: Check out F.A.Q. (--faq gpg) how to Import a Public GPG Key which # will be used by the GPG Signature Check. # # -> 1 for yes, 0 for no. # GPGCHECK=0 # # Show Description for Packages during # Upgrade, Install, Re-Install,... Procedures? # -> If set to 0, you will not see a Description. # -> If set to 1, you will see a Description. # DESC=0 # # Cache Directory for (Repository) Packages and Sources. # CACHE_DIR=/var/swaret # # Enable Logging? # -> 1 for yes, 0 for no. # LOG=1 # # swaret Log File # LOG_FILE=/var/log/swaret # # Show Warnings? # -> 1 for yes, 0 for no. # WARNINGS=1 # # Show Information? # -> 1 for yes, 0 for no. # INFORMATION=1 # # ------------------------------------------------------------- # Network Settings # # Network Interface # Use this if you have a Network Interface. # NIC=eth0 # # Local Interface # Use this if you do not have a Network Interface. # # For Example (CD-ROM): # You got a Slackware Linux CD-ROM, # mount the CD-ROM to /mnt/cdrom and # set ROOT to 'file:/mnt/cdrom' in /etc/swaret.conf. # Also, set NIC to 'lo' (Local Loop Device). # # NIC=lo # # Progress # If set to 0, swaret will use the '%' Download Interface. # If set to 1, swaret will use the 'size' Download Interface. # If set to 2, swaret will use the 'wget/rsync' Download Interface. # PROGRESS=0 # # Timeout for wget and/or rsync. # -> Number of seconds for Timeout # TIMEOUT=35 # # Retries for wget and/or rsync. # -> Number of Retries # RETRIES=5 # # Behind a Firewall? Using FTP Mirrors? # -> 1 for yes, 0 for no # PASSIVE_FTP=1 # # If you want HTTP or FTP Proxy Support, # uncomment and Setup the following Variable: # # WGET_PROXY=http://IP or HOST:PORT # # If you want RSYNC Proxy Support, # uncomment and Setup the following Variable: # # RSYNC_PROXY=IP or HOST:PORT # ### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ### Mám verziu 10.2 - hmm....to je asi problém...nie?
                        • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Ako na 25.01.2006 | 16:27
                          Avatar borg Arch, Debian jessie  Administrátor
                          skus miesto CURRENT dat current, teda malimi pismenami, asi to je case-sensitive
                        • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Ako na 25.01.2006 | 16:28
                          puco   Návštevník
                          # NOTE: If you want to use Slackware Linux Current, # set VERSION to 'current' (VERSION=current). # VERSION=CURRENT prvy dovod preco vam to nejde je, ze to tam mate napisane velkymi pismenami. Zmente to a mozno sa posunieme dalej. Ale aj ked to zmenite, malo by to vypisovat, ze sa mu nepodarili stiahnut urcite subory. Nemate nahodou presmerovani chybovy vystup niekam do suboru alebo nieco take?
                          • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Ak 25.01.2006 | 16:43
                            Tomáš Hanzel   Návštevník
                            Nie presmeroaný nieje... Zmenil som to malými písmenami skúsil som znovu a píše stále len verziu swaret 2.... Ešte ako teraz som si všimol, že ten konfiguračný súbor sa volá /etc/swaret.conf.new
                            • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re 25.01.2006 | 16:44
                              Avatar borg Arch, Debian jessie  Administrátor
                              tak ho premenuj na /etc/swaret.conf :)
                            • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re 25.01.2006 | 16:49
                              puco   Návštevník
                              A prebehla ta instalacia koreknte. Lebo len tak mimochodom, taka verzia aku hlasi vam este nie je vydana. Sksute odtialto este raz stiahnut swaret http://swaret.sourceforge.net/modules.php?op=modload&name=Downloads&file=index&req=viewdownload&cid=1. Najskor odinstalujte ten co tam mate a potom nanovo nainstalujte tento. Postup napr. z FAQ swaret nstallpkg swaret --set VERSION= swaret --update swaret --upgrade
                              • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re 25.01.2006 | 16:51
                                Tomáš Hanzel   Návštevník
                                no pohol som sa dalej - You need 'bc' in order to use swaret! 'bc' can be found in the Slackware Packages Directory: slackware/ap!
                                • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re 25.01.2006 | 16:55
                                  TH   Návštevník
                                  Takže som to už rozbehal... Teraz už len poradiť čo mám spraviť. Ked zadám swaret -update vypýše mi nejaké ponuky. Ale čo urobiť pre update? myslím tým ponuky ako -- manual --install --upgrade (keyword) -a atď
                                  • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re 25.01.2006 | 16:57
                                    puco   Návštevník
                                    zase stupidna chyba, maju tam byt 2 pomlycky. #swaret --update && swaret --upgrade vam updatne system
                                • Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re 25.01.2006 | 16:56
                                  puco   Návštevník
                                  Ako ste zbadali, tak preco to neslo boli veci, ktore ste si mohli najst aj sam v FAQ. Odpoved na vas dalsi problem je v FAQ http://swaret.sourceforge.net/modules.php?op=modload&name=FAQ&file=index&myfaq=yes&id_cat=2#6 Forum by sa malo vyuzivat az potom, ake ste si precitali manualy a nevie s tym pohnut alebo chcete vediet niekoho ineho nazor. Verim ze pomocou FAQ to uz v pohode rozbehate a budete mat dobry pocit ze aspom nieco ste spravili sam a nabuduce pojdete na to inak
    • Re: Ako na update Slackware? 25.01.2006 | 16:58
      slackw   Návštevník
      czlug.cz tak tady nejdes dost manualu v cestine i slovenstine , napr: how-to-use-swaret , SlakBook atd.