detekcia a konfigurácia zvukovej karty

Sekcia: Hardware a Drivery 21.12.2006 | 00:19
Avatar jamira ubuntu ee 6.10  Používateľ
prosím o podrobnejšiu pomoc pri nastavení zvukovky skúšala som vo viacerých distribúciach,neviem s tým pohnúť
    • detekcia a konfigurácia zvukovej karty 08.12.2006 | 13:19
      Avatar jamira ubuntu ee 6.10  Používateľ
      tu su výpisy z terminálu lspci -v 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) Flags: bus master, medium devsel, latency 64 Memory at 30000000 (32-bit, prefetchable) [size=256M] Capabilities: 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: 40000000-410fffff Prefetchable memory behind bridge: 20000000-200fffff 00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Flags: bus master, medium devsel, latency 66, IRQ 11 I/O ports at 2400 [size=256] Memory at 41100000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 20100000 [disabled] [size=128K] Capabilities: 00:14.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) Flags: bus master, medium devsel, latency 0 00:14.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 64 I/O ports at 2020 [size=16] 00:14.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 64, IRQ 11 I/O ports at 2000 [size=32] 00:14.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) Flags: medium devsel, IRQ 9 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Rage Pro Turbo AGP 2X Flags: bus master, VGA palette snoop, stepping, medium devsel, latency 66, IRQ 11 Memory at 40000000 (32-bit, non-prefetchable) [size=16M] I/O ports at 1000 [size=256] Memory at 41000000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: sbin/lsmod Module Size Used by binfmt_misc 13448 1 rfcomm 42260 0 l2cap 27136 5 rfcomm bluetooth 53476 4 rfcomm,l2cap apm 23280 1 speedstep_lib 5764 0 cpufreq_userspace 5408 0 cpufreq_stats 7744 0 freq_table 6048 1 cpufreq_stats cpufreq_powersave 2944 0 cpufreq_ondemand 8876 0 cpufreq_conservative 8712 0 af_packet 24584 0 parport_pc 37796 0 lp 12964 0 parport 39496 2 parport_pc,lp ipv6 272288 8 tsdev 9152 0 i2c_piix4 10000 0 evdev 11392 1 intel_agp 26012 1 agpgart 34888 1 intel_agp psmouse 41352 0 serio_raw 8452 0 pcspkr 4352 0 i2c_core 23424 1 i2c_piix4 8139cp 24832 0 8139too 29056 0 shpchp 42144 0 pci_hotplug 32828 1 shpchp mii 6912 2 8139cp,8139too floppy 63044 0 ext3 142728 3 jbd 62228 1 ext3 ide_generic 2432 0 uhci_hcd 24968 0 usbcore 134912 2 uhci_hcd ide_cd 33696 0 cdrom 38944 1 ide_cd ide_disk 18560 5 piix 11780 1 generic 5764 0 processor 31560 0 fbcon 41504 0 tileblit 3840 1 fbcon font 9344 1 fbcon bitblit 7168 1 fbcon softcursor 3328 1 bitblit vesafb 9244 0 capability 5896 0 commoncap 8704 1 capability ~$ dmesg [17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic) [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable) [17179569.184000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [17179569.184000] 0MB HIGHMEM available. [17179569.184000] 256MB LOWMEM available. [17179569.184000] On node 0 totalpages: 65536 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] Normal zone: 61440 pages, LIFO batch:15 [17179569.184000] DMI 2.1 present. [17179569.184000] ACPI: RSDP (v000 COMPAQ ) @ 0x000e0010 [17179569.184000] ACPI: RSDT (v001 COMPAQ CPQB0B5 0x19990818 0x00000000) @ 0x000e0080 [17179569.184000] ACPI: FADT (v001 COMPAQ INDY 0x00000001 0x00000000) @ 0x000e00cc [17179569.184000] ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000b) @ 0x000e0ae1 [17179569.184000] ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000b) @ 0x000e1ade [17179569.184000] ACPI: SSDT (v001 COMPAQ PME 0x00000001 MSFT 0x0100000b) @ 0x000e2252 [17179569.184000] ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000b) @ 0x00000000 [17179569.184000] ACPI: BIOS age (1999) fails cutoff (2000), acpi=force is required to enable ACPI [17179569.184000] ACPI: Disabling ACPI support [17179569.184000] Allocating PCI resources starting at 20000000 (gap: 