Preinštaloval som 17tku na 18-tku MX,na 17-tke bolo "jednoducvhé skenovanie",18 nemá problémy s tlačou ale skenovať nechce cez počítač iba na papier.existuje tam niečo o čom neviem?Záhradkár Lacinko...
Problém zo skenovaním
Pre pridávanie komentárov sa musíte prihlásiť.
A program na skenovanie máš nainštalovaný? Niečo ako simple-scan. Ak nie, doinštaluj.
zistiť sa to dá napr. pomocou:
apt list --installed | grep simple-scanA tiež treba mať nainštalované SANE:
sudo apt install sanetento príkaz mi vzalo...
toto mi napísalo:UPOZORNENIE: apt nemá stabilné rozhranie CLI. V skriptoch používajte opatrne.
jednoduché skenovanie/oldoldstable, teraz 3.23.2-1 amd64 [nainštalovaný]
Ok, skúsme pripojiť a zapnúť skener a potom spustiť:
sane-find-scanner..v terminále?
Toto mi vypísalo: # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions) could not open USB device 0x0bda/0x0129 at 001:006: Access denied (insufficient permissions) could not open USB device 0x13d3/0x5a01 at 001:005: Access denied (insufficient permissions) could not open USB device 0x8087/0x0a2b at 001:004: Access denied (insufficient permissions) could not open USB device 0x0458/0x6001 at 001:003: Access denied (insufficient permissions) found USB scanner (vendor=0x03f0 [HP], product=0x1853 [DeskJet 2700 series]) at libusb:001:002 could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions) # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.
# You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary.
Toto mi vypísalo: # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions) could not open USB device 0x0bda/0x0129 at 001:006: Access denied (insufficient permissions) could not open USB device 0x13d3/0x5a01 at 001:005: Access denied (insufficient permissions) could not open USB device 0x8087/0x0a2b at 001:004: Access denied (insufficient permissions) could not open USB device 0x0458/0x6001 at 001:003: Access denied (insufficient permissions) found USB scanner (vendor=0x03f0 [HP], product=0x1853 [DeskJet 2700 series]) at libusb:001:002 could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions) # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.
# You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary.
Toto mi vypísalo: # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions) could not open USB device 0x0bda/0x0129 at 001:006: Access denied (insufficient permissions) could not open USB device 0x13d3/0x5a01 at 001:005: Access denied (insufficient permissions) could not open USB device 0x8087/0x0a2b at 001:004: Access denied (insufficient permissions) could not open USB device 0x0458/0x6001 at 001:003: Access denied (insufficient permissions) found USB scanner (vendor=0x03f0 [HP], product=0x1853 [DeskJet 2700 series]) at libusb:001:002 could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions) # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.
# You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary.
Ok, scanner je detegovaný:
found USB scanner (vendor=0x03f0 [HP], product=0x1853 [DeskJet 2700 series]) at libusb:001:002
A ešte skúsme:
scanimage -L(vypíše zoznam zariadení)a potom skúsiť:
scanimage -d <názov_nájdeného_zariadenia> --format png --progress --resolution 300 --mode Color > obrazok.pngToto by malo spustiť skenovanie a vytvoriť obrázok vo formáte png.
Ak to takto pôjde, tak potom reinštalovať simple-scan, alebo xsane.
Ale teraz ma ešte napadlo - aj v GIMP-e je možnosť Súbor -> Vytvoriť -> xscanimage - načim skúsiť.
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
scanimage -d <názov_nájdeného_zariadenia> --format png --progress --resolution 300 --mode Color > obrazok.png bash: názov_nájdeného_zariadenia: Adresár alebo súbor neexistuje
Gimp tam nemám..treba príkazom stiahnúť?
