Pekne prosim o zachranu mojeho ubuntu...Dlho som mal problem zohnat usb wifi , teraz toto, prosim pekne, jak sa zmeni rozlisenie na ine....ako mam? Mam 14 monitor a meni mi to na 1400x1050 defaultne , a neda sa to nastavit na ine rozlisenie, mi ani neponukne, davam vypis mojeho xorg. Prosim o navod typu ....stlac, napis.....krok za kroko, dakujem
mam grafiku ati mobility radeon 7500, notas compaq evo n610C
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "sk"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSection
Zachrante mi ubuntu
Pre pridávanie komentárov sa musíte prihlásiť.
http://rapidshare.com/files/148730373/Xorg.0.log.tar.gz.html
ak sa da prosim pozrite niekto na to, dakujem
The download session has expired.
http://www.nahraj.cz/content/dw/67265999-5b39-42ec-817b-89004d8c9749
Ale k povodnemu problemu, ten monitor co si pripajal sa tvari ako keby sa nevedel podpisat (Detected non-DDC Monitor Type: 0) na DDC kanali a tak sa mu dostalo prirodzeneho rozlisenia pre display z notebooku (Panel Size from BIOS: 1400x1050, velkost 28x21cm). Trochu blbo sa to hldalo, ako keby si stale mackal klavesu prepinajucu monitor z notebooku na externe akvarium.
Absencia DDS signalu je v dnesnej dobe dost osemetna situacia aj ked vela externych LCD monitorov to tiez nepouziva. Obvykle je sposobena tym ze monitor nema danu funkcionalitu alebo na kabli nie je spojeny drot po ktorom to ide. To sa da obvykle ojebabrat vytvorenim plne nadefinovaneho konfiguraku pre xwindows alebo rucnym pridanim rozsahu frekvencii pre dany monitor a jeho aktivaciou. K tomu bude treba polaborovat. Takze ak mas display na notebooku funkcnu, tak by som bol za skusenie tych prikazov.
Skus sem napisat aky mas monitor a ake rozlisenia a frekvencie zvlada, pochopitelne neprekladane rozlisenia (non interlaced), z prekladanych by ta rozboleli nielen oci ale aj hlava do par minut. Cez xrandr sa da urobit vselico.
PS.: slepa editacia konfigu je zdlhavejsie riesenie z ktoreho sa da vybruslit len cez niekolko rebootov a tie tiez zdrzuju.
Screen 0: minimum 320 x 200, current 1400 x 1050, maximum 1400 x 1200
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-0 disconnected (normal left inverted right x axis y axis)
LVDS connected 1400x1050+0+0 (normal left inverted right x axis y axis) 286mm x 214mm
1400x1050 59.9*
S-video disconnected (normal left inverted right x axis y axis
ale skus zapnut monitor aj cez klavesy a spustit toto:
xrandr --newmode "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
xrandr --newmode "800x600@55.8" 37.44 800 816 928 1072 600 600 605 626
tym pridas dva graficke mody pre xwindow
xrandr --addmode LVDS "1024x768@60"
xrandr --addmode LVDS "800x600@55.8"
tymto ich priradis deklu z notebooka
xrandr -s 1
tym to prepnes na iny mod (zacinaju od nuly, otazkou je ako ich triedi), mozes aj cez graficke klikatko
xrandr --output VGA-0 --same-as LVDS
tym vyklonujes kryt notebooku na VGA output.
Aspon myslim, dlho som to nerobil. Dalo by sa povedat ze som mal podobny problem, ale mne staci jedine rozlisenie 1152x768 na mojom 14.5 monitore.
Inak, najlepsie je pridat dane rozlisenia do konfiguraku pre xwindows rovno aj s definiciou tych frekvencii do suboru /etc/X11/xorg.conf nejako takto:
Section "Monitor" Identifier "Configured Monitor" HorizSync 28-51 #tu si oprav podla seba frekvencie VertRefresh 43-60 #aj tu ModeLine "800x600@55.8" 37.44 800 816 928 1072 600 600 605 626 ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync EndSection Section "Device" Identifier "Configured Video Device" Driver "radeon" VendorName "ATI Technologies Inc" # BusID "PCI:0:16:0" EndSection Section "Screen" Identifier "Default Layout" Device "Configured Video Device" Monitor "Configured Monitor" SubSection "Display" Viewport 0 0 Depth 15 Modes "800x600@55.8" "1024x768@60" "1400x1050" EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "800x600@55.8" "1024x768@60" "1400x1050" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "800x600@55.8" "1024x768@60" "1400x1050" EndSubSection EndSectionAle ber to len ako inspiraciu.
Popripade ked chces vyzerat ako Guru, tak si urob na ploche skript s tymi prikazmi pre xrandr a potom to vedla niekoho spusti zo slovami "sorry, nechcelo sa mi". Obvykle to odpali testovaci subjekt minimalne na pol minuty.
PS.: mozes si tam pridat aj ine rozlisenia, len si ich pred tym vyskusaj cez ten xrandr ci to tvoja zostava utiahne a ci to tvoje oci neunavi :-)