10000000:effc0000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash locale=sk_SK [17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" [17179569.184000] mapped APIC to ffffd000 (0120a000) [17179569.184000] Enabling fast FPU save and restore... done. [17179569.184000] Enabling unmasked SIMD FPU exception support... done. [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 647.331 MHz processor. [ 53.944265] Using tsc for high-res timesource [ 53.945754] Console: colour VGA+ 80x25 [ 53.946309] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 53.946838] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 53.974013] Memory: 250344k/262144k available (1910k kernel code, 11252k reserved, 1070k data, 308k init, 0k highmem) [ 53.974026] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 54.052063] Calibrating delay using timer specific routine.. 1296.36 BogoMIPS (lpj=2592739) [ 54.052175] Security Framework v1.0.0 initialized [ 54.052193] SELinux: Disabled at boot. [ 54.052237] Mount-cache hash table entries: 512 [ 54.052580] CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 54.052602] CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 54.052630] CPU: L1 I cache: 16K, L1 D cache: 16K [ 54.052638] CPU: L2 cache: 256K [ 54.052646] CPU serial number disabled. [ 54.052653] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 54.052704] Checking 'hlt' instruction... OK. [ 54.068222] SMP alternatives: switching to UP code [ 54.068498] Freeing SMP alternatives: 16k freed [ 54.068855] checking if image is initramfs... it is [ 55.482161] Freeing initrd memory: 5212k freed [ 55.482181] CPU0: Intel Pentium III (Coppermine) stepping 03 [ 55.482197] SMP motherboard not detected. [ 55.482205] Local APIC not detected. Using dummy APIC emulation. [ 55.482408] Brought up 1 CPUs [ 55.482465] migration_cost=0 [ 55.483379] NET: Registered protocol family 16 [ 55.483455] EISA bus registered [ 55.484996] PCI: PCI BIOS revision 2.10 entry at 0xed9a0, last bus=1 [ 55.485014] PCI: Using configuration type 1 [ 55.485021] Setting up standard PCI resources [ 55.488761] ACPI: Interpreter disabled. [ 55.488774] Linux Plug and Play Support v0.97 (c) Adam Belay [ 55.488796] pnp: PnP ACPI: disabled [ 55.488806] PnPBIOS: Scanning system for PnP BIOS support... [ 55.488872] PnPBIOS: Found PnP BIOS installation structure at 0xc00f7e40 [ 55.488883] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe453, dseg 0xf0000 [ 55.492260] PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver [ 55.492382] PCI: Probing PCI hardware [ 55.492392] PCI: Probing PCI hardware (bus 00) [ 55.492811] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 [ 55.492938] PCI quirk: region f800-f83f claimed by PIIX4 ACPI [ 55.492948] PCI quirk: region fc00-fc0f claimed by PIIX4 SMB [ 55.493128] Boot video device is 0000:01:00.0 [ 55.494116] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:14.0 [ 55.494150] PCI: Cannot allocate resource region 0 of device 0000:00:00.0 [ 55.637397] pnp: 00:12: ioport range 0x15c-0x15d has been reserved [ 55.637407] pnp: 00:12: ioport range 0x4d0-0x4d1 has been reserved [ 55.637424] pnp: 00:13: ioport range 0xf800-0xf81f has been reserved [ 55.637433] pnp: 00:13: ioport range 0xf820-0xf83f has been reserved [ 55.637443] pnp: 00:13: ioport range 0xfc00-0xfc0f has been reserved [ 55.638077] PCI: Bridge: 0000:00:01.0 [ 55.638086] IO window: 1000-1fff [ 55.638097] MEM window: 40000000-410fffff [ 55.638106] PREFETCH window: 20000000-200fffff [ 55.638192] NET: Registered protocol family 2 [ 55.667107] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 55.667378] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 55.667602] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 55.667719] TCP: Hash tables configured (established 8192 bind 4096) [ 55.667728] TCP reno registered [ 55.669625] audit: initializing netlink socket (disabled) [ 55.669661] audit(1165564228.912:1): initialized [ 