Ahojte, prosim o radu ako spustim python skript pri starte linuxu. Urobil som toto:
Do /etc/rc5.d som vytvoril link S05tornado_server, ktory odkazuje na /etc/init.d/tornado_server.
Obsahom suboru tornado_server je:
#!/bin/sh
cd /var/www
sudo ./server.py &
exit
pokial spustim manualne cez konzolu S05tornado_server, tak to funguje ale pri starte nie.
PS. ako sem vlozim kod aby bol rozdielny, rozlisitelny od normalneho textu ?
Aku pouzivas distribuciu?
Mrkni /etc/inittab a pozri ktory spusta skript v runleveli 5 a don dopis spustanie. Ak nie, tak ptm v nom zadefinuj, nech Ti spusta ten skript. Vid format inittabu.
Alebo pridaj volanie skriptu do /etc/rc.d/rc.local (Nespusta sa v administr. rezime a pri vypnuti/restarte).
Malo by to tak byt.
P.S.: <pre> obsah kodu</pre>
Ahoj, priznam sa, ze moc tomu vypisu nerozumiem. Pouzivam Embedded Debian. To <pre></pre> nejako nefunguje.
<pre>
# /etc/inittab: init(8) configuration.
# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
# The default runlevel.
id:2:initdefault:
# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS
# What to do in single-user mode.
~~:S:wait:/sbin/sulogin
# /etc/init.d executes the S and K scripts upon change
# of runlevel.
#
# Runlevel 0 is halt.
# Runlevel 1 is single-user.
# Runlevels 2-5 are multi-user.
# Runlevel 6 is reboot.
l0:0:wait:/etc/init.d/rc 0
l1:1:wait:/etc/init.d/rc 1
l2:2:wait:/etc/init.d/rc 2
l3:3:wait:/etc/init.d/rc 3
l4:4:wait:/etc/init.d/rc 4
l5:5:wait:/etc/init.d/rc 5
l6:6:wait:/etc/init.d/rc 6
# Normally not reached, but fallthrough in case of emergency.
z6:6:respawn:/sbin/sulogin
# What to do when CTRL-ALT-DEL is pressed.
ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
# Action on special keypress (ALT-UpArrow).
#kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."
# What to do when the power fails/returns.
pf::powerwait:/etc/init.d/powerfail start
pn::powerfailnow:/etc/init.d/powerfail now
po::powerokwait:/etc/init.d/powerfail stop
# /sbin/getty invocations for the runlevels.
#
# The "id" field MUST be the same as the last
# characters of the device (after "tty").
#
# Format:
# <id>:<runlevels>:<action>:<process>
#
# Note that on most Debian systems tty7 is used by the X Window System,
# so if you want to add more getty's go ahead but skip tty7 if you run X.
#
1:2345:respawn:/sbin/getty 38400 tty1
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6
# Example how to put a getty on a serial line (for a terminal)
#
#T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
# Example how to put a getty on a modem line.
#
#T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
T0:2345:respawn:/sbin/getty -L ttyS0 115200 vt100</pre>
kristaboha dalsi odbornik.
do initrd to mohol dat. alebo nie, pockaj, rovno do jadra...
No, ked si taky odbornik, tak si mohol napist nieco k veci. Primitivne odpovede si nahulakaj do trenek.
Uz som si to vyriesil.