mandriva 2007 spring a 3D

Sekcia: Aplikácie & Desktop 04.07.2007 | 11:37
gofree   Návštevník
Bry den. Mam nainstalovanu mandrivu spring.Co mi ale robi problem ak chcem rozbehat compiz alebbo beryl strati sa mi lista s tlacitkami na minimalizovanie,maximalizovanie a zatvorenie okna. neviete co bzz to mohlo byt. taktiez obnovovacia frekvencia je iba 50Hz. PC athlon XP 2500+,grafika GF 5200. mate nejaky napad
    • Re: mandriva 2007 spring a 3D 04.07.2007 | 12:02
      Avatar Branislav Poldauf Ubuntu LTS, Debian stable  Používateľ
      mne to robilo tiez ale iba vtedy ked som dal automaticky nakofigurovat xorg.conf prikazom

      sudo dpkg-reconfigure -phigh xserver-xorg (je napisany v samotnom xorgu)

      potom ked som pri novej instalacii (musel som pre ine) nastavil rozlisenie, ovladac grafiky aj twinview rucne tak sa to nestalo

      pouzivam ale ubuntu a som lama takze neporadim viac skus zmenit xorg.conf, ale pretym si ho radsej zalohuj

      a men dokonca po tom prikaze zmenilo rozlozenie klavesnice na anglicku, najprv som to povazoval za super vec ze to spravi po 3 klikoch samo ale je to na nic
      Linux: the operating system with a CLUE... Command Line User Environment
    • Re: mandriva 2007 spring a 3D 04.07.2007 | 12:03
      Avatar Branislav Poldauf Ubuntu LTS, Debian stable  Používateľ
      este by som doplnil ale to si asi spravil nainstaluj nove/ine ovladace od nvidie
      Linux: the operating system with a CLUE... Command Line User Environment
    • Re: mandriva 2007 spring a 3D 04.07.2007 | 19:26
      Avatar kuko Ubuntu 7.04  Používateľ
      mne sa to deje ties a mam ati radeon x700, cpu 3.2Ghz intel a zmizne mi aj plocha niekedy a aj dolna lista a aj tie tlacitka s minimalizovanim, maximalizovanim a zavretim , ked vypnem XGL tak to ide normal co je s tym pls poradte som lama cize tak jednoduchsie popiste co by som mal spravit
      ICQ: 350668302 Jabber: Lukas@jabbim.sk
    • Re: mandriva 2007 spring a 3D 04.07.2007 | 19:34
      ubu   Návštevník
      nepomoze vam toto?
      • Re: mandriva 2007 spring a 3D 04.07.2007 | 22:43
        Avatar kuko Ubuntu 7.04  Používateľ
        ja som lama neviem co s tym ??
        ICQ: 350668302 Jabber: Lukas@jabbim.sk
        • Re: mandriva 2007 spring a 3D 05.07.2007 | 02:49
          Avatar Branislav Poldauf Ubuntu LTS, Debian stable  Používateľ
          #najprv zalohovat xorg.conf bud klasickym skopirovanim na ine miesto napr plochu alebo
          (v konzole)
          cp /etc/X11/xorg.conf /home/vaseprihlasovciemeno/Desktop
          #(umiest xorgu moze byt ine)

          #sice neviem ako presne je to v mandrive ale pre ubuntu plati toto

          #(do kozoly ako root)
          gedit /etc/X11/xorg.conf
          #(mozno je xorg v mandrive inde ja neviem)
          #a tam treba najst Section "Screen" a zmenit ju aby vyzerala takto

          Section "Screen"
          Identifier "Default Screen"
          Device "nVidia Corporation NV43 [GeForce 6600 GT]"
          Monitor "Všeobecný monitor"
          Defaultdepth 24 (#toto je to dolezite podla toho navodu aby tam bolo 24)

