ked dam connect with 3G tak mi vypise toto: http://imageshack.us/photo/my-images/94/snmek1n.png/
na opensuse 11.4 ide bez probelmov
internet cez sakis3g vSLAXe, modem samsung z810
Sekcia: Hardware a Drivery
05.08.2011 | 13:53
Adam
MintPPC(PowerPC), Fedora Asahi Remix(MBP M1)
Používateľ
Pre pridávanie komentárov sa musíte prihlásiť.
/dev/ttyUSB0
Ono, ajtak na konci visí klasický Hayes kompatibilný modem a systému by malo byť srdečne jedno na aký typ znakového zariadenia posiela tých zopár slov pred tým ako aktivuje prenos pomocou PPP.
ale co nejde je predsa na tom obrazku
Tak sa maj.
No, na druhú stranu tam určite nebude ani balík vwdial a ani nič iné s čim sa dá nastaviť sieť. Je tak?
root@localhost RPM1]# wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3 USB0 USB1
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- ERROR
ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: SAMSUNG ELECTRONICS CORPORATION
ttyUSB2<*1>: Speed 9600: AT -- OK
ttyUSB2<*1>: Max speed is 9600; that should be safe.
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB4<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB4<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB4<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: USB5
Found a modem on /dev/ttyUSB2.
/etc/wvdial.conf<Warn>: Can't open '/etc/wvdial.conf' for reading: No such file or directory
/etc/wvdial.conf<Warn>: ...starting with blank configuration.
Modem configuration written to /etc/wvdial.conf.
ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2"
[root@localhost RPM1]# wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2
ATQ0 V1 E1 S0=0 &C1 &D2
OK
--> Modem initialized.
--> Configuration does not specify a valid phone number.
--> Configuration does not specify a valid login name.
--> Configuration does not specify a valid password.
[root@localhost RPM1]#
este mi prosim ta porad ako tam mam nastavit providera orange