konfiguracie siete Fedora Core 5

preklep, chcilku=chvilku

"predpokladam ze mas tu sietovku na doske, ze?" - predpokladas dobre, je na doske. k tej ip, trafil si to uplne presne, net mam cez lokalneho providera, ktory ho poskytuje cez wifi. demsg: Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet) Linux version 2.6.15-1.2054_FC5 (bhcompile@hs20-bc1-7.build.redhat.com) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #1 SMP Tue Mar 14 15:48:20 EST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f77b0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff30c0 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff96c0 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff9600 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000001fff0000 NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000001fff0000 On node 0 totalpages: 127763 DMA zone: 2786 pages, LIFO batch:0 DMA32 zone: 124977 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) Checking aperture... CPU 0: aperture @ 25ac000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found SMP: Allowing 1 CPUs, 0 hotplug CPUs Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2010.336 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Memory: 508284k/524224k available (2307k kernel code, 15552k reserved, 1212k data, 196k init) Calibrating delay using timer specific routine.. 4025.09 BogoMIPS (lpj=8050190) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(1) -> Node 0 -> Core 0 Using local APIC timer interrupts. result 12564619 Detected 12.564 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... OK. 0 checking if image is initramfs... it is Freeing initrd memory: 1843k freed DMI 2.3 present. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *3 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *3 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *5 ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 4 of device 0000:00:06.0 PCI: Cannot allocate resource region 1 of device 0000:00:0a.0 PCI: Cannot allocate resource region 1 of device 0000:01:00.0 PCI-DMA: Disabling IOMMU. pnp: 00:01: ioport range 0x4000-0x407f could not be reserved pnp: 00:01: ioport range 0x4080-0x40ff has been reserved pnp: 00:01: ioport range 0x4400-0x447f has been reserved pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved pnp: 00:01: ioport range 0x4800-0x487f has been reserved pnp: 00:01: ioport range 0x4880-0x48ff has been reserved PCI: Failed to allocate I/O resource #1:4000@10000 for 0000:00:0a.0 PCI: Error while updating region 0000:00:06.0/4 (00001001 != 0000f001) PCI: Bridge: 0000:00:09.0 IO window: a000-bfff MEM window: d3000000-d4ffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0 PCI: Failed to allocate mem resource #1:40000000@c0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: d0000000-d2ffffff PREFETCH window: c0000000-cfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1158429148.508:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key E0DE27A645ACF9C1 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A isa bounce pool size: 16 pages RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:DMA NFORCE-CK804: simplex device: DMA disabled ide1: NFORCE-CK804 Bus-Master DMA disabled (BIOS) Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-H10A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HDS722580VLAT20, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 512KiB hdc: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63 hdc: cache flushes supported hdc: hdc1 hdc2 < hdc5 hdc6 > hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 7, 524288 bytes) TCP bind hash table entries: 16384 (order: 7, 524288 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 (1400 mV) powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 (1350 mV) powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0xc, vid 0x6 ACPI wakeup devices: HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 196k freed Write protecting the kernel read-only data: 432k input: PS/2 Generic Mouse as /class/input/input1 SCSI subsystem initialized libata version 1.20 loaded. sata_sil 0000:05:0a.0: version 0.9 ACPI: PCI Interrupt Link [APC4] BIOS reported IRQ 5, using IRQ 19 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 GSI 16 sharing vector 0xB1 and IRQ 16 ACPI: PCI Interrupt 0000:05:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 16 sata_sil: probe of 0000:05:0a.0 failed with error -12 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49. ACPI: PCI Interrupt Link [APCH] BIOS reported IRQ 0, using IRQ 23 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 GSI 17 sharing vector 0xB9 and IRQ 17 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: Couldn't find register window for device 0000:00:0a.0. forcedeth: probe of 0000:00:0a.0 failed with error -22 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 ACPI: PCI Interrupt Link [APCJ] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 GSI 18 sharing vector 0xC1 and IRQ 18 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:04.0 to 64 ieee1394: Initialized config rom entry `ip1394' ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) codec_ready: codec is not ready [0x0] Intel ICH: probe of 0000:00:04.0 failed with error -5 ACPI: PCI Interrupt Link [APCL] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 GSI 19 sharing vector 0xC9 and IRQ 19 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 19 ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -16 ehci_hcd: probe of 0000:00:02.1 failed with error -16 ACPI: PCI Interrupt Link [APC1] BIOS reported IRQ 3, using IRQ 16 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 GSI 20 sharing vector 0xD1 and IRQ 20 ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20 ohci1394: fw-host0: Unexpected PCI resource length of 0! ohci1394: MMIO resource (0x0 - 0x800) unavailable ohci1394: probe of 0000:05:0b.0 failed with error -12 ACPI: PCI Interrupt Link [APCF] BIOS reported IRQ 0, using IRQ 20 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 GSI 21 sharing vector 0xD9 and IRQ 21 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 21 ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -16 ohci_hcd: probe of 0000:00:02.0 failed with error -16 Non-volatile memory driver v1.2 Floppy drive(s): fd0 is 1.44M unexpected IRQ trap at vector d8 FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. hda: DMA disabled hda: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } hda: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 } ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 0 Buffer I/O error on device hda, logical block 0 hda: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } hda: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 } ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 0 Buffer I/O error on device hda, logical block 0 hda: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } hda: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 } ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 8 Buffer I/O error on device hda, logical block 1 hda: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } hda: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 } ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 16 Buffer I/O error on device hda, logical block 2 EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1048568k NET: Registered protocol family 15 Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.7 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 ppdev: user-space parallel port driver ppdev0: registered pardevice ppdev0: unregistered pardevice ppdev1: claim the port first ppdev2: claim the port first ppdev3: claim the port first lspci: 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: nVidia Corporation Unknown device 01df (rev a1) 05:0a.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) s tou sietovkou to mozno poriesim, pozicam od niekoho, ale aj tak si nakoniec budem musiet nainstalovat tu co mam na doske.