Pripojenie cez DHCP nefunguje (Lenovo 3000 N200)

Sekcia: Konfigurácia 23.01.2009 | 19:10
Avatar Jozef Šandor Debian  Používateľ
Z neznamych pricin sa moj notebook Lenovo 3000 N200 nedokaze pripojit pomocou DHCP k internetu (eth0). Vyskusal som niekolko linuxovych distribucii no efekt je vzdy rovnaky (Ubuntu 8.10, Kubuntu 8.10, LinuxMint 6, Fedora 10). Pod WindowsXP pripojenie cez DHCP ide bez problemov. Pokial zadam cez Network Manager pevne adresy, vsetko ide ako ma. Aby som vylucil mozne problemy s linuxom na strane mojho providera, nabootoval som live CD Ubuntu na moj desktop a ten sa bezproblemov pomocou DHCP k internetu pripojil.

Vypis ifconfig-u z notebooku (snad z toho nieco vycitate, lebo mne to nehovori takmer nic):
eth0 Link encap:Ethernet  HWaddr 00:1b:38:0c:09:1b  
          inet6 addr: 2a02:130:1700:520:21b:38ff:fe0c:91b/64 Scope:Global
          inet6 addr: fe80::21b:38ff:fe0c:91b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:157 errors:0 dropped:0 overruns:0 frame:0
          TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:12582 (12.5 KB)  TX bytes:3634 (3.6 KB)
          Interrupt:19 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:246 errors:0 dropped:0 overruns:0 frame:0
          TX packets:246 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:15408 (15.4 KB)  TX bytes:15408 (15.4 KB)

wlan0     Link encap:Ethernet  HWaddr 00:1c:bf:38:b8:47  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wmaster0  Link encap:UNSPEC  HWaddr 00-1C-BF-38-B8-47-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Vypis dhclient eth0:
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/eth0/00:1b:38:0c:09:1b
Sending on   LPF/eth0/00:1b:38:0c:09:1b
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
No DHCPOFFERS received.
No working leases in persistent database - sleeping.

V com je chyba? Pozna niekto nejaky osvedceny sposob ako moj problem odstranit? Vopred vas prosim o trpezlivost a konkretny postup ako problem odstranit, kedze som v linuxovom svete zatial len zaciatocnik. Dakujem.

Pre pridávanie komentárov sa musíte prihlásiť.

    • Re: Pripojenie cez DHCP nefunguje (Lenovo 3000 N200) 25.01.2009 | 13:41
      Avatar Jozef Šandor Debian  Používateľ
      Zistil som, ze pri vypise ifconfig-u na desktope je pri eth0 este jeden riadok navyse s inet adresami vo v4 a mozno prave preto mi tam narozdiel od notebooku ide internet. Je mozne, ze riesenim mojho problemu bude prinutit DHCP, aby si namiesto IPv6 adries vyziadal IPv4 adresy...ako by som toho mohol (bezpecne) dosiahnut?
    • Re: Pripojenie cez DHCP nefunguje (Lenovo 3000 N200) 25.01.2009 | 13:47
      Avatar samox86 arch, debian  Administrátor
      co ti vypise cat /etc/network/interfaces ?
      samo@ubuntu:/etc/network$ cat interfaces
      # This file describes the network interfaces available on your system
      # and how to activate them. For more information, see interfaces(5).

      # The loopback network interface
      auto lo
      iface lo inet loopback
      address 127.0.0.1
      netmask 255.0.0.0

      # The primary network interface
      auto eth0
      #iface eth0 inet dhcp
      samo@ubuntu:/etc/network$
      lnx.sk - virtualne servery; Lnx@Lnx.sk
LinuxOS.sk © 2004-2024 | LinuxOS.sk - Team | ISSN 1337-7639 | Osobné údaje | Odber noviniek
Hosting sponzorovaný vpsFree.cz o.s.