          #dalej su rozlisenie pre dane hlbky

          AK NEPOJDE DALEJ SKUS TOTO

          odporucaju pohrabat sa v beryle v casti windows decorations

          AK NEPOJDE SKUSIT TOTO

          #pridat do xorgu(tam kde sa menilo to 24 v prvom kroku) toto
          #podla nich do sekcie screen (ta ista co hore)


          Option "AddARGBGLXVisuals" "True"
          Option "AllowGLXWithComposite" "True"


          #ale ja to mam v sekcii device takto


          Section "Device"
          Identifier "nVidia Corporation NV43 [GeForce 6600 GT]"
          Driver "nvidia"
          Busid "PCI:4:0:0"
          Option "AddARGBVisuals" "True"
          Option "AddARGBGLXVisuals" "True"
          Option "NoLogo" "True"


          #napis ak som nieco napisal nezrozumitelne este pred tyzdnom som tomu nerozumel ani ja tak dufam ze pomoze
          len pre istotu riadky zacinajuce # su len moze poznamky nikde ich nekopiruj
          Linux: the operating system with a CLUE... Command Line User Environment
          • Re: mandriva 2007 spring a 3D 05.07.2007 | 11:54
            Avatar kuko Ubuntu 7.04  Používateľ
            ja tam mam toto napisane ako original no a neviem co mam napisat do toho device lebo ja mam ati radeon x700

            Section "Screen"
            Identifier "screen1"
            Device "device1"
            Monitor "monitor1"
            DefaultColorDepth 24
            ICQ: 350668302 Jabber: Lukas@jabbim.sk
            • Re: mandriva 2007 spring a 3D 05.07.2007 | 23:02
              Avatar Branislav Poldauf Ubuntu LTS, Debian stable  Používateľ
              a mas vobec nainstalovane ovladace na tu atinu ???

              plus podla toho com som cital inde do toho device nevpisuj nic iba do sekcie "screen" tie dva Optiony

              to v sekcii "device je pravdepodobne iba pre NVidie
              Linux: the operating system with a CLUE... Command Line User Environment
              • Re: mandriva 2007 spring a 3D 05.07.2007 | 23:05
                Avatar Branislav Poldauf Ubuntu LTS, Debian stable  Používateľ
                teda chcel som povedat ze sa vobec netyka tohoto problemu s 3D tyka sa grafiky ani ti co mate nvidie to radsej nevpisujte (pre istotu lebo nechcem byt povodcom problemov koli tomu ze davam zel rady)
                Linux: the operating system with a CLUE... Command Line User Environment
              • Re: mandriva 2007 spring a 3D 06.07.2007 | 18:08
                Avatar kuko Ubuntu 7.04  Používateľ
                mam ale ked mam xgl tak mi nejde spustit a ked ho vypnem tak to spustim preco neviete ??
                ICQ: 350668302 Jabber: Lukas@jabbim.sk
                • Re: mandriva 2007 spring a 3D 06.07.2007 | 20:23
                  Avatar Branislav Poldauf Ubuntu LTS, Debian stable  Používateľ
                  to podla mna znaci jedine ze tie ovladace asi dobre nefunguju, skus ine novsie mozno aj starsie fakt neviem s atinami nemam skusenosti
                  Linux: the operating system with a CLUE... Command Line User Environment
                  • Re: mandriva 2007 spring a 3D 06.07.2007 | 20:26
                    Avatar Branislav Poldauf Ubuntu LTS, Debian stable  Používateľ
                    inac ked spustis beryla klikni na jeho ikonu v system try pravou mysou a zmen nieco v ADVANCED BERYL OPTIONS skusk zmenit RENDERING PLATFORM, BLINDING, RENDERING

                    ale to je iba vystrel do tmy za pokus nic nedas
                    Linux: the operating system with a CLUE... Command Line User Environment
                    • Re: mandriva 2007 spring a 3D 06.07.2007 | 22:34
                      Avatar kuko Ubuntu 7.04  Používateľ
                      ok skusim
                      ICQ: 350668302 Jabber: Lukas@jabbim.sk
            • Re: mandriva 2007 spring a 3D 05.07.2007 | 23:10
              Avatar Branislav Poldauf Ubuntu LTS, Debian stable  Používateľ
              ak to pomoze tu je kopia mojho xorgu

