POMOC. ako nainstalujem ovládače na zvukovku.. na book asus m 50Vc

...aplikácie > nastavenia >zvuk a multimédiá>zvukový systém
na karte hardware v záložke, ktorú rozbalíš( zvukový systém), si vyberieš, otestuješ a začneš používať.....
ak to teda nie je nejaká vážna exotika

1. akú maš zvukovku
2. zisti aký kernel modul potrebuješ
3. zisti či ho máš načítaný

resp. čo ti dáva "lsmod | grep snd" ?

čítať ešte viem, že po prepísani alsa base súboru restart pc. a čo sa týka totho alsamixer tak som vš. funkcie preskúšal čo sa dali.. teda vypnutie a zapnutie zvuku a hlasitosť a hlasitosť osobitne pre kažký kanal..


po otvorení toho súbru teda priečinka tam bol txt. súbor a v nom bol napísané:

v anj som slabší tak som to zato sem hodil celé.



Advanced Linux Sound Architecture - Driver
=====================================
Configuration guide


Kernel Configuration
====================

To enable ALSA support you need at least to build the kernel with
primary sound card support (CONFIG_SOUND). Since ALSA can emulate OSS,
you don't have to choose any of the OSS modules.

Enable "OSS API emulation" (CONFIG_SND_OSSEMUL) and both OSS mixer and
PCM supports if you want to run OSS applications with ALSA.

If you want to support the WaveTable functionality on cards such as
SB Live! then you need to enable "Sequencer support"
(CONFIG_SND_SEQUENCER).

To make ALSA debug messages more verbose, enable the "Verbose printk"
and "Debug" options. To check for memory leaks, turn on "Debug memory"
too. "Debug detection" will add checks for the detection of cards.

Please note that all the ALSA ISA drivers support the Linux isapnp API
(if the card supports ISA PnP). You don't need to configure the cards
using isapnptools.


Creating ALSA devices
=====================

This depends on your distribution, but normally you use the /dev/MAKEDEV
script to create the necessary device nodes. On some systems you use a
script named 'snddevices'.


Module parameters
=================

The user can load modules with options. If the module supports more than
one card and you have more than one card of the same type then you can
specify multiple values for the option separated by commas.

Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.

Module snd
----------

The core ALSA module. It is used by all ALSA card drivers.
It takes the following options which have global effects.

major - major number for sound driver
- Default: 116
cards_limit
- limiting card index for auto-loading (1-8)
- Default: 1
- For auto-loading more than one card, specify this
option together with snd-card-X aliases.
slots - Reserve the slot index for the given driver.
This option takes multiple strings.
See "Module Autoloading Support" section for details.
Hz)

este som narazil na túto stránku http://ubuntuforums.org/archive/index.php/t-940689.html

citujem: We have an ASUS M50VM that has an Intel Corporation 82801I (ICH9 Family) HD Audio Controller (Rev 03). Couldnt get it to work, went through the entire OpenSound reconfiguration, Did the irqpoll thing, And the snd-hda-intel enable_msi = 1. No Dice.

Just before I went to sleep last night, I found some Other settings by searching for "options snd-hda-intel"... and Someone else had some additional settings that I added to /etc/modprobe.d/alsa-base:

options snd-hda-intel model=3stack-dig
options snd-hda-intel enable_msi=1
options snd-hda-intel single_cmd=1

Did the edit, rebooted, and sure enough the lovely sound of drums!!!