55.670049] VFS: Disk quotas dquot_6.5.1 [ 55.670115] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 55.670269] Initializing Cryptographic API [ 55.670282] io scheduler noop registered [ 55.670302] io scheduler anticipatory registered [ 55.670320] io scheduler deadline registered [ 55.670360] io scheduler cfq registered (default) [ 55.670374] Limiting direct PCI/PCI transfers. [ 55.670982] isapnp: Scanning for PnP cards... [ 56.025156] isapnp: No Plug & Play device found [ 56.099008] Real Time Clock Driver v1.12ac [ 56.099178] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 56.101078] mice: PS/2 mouse device common for all mice [ 56.102895] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 56.103494] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 56.103507] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 56.103952] PNP: PS/2 Controller [PNP0303,PNP0f0e] at 0x60,0x64 irq 1,12 [ 56.105288] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 56.105362] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 56.105848] EISA: Probing bus 0 at eisa.0 [ 56.105868] Cannot allocate resource for EISA slot 1 [ 56.105875] Cannot allocate resource for EISA slot 2 [ 56.105916] EISA: Detected 0 cards. [ 56.106605] TCP bic registered [ 56.106633] NET: Registered protocol family 1 [ 56.106654] NET: Registered protocol family 8 [ 56.106661] NET: Registered protocol family 20 [ 56.106727] Using IPI No-Shortcut mode [ 56.107885] Freeing unused kernel memory: 308k freed [ 56.149460] input: AT Translated Set 2 keyboard as /class/input/input0 [ 57.388137] Capability LSM initialized [ 58.661990] PIIX4: IDE controller at PCI slot 0000:00:14.1 [ 58.662021] PIIX4: chipset revision 1 [ 58.662029] PIIX4: not 100% native mode: will probe irqs later [ 58.662046] ide0: BM-DMA at 0x2020-0x2027, BIOS settings: hda:DMA, hdb:pio [ 58.662070] ide1: BM-DMA at 0x2028-0x202f, BIOS settings: hdc:pio, hdd:DMA [ 58.662090] Probing IDE interface ide0... [ 58.948671] hda: ST320014A, ATA DISK drive [ 59.653240] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 59.653767] Probing IDE interface ide1... [ 60.667519] hdd: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive [ 60.723600] ide1 at 0x170-0x177,0x376 on irq 15 [ 60.742247] hda: max request size: 128KiB [ 60.768717] hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(33) [ 60.801691] hda: cache flushes supported [ 60.801803] hda: hda1 hda2 < hda5 hda6 hda7 > hda3 [ 60.938867] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 60.938894] Uniform CD-ROM driver Revision: 3.20 [ 61.438460] usbcore: registered new driver usbfs [ 61.438519] usbcore: registered new driver hub [ 61.442427] USB Universal Host Controller Interface driver v3.0 [ 61.442529] PCI: Found IRQ 11 for device 0000:00:14.2 [ 61.442566] uhci_hcd 0000:00:14.2: UHCI Host Controller [ 61.442851] uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1 [ 61.442897] uhci_hcd 0000:00:14.2: irq 11, io base 0x00002000 [ 61.443131] usb usb1: configuration #1 chosen from 1 choice [ 61.443202] hub 1-0:1.0: USB hub found [ 61.443226] hub 1-0:1.0: 2 ports detected [ 61.639736] Attempting manual resume [ 61.733073] kjournald starting. Commit interval 5 seconds [ 61.733106] EXT3-fs: mounted filesystem with ordered data mode. [ 76.686910] Floppy drive(s): fd0 is 1.44M [ 76.701558] FDC 0 is a National Semiconductor PC87306 [ 77.217287] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 77.227869] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 77.311056] 8139too Fast Ethernet driver 0.9.27 [ 77.314168] PCI: Found IRQ 11 for device 0000:00:0f.0 [ 77.317608] eth0: RealTek RTL8139 at 0xd0852000, 00:0a:eb:49:8b:3d, IRQ 11 [ 77.317618] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 77.365027] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [ 78.688956] input: PC Speaker as /class/input/input1 [ 78.937486] Linux agpgart interface v0.101 (c) Dave Jones [ 