              # /etc/X11/xorg.conf (xorg X Window System server configuration file)
              #
              # This file was generated by dexconf, the Debian X Configuration tool, using
              # values from the debconf database.
              #
              # Edit this file with caution, and see the xorg.conf(5) manual page.
              # (Type "man xorg.conf" at the shell prompt.)
              #
              # This file is automatically updated on xserver-xorg package upgrades *only*
              # if it has not been modified since the last upgrade of the xserver-xorg
              # package.
              #
              # If you have edited this file but would like it to be automatically updated
              # again, run the following command:
              # sudo dpkg-reconfigure -phigh xserver-xorg

              Section "Files"
              Fontpath "/usr/share/fonts/X11/misc"
              Fontpath "/usr/share/fonts/X11/cyrillic"
              Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
              Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
              Fontpath "/usr/share/fonts/X11/Type1"
              Fontpath "/usr/share/fonts/X11/100dpi"
              Fontpath "/usr/share/fonts/X11/75dpi"
              # path to defoma fonts
              Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
              EndSection

              Section "Module"
              Load "i2c"
              Load "bitmap"
              Load "ddc"
              Load "extmod"
              Load "freetype"
              Load "glx"
              Load "int10"
              Load "vbe"
              EndSection

              Section "InputDevice"
              Identifier "Generic Keyboard"
              Driver "kbd"
              Option "CoreKeyboard"
              Option "XkbRules" "xorg"
              Option "XkbModel" "pc105"
              Option "XkbLayout" "sk"
              EndSection

              Section "InputDevice"
              Identifier "Configured Mouse"
              Driver "mouse"
              Option "CorePointer"
              Option "Device" "/dev/input/mice"
              Option "Protocol" "ImPS/2"
              Option "ZAxisMapping" "4 5"
              Option "Emulate3Buttons" "true"
              EndSection

              Section "InputDevice"
              Driver "wacom"
              Identifier "stylus"
              Option "Device" "/dev/input/wacom"
              Option "Type" "stylus"
              Option "ForceDevice" "ISDV4"# Tablet PC ONLY
              EndSection

              Section "InputDevice"
              Driver "wacom"
              Identifier "eraser"
              Option "Device" "/dev/input/wacom"
              Option "Type" "eraser"
              Option "ForceDevice" "ISDV4"# Tablet PC ONLY
              EndSection

              Section "InputDevice"
              Driver "wacom"
              Identifier "cursor"
              Option "Device" "/dev/input/wacom"
              Option "Type" "cursor"
              Option "ForceDevice" "ISDV4"# Tablet PC ONLY
              EndSection

              Section "Device"
              Identifier "nVidia Corporation NV43 [GeForce 6600 GT]"
              Driver "nvidia"
              Busid "PCI:4:0:0"
              Option "AddARGBVisuals" "True"
              Option "AddARGBGLXVisuals" "True"
              Option "NoLogo" "True"
              EndSection

              Section "Monitor"
              Identifier "Všeobecný monitor"
              Option "DPMS"
              Horizsync 28-64
              Vertrefresh 43-60
              EndSection









              #sem treba dopisat tie dva Optiony


              Section "Screen"
              Identifier "Default Screen"
              Device "nVidia Corporation NV43 [GeForce 6600 GT]"
              Monitor "Všeobecný monitor"
              Defaultdepth 24

              #toto su ony dole

              Option "AddARGBGLXVisuals" "True"
              Option "AllowGLXWithComposite" "True"

              #toto su ony hore

              Option "TwinView" "true"
              Option "SecondMonitorHorizSync" "28-64"
              Option "SecondMonitorVertRefresh" "43-60"
              Option "MetaModes" "NULL,1280x1024"