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).
scanimage -d <názov_nájdeného_zariadenia> --format png --progress --resolution 300 --mode Color > obrazok.png bash: názov_nájdeného_zariadenia: Adresár alebo súbor neexistuje
1. MX 17 a 18 su nepodporovane, bol nejaky dovod aktualizovat na 18?
2. Nainstalovat xsane v 18.3 ma sane problem s Canon tlaciarnami (neviem o ktoru ide, len upozornujem)
3. na stary pc osobne odporucam antix, je sice s icewm alebo fluxbox. s istym nastavenim je mozne nainstalovat aj xfce 4
Inak richard navrhol spravny postup, kedze nemame info.
Mozno by nebolo zle doplnit:
typ scanneru / multifunkcie, mozno aspon zaklad z inxi -F
Ja som myslel že čím vyššie číslo tým lepšie-ale zistil som že nemeň čísla-nastanú problémy...
Takisto nemôžem nastaviť Firefox aby mi štartoval po spustení-v 17-tke bolo programy po spustení...
Mám tlačiareň so skenom HP-deskjet HP 2720e
Mám tlačiareň so skenom HP-deskjet HP 2720e
Pre HP tlačiarne je potrebné mať nainštalovaný balík hplip
sudo apt install hplipNačítavajú sa zoznamy balíkov... Hotovo Vytvára sa strom závislostí Načítavajú sa stavové informácie... Hotovo hplip is already the newest version (3.18.12+dfsg0-2~mx17+1). Nasledovné balíky boli nainštalované automaticky a už viac nie sú potrebné: libaom0 libaribb24-0 libbluray2 libmicrodns0 libmysofa0 libplacebo4 libspatialaudio0 libva-wayland2 libvulkan1 libx264-155 Na ich odstránenie použite „sudo apt autoremove“. 0 aktualizovaných, 0 nových nainštalovaných, 0 na odstránenie a 0 neaktualizovaných.
Skúsme ešte v prehliadači internetu (Firefox,...) zadať: http://localhost:631/
Ak je nainštalovaný CUPS, tak by sa tam mala dať HP tlačiareň konfigurovať, viď obr.
Add Printer Add Printer Connection: Examples:
http://hostname:631/ipp/ http://hostname:631/ipp/port1
ipp://hostname/ipp/ ipp://hostname/ipp/port1
lpd://hostname/queue
socket://hostname socket://hostname:9100
See "Network Printers" for the correct URI to use with your printer. ..pýta :"zadajte adresu URL"-to neviem čo je...
a co
sudo apt install -f
obcas nedotaha zavyslosti. Inak MX ma HPlip predinstalovany (mx installer)
Načítavajú sa zoznamy balíkov... Hotovo Vytvára sa strom závislostí Načítavajú sa stavové informácie... Hotovo Nasledovné balíky boli nainštalované automaticky a už viac nie sú potrebné: libaom0 libaribb24-0 libbluray2 libmicrodns0 libmysofa0 libplacebo4 libspatialaudio0 libva-wayland2 libvulkan1 libx264-155 Na ich odstránenie použite „sudo apt autoremove“. 0 aktualizovaných, 0 nových nainštalovaných, 0 na odstránenie a 0 neaktualizovaných.....tlačí dobre len sken do PC nejde-na papier skenuje!
OK, takže tlačí, dobre, to som prehliadol, ak sa to písalo.
Je záhada, že
sane-find-scannernájde skener, ale
scanimage -Lnie...
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions) could not open USB device 0x0bda/0x0129 at 001:005: Access denied (insufficient permissions) could not open USB device 0x13d3/0x5a01 at 001:004: Access denied (insufficient permissions) could not open USB device 0x8087/0x0a2b at 001:003: Access denied (insufficient permissions) could not open USB device 0x0458/0x6001 at 001:002: Access denied (insufficient permissions) found USB scanner (vendor=0x03f0 [HP], product=0x1853 [DeskJet 2700 series]) at libusb:001:006 could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions) # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.
# You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary.
scanimage -L
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).Takže idem hľadať na googli-dík za snahu...