slackware: problem s diskom

nainstaluj smartmontools a precitaj si man smartctl. verim, ze SMART ti povie, ktory odchadza

fsck na obidva disky ukazal no corruptions.

spravil som ako si povedal, nahodil som ten smartmontools. noa tu je vypis, log po uplnom otestovani oboch diskov smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 3364 - root@whitesun:~# smartctl --log=selftest /dev/hda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === Warning: device does not support Self Test Logging SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 3134 - este musim dodat ze /dev/hda ma v logu aj nejake chyby: Warning: device does not support Error Logging SMART Error Log Version: 1 Warning: ATA error count 11262 inconsistent with error log pointer 5 ATA Error Count: 11262 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 11262 occurred at disk power-on lifetime: 3133 hours (130 days + 13 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN -- -- -- -- -- -- -- 04 d1 00 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 ff 01 00 00 00 a0 08 00:00:11.760 IDENTIFY PACKET DEVICE 20 ff 01 01 00 00 a0 08 00:00:11.744 READ SECTOR(S) 91 ff 00 3f 00 00 ae 08 00:00:11.744 INITIALIZE DEVICE PARAMETERS [OBS-6] c6 ff 01 00 00 00 a0 08 00:00:11.744 SET MULTIPLE MODE 91 ff 00 3f 00 00 ae 08 00:00:11.744 INITIALIZE DEVICE PARAMETERS [OBS-6] Error 11261 occurred at disk power-on lifetime: 3133 hours (130 days + 13 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 d1 00 00 00 80 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- CL CH DH a0 00 01 00 00 80 00 08 00:00:00.000 PACKET Error 11260 occurred at disk power-on lifetime: 3133 hours (130 days + 13 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 d1 00 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 ff 01 00 00 00 a0 08 00:00:11.856 IDENTIFY PACKET DEVICE 20 ff 01 01 00 00 a0 08 00:00:11.856 READ SECTOR(S) 91 ff 00 3f 00 00 ae 08 00:00:11.856 INITIALIZE DEVICE PARAMETERS [OBS-6] c6 ff 01 00 00 00 a0 08 00:00:11.856 SET MULTIPLE MODE 91 ff 00 3f 00 00 ae 08 00:00:11.856 INITIALIZE DEVICE PARAMETERS [OBS-6] Error 11259 occurred at disk power-on lifetime: 3132 hours (130 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 d1 00 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 ff 01 00 00 00 a0 08 00:40:34.608 IDENTIFY PACKET DEVICE 20 ff 01 01 00 00 a0 08 00:40:34.608 READ SECTOR(S) 91 ff 00 3f 00 00 ae 08 00:40:34.608 INITIALIZE DEVICE PARAMETERS [OBS-6] c6 ff 01 00 00 00 a0 08 00:40:34.608 SET MULTIPLE MODE 91 ff 00 3f 00 00 ae 08 00:40:34.608 INITIALIZE DEVICE PARAMETERS [OBS-6] Error 11258 occurred at disk power-on lifetime: 3132 hours (130 days + 12 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 d1 00 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 ff 01 00 00 00 a0 08 00:31:48.816 IDENTIFY PACKET DEVICE 20 ff 01 01 00 00 a0 08 00:31:48.800 READ SECTOR(S) 91 ff 00 3f 00 00 ae 08 00:31:48.800 INITIALIZE DEVICE PARAMETERS [OBS-6] c6 ff 01 00 00 00 a0 08 00:31:48.800 SET MULTIPLE MODE 91 ff 00 3f 00 00 ae 08 00:31:48.800 INITIALIZE DEVICE PARAMETERS [OBS-6] Warning: device does not support Self Test Logging SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 3134 - Device does not support Selective Self Tests/Logging no toto bude vyzerat isto strasne, ale ak mate nejake napady, tak dakujem. PS: je mozne ze to sposobilo prehriatie? lebo teraz som otvoril case, kukal ci je vsetko ok a zatial pri otvorenej bedni to drzi (klop-klop).

Ak ti vypina disk, moze byt chyba aj v zdroji. Aky tam mas zdroj?