              Option "TwinViewOrientation" "RightOf"
              Option "ConnectedMonitor" "DFP, CRT"
              SubSection "Display"
              Depth 1
              Modes "1280x1024" "1024x768" "800x600" "640x480"
              EndSubSection
              SubSection "Display"
              Depth 4
              Modes "1280x1024" "1024x768" "800x600" "640x480"
              EndSubSection
              SubSection "Display"
              Depth 8
              Modes "1280x1024" "1024x768" "800x600" "640x480"
              EndSubSection
              SubSection "Display"
              Depth 15
              Modes "1280x1024" "1024x768" "800x600" "640x480"
              EndSubSection
              SubSection "Display"
              Depth 16
              Modes "1280x1024" "1024x768" "800x600" "640x480"
              EndSubSection
              SubSection "Display"
              Depth 24
              Modes "1280x1024" "1024x768" "800x600" "640x480"
              EndSubSection
              EndSection

              Section "ServerLayout"
              Identifier "Default Layout"
              screen "Default Screen"
              Inputdevice "Generic Keyboard"
              Inputdevice "Configured Mouse"
              Inputdevice "stylus" "SendCoreEvents"
              Inputdevice "cursor" "SendCoreEvents"
              Inputdevice "eraser" "SendCoreEvents"
              EndSection

              Section "DRI"
              Mode 0666
              EndSection
              Linux: the operating system with a CLUE... Command Line User Environment
    • Re: mandriva 2007 spring a 3D 06.07.2007 | 18:25
      LOL   Návštevník
      no necuduj sa ze ti to nefunguje ved je to Linux, pokym nastavis manualne vsetky configy co potrebujes bud zostarnes alebo sa ti na linuxe pokazi nieco ine a ty ho budes musiet preinstalovat. no a potom ta vecna muka nastavovat vsetko odznovu :-( alebo :-))). minule som klikol v pclinuxe na test zobrazovania grafiky, s spadol mi cely system, vrchlom bolo ze mi prestalo bootovat aj moje XP, linux sa postaral zaroven aj o neho :-)). takze radim na nic neklikat a nic nove neinstalovat, jedine ak mas fuuru casu, lebo moj cas je drahy :-)
      • Re: mandriva 2007 spring a 3D 06.07.2007 | 20:22
        Avatar Branislav Poldauf Ubuntu LTS, Debian stable  Používateľ
        fuu tak ty si iny amater
        a ktomu alibista, aky OS pouzivas - win (stavim sa ze legalne)
        a ja ako niekto kto v zivote nevidel linux som bol schopny pochopit vsetky zaklady aj spojitosti za tyzden

        a skus si napr do winu pridat nejake netipicke rozlisenie, z vlastnych skusenosti sa to neda

        a ked si spomeniem na neustale odstranovanie spywaru a virov tak ma triafa slak
        nehovoriac o tom ze ked ti pod winom padne program spomaly alebo znefunkcni cely sytem ale o to sa nestaras lebo to sa inac neda, takisto v line sa nastavovat inac neda
        treba si zvyknut

        ked ti padne program pod linom ostatne programy behaju pohode dalej

        dalsia vec pri instalacii win, jeho ovladacov a programov kolko krat si musel restartnut comp (tipnem 7 krat)
        pri linuxe staci raz po instalacii a dalej iba pri zasahoch do jadra
        neviem ako sa vyznas do hardwaru ale resety a najma tvrde znizuju zivotnos


        a ked nieco nefunguje netreba sa vzdat ale snazit sa problem vyriesit

        +k tomu bootovaniu windowsu stiahni si nortonghosta live cd ten vie obnovovat boot particiu aj zmenit boot.ini ak ti teda zostal funkcny windows, pripadne si vytvor na inom kompe(funkcnom) diskety na ktoru das tieto subory "boot.ini , ntldr , ntdetect.com" a musis spravne nastavit bootovaciu particiu

        howg
        Linux: the operating system with a CLUE... Command Line User Environment