prosim o pomoc . mam scaner ARTEC e+PRO a neviem ho spojazdnit. mam distro pclinuxos
system ho detekuje ale nevie s nim robit .
pri pri nastavovani mi hlasi ze asi budem musiet pri kazdom starte cez skript natiahnut firmware
skusal som vsetko mozne aj aktualizaciu z particie viddovs ale nic.
na win98 ide
je to skaner napajany z usb cize ma len jeden kabel
nic sa mi nepodarilo vygooglit ak som nasiel drivery tak len pre win
riso
scaner
Pre pridávanie komentárov sa musíte prihlásiť.
tvoj scanner sa nachadza na tomto zozname podporovanych scanerov
je pri nom uvedene ze je podpora minimalna, to znamena ze by si mal nahlasit ako dopadnes. v pripade ze bude hlavica skakat na konci skenovania tak ho rychlo odpoj zo zastrcky
pouzijes ovladac sane-artec_eplus48u.
budes potrebovat firmver obvykle je nazvany Artec48.usb alebo 1200.usb a nachadza sa na instalacnom CD alebo vo windowse c:\windows\system32\drivers.
/usr/local/etc/sane.d/artec_eplus48u.conf - toto je konfiguracny subor. otvor ho ako root a zmen tieto nastavenia:
artecFirmwareFile /usr/local/share/sane/artec_eplus48u/Artec48.usb
Cesta k suboru z firmverom. tato volba je potrebna.
redGamma 1.0
greenGamma 1.0
blueGamma 1.0
masterGamma 1.9
Toto su standardne nastavenia gamy. Ak nastavis v skenovacom programe "standardne" nastavenie, volby gamy sa prepnu na tu zadane hodnoty.
redOffset 0x28
greenOffset 0x2f
blueOffset 0x2f
redExposure 0xa7
greenExposure 0x116
blueExposure 0xdc
Toto su standardne hodnoty pre cas cakania a expozicie. mozete ich zmenit ak chcete urychlit kalibraciu, ak nechcete ukladat kalibracne data na disk
vendorString Artec
modelString E+ 48U
Tu si napiste lubovolny nazov vasho skeneru.
zatial diki
zmenil som adresu a scener to spusti ale nenaskenuje vsetko je cierne
---artec_eplus48u.conf----------
# artec_eplus48u - SANE Backend configuration file
# This section is for use with the Artec E+ 48U scanner
# This scanner is also sold as
# Tevion MD 9693, Medion MD 9705, Medion MD 9693, Medion MD4394
# This sections contains verbose description of each option.
# For other scanners, see below.
#
# The USB section:
# each device needs at least the following line:
# usb vendor-ID and product-ID
# Every device configuration in this file must begin with an usb entry.
usb 0x05d8 0x4003
# Path to the firmware file
# This file comes with the Windows driver
# The scanner won't work without it
option artecFirmwareFile /usr/local/share/sane/artec_eplus48u/1200.usb
# Is the scanner an Artec E Plus Pro (or compatible)? 0 = no, 1 = yes
# for adjusting the default gamma values
#Use this options to set the default offset and exposure time values.
# The vendor and model string
# This string is displayed by the frontends. If you do not want to get your
# scanner reported as "Artec E+ 48U", then change the option accordingly.
# device-name
#
# If autodetection does not work, then you can specify the device here
# The device entry must be the last one in this config file (or the last one before a
# new usb entry).
#If you are using libusb, a device looks like this:
#device libusb:001:002
#If you are using the scanner module (kernel driver), a device looks like this:
#device /dev/usbscanner
# ----------------------------------------------------------------------------
# Since the Trust Easy Webscan 19200 uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4006
# ----------------------------------------------------------------------------
# Since the Memorex Mem48U uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4005
# ----------------------------------------------------------------------------
# Since the Trust 240H Easy Webscan Gold uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4007
# ----------------------------------------------------------------------------
# Since the UMAX AstraSlim SE uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4009
# ----------------------------------------------------------------------------
# This section is for the Artec E+ Pro
# Note, that the name of the firmware file is called 1200.usb for
# this device
usb 0x05d8 0x4004
# ----------------------------------------------------------------------------
# This section is for the UMAX AstraSlim 1200 SE
# Note, that the name of the firmware file is called 1200.usb for
# this device
usb 0x05d8 0x4010
# ----------------------------------------------------------------------------
# Since the Yakumo Scan50 uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4011
no diky
mne to ide podla tohto