internet O2 a Samsung SGH D980
Prosim o pomoc pri nastaveni/nakonfigurovani internet. spojenia cez internetO2 ,MT Samsung SGH D980 ako modem s PC Ubuntu 9.10. Skusal som cez Gnome PPP a nič.
Pre pridávanie komentárov sa musíte prihlásiť.
O Linuxe
Portál
Odporúčame
Podporte nás
Ak sa vám táto stránka páči, môžete nás podporiť tak, že si na vaše stránky umiestnite tento banner.
Náš Twitter tag je #LinuxOSsk
musis napisat v ktorom bode sa to zasekne, co konkretne nefunguje, ako sa to prejavuje ake presne kroky si spravil
ja to robim takto:
1.nainstalujem si blueman (namiesto toho predinstalovaneho v ubuntu)
2.otvorim ho a vyhladam zariadenia
3.najdeny telefon dam sparovat a dam ze VERIT (TRUST - ta kviezdicka)
4.klinem pravym na sparovany telefon a vyberiem services → dial up service
5.otvori sa klikatko v ktorom mu poviem ze mam orange net (ty mu manualne nastavis O2 predvolby)
6.otvorim network managera a vyberiem pripojit na orange internet (nazves si ho v tom klikatku)
7.surfujem
funguje zarucene s nokiou E51, N97mini, a SE-K610i s pouzivanim orange world internetu v mobile
kym nenapises viac neviem poradit
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATX3
NO CARRIER
ATX3
OK
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATX3
ATX3
OK
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATX3
ATX3
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Please enter password (or empty password to stop):
--> Configuration does not specify a valid login name.
--> Configuration does not specify a valid password.
treba ich niekam zadat ake si ti povie google alebo o2support
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","o2internet"
AT+CGDCONT=1,"IP","o2internet"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Wed Jan 20 18:03:04 2010
--> Pid of pppd: 1878
--> Using interface ppp0
--> pppd: ��� ��
--> pppd: ��� ��
--> pppd: ��� ��
--> pppd: ��� ��
--> pppd: ��� ��
--> pppd: ��� ��
--> pppd: ��� ��
--> Disconnecting at Wed Jan 20 18:03:09 2010
--> The PPP daemon has died: A modem hung up the phone (exit code = 16)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
--> Auto Reconnect will be attempted in 5 seconds
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","o2internet"
AT+CGDCONT=1,"IP","o2internet"
OK
--> Modem initialized.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","o2internet"
AT+CGDCONT=1,"IP","o2internet"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
^CCaught signal 2: Attempting to exit gracefully...
--> Disconnecting at Wed Jan 20 18:04:15 2010
budem vam vdacny za kazdu radu..
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- SAMSUNG SGH-D980
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found an USB modem on /dev/ttyACM0.
/etc/wvdial.conf<Warn>: Ignoring malformed input line: "Dialer Defaults]"
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
boss@boss-desktop:~$