NETDEV WATCHDOG
NETDEV WATCHDOG: eth0: transmit timed out eth0: Transmit timeout, status 0c 0005 c07f media 50. eth0: Tx queue start entry 4 dirty entry 0. eth0: Tx descriptor 0 is 0008a03c. (queue head) eth0: Tx descriptor 1 is 0008a03c. eth0: Tx descriptor 2 is 0008a03c. eth0: Tx descriptor 3 is 0008a03c. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Surfujem a zrazu necakane ma odpoji od netu a jedine co mi zostava je len restartovat laptop.
Moje lspci
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11) 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02) 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 02:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) 02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08) 02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Skusal som uz niekolko krat upravit kernel, ale nejak neviem na to prijst ako tomu problemu predist. Prosim vas , pomozte.
Pre pridávanie komentárov sa musíte prihlásiť.
ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works.
Upravil som konfigurak zavadzaca tak aby som mal na vyber z dvoch moznosti, kernel je ten isty. Prvu moznost budem pouzivat len ked som pripojeny na LAN ( samozrejme zaroven na elektricku siet). Pridal som kernel parametre pci=noacpi a acpi=off . Pri druhej moznosti bude acpi zapnute, tj druhu moznost pouzijem ked laptop fici na baterii , bez lan , pripadne na wifi.