79.089418] agpgart: Detected an Intel 440BX Chipset. [ 79.143634] agpgart: AGP aperture is 256M @ 0x30000000 [ 79.307475] piix4_smbus 0000:00:14.3: Found 0000:00:14.3 device [ 79.608633] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2 [ 79.695503] ts: Compaq touchscreen protocol output [ 79.950397] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 80.777710] NET: Registered protocol family 10 [ 80.777985] lo: Disabled Privacy Extensions [ 80.778370] IPv6 over IPv4 tunneling driver [ 80.939267] lp: driver loaded but no devices found [ 81.023509] Adding 2812280k swap on /dev/disk/by-uuid/da688492-cc79-47c6-b407-b8b4b8116ddc. Priority:-1 extents:1 across:2812280k [ 81.186627] EXT3 FS on hda1, internal journal [ 81.731567] kjournald starting. Commit interval 5 seconds [ 81.758103] EXT3 FS on hda3, internal journal [ 81.758117] EXT3-fs: mounted filesystem with ordered data mode. [ 81.785007] kjournald starting. Commit interval 5 seconds [ 81.792363] EXT3 FS on hda6, internal journal [ 81.792377] EXT3-fs: mounted filesystem with ordered data mode. [ 85.199816] NET: Registered protocol family 17 [ 90.961430] eth0: no IPv6 routers present [ 96.884262] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 107.142622] Bluetooth: Core ver 2.8 [ 107.142639] NET: Registered protocol family 31 [ 107.142645] Bluetooth: HCI device and connection manager initialized [ 107.142679] Bluetooth: HCI socket layer initialized [ 107.191643] Bluetooth: L2CAP ver 2.8 [ 107.191656] Bluetooth: L2CAP socket layer initialized [ 107.254007] Bluetooth: RFCOMM socket layer initialized [ 107.254043] Bluetooth: RFCOMM TTY layer initialized [ 107.254050] Bluetooth: RFCOMM ver 1.7
      • Re: detekcia a konfigurácia zvukovej karty 08.12.2006 | 13:45
        kvaso   Návštevník
        Určite tam je zvuková karta? Z výpisu lspci sa zdá že tam vôbec nie je.
        • Re: Re: detekcia a konfigurácia zvukovej karty 08.12.2006 | 13:52
          Avatar jamira ubuntu ee 6.10  Používateľ
          vo windows xp zvuk neboli so zvukom problemy v linuxe som skúšala vo viacerých distribúciach alsaconf,sndconfig,isapnp bez úspechu som úplny začiatočník a už neviem ako na to
        • Re: Re: detekcia a konfigurácia zvukovej karty 08.12.2006 | 13:52
          WlaSaTy   Návštevník
          ak ano, tak isa legacy. no pnp detected. ak nepomohol alsaconfig, tak: --srobovak, papier a pero. opisat co je na nej napisane ked uz zmizli papiere od pocitaca v blbinach casu.
          • Re: Re: Re: detekcia a konfigurácia zvukovej karty 08.12.2006 | 14:41
            Avatar jamira ubuntu ee 6.10  Používateľ
            nepomohol ,na šrobovak sa neodvážim škoda ,takú nádej som vkladala do linuxu ďakujem za čas a ochotu pomôcť
            • Re: Re: Re: Re: detekcia a konfigurácia zvukovej k 08.12.2006 | 15:00
              WlaSaTy   Návštevník
              pokial operacny system nevie zistit informacie o karte, tak ich nezisti pokial mu ich nepovies. v tomto pripade je jedno ci sa jedna o linux, bsd, mac os (x), solaris alebo hoci aj windows. smolka, skus poziadat nejakeho kamarata ci ti to neurobi, teda ci sa nepozre na tu zvukovu kartu. mozno ma na sebe prepojku ktorou ju prepnes z legacy do pnp modu a to sa uz potom da bez velkych problemov rozchodit.
              • Re: Re: Re: Re: Re: detekcia a konfigurácia zvukov 19.12.2006 | 16:47
                Avatar jamira ubuntu ee 6.10  Používateľ
                vo windows som o zvukovke zistila : ess audiodrive ES 1869 plug and play audioDrive (WDM) zvukový radič VIA AC 97 (WDM) Win sa tiež tváril,že zvukovej karty niet...podaril sa mi zvuk obnoviť.. v Ubuntu sa mi zatiať nepodarilo so zvukom pohnúť... Vďaka za každú dobrú radu
                • Re: Re: Re: Re: Re: Re: detekcia a konfigurácia zv 19.12.2006 | 17:18
                  Avatar jamira ubuntu ee 6.10  Používateľ
                  vyriešené...pomohol príkaz : sudo modprobe snd-es1688
                • Re: Re: Re: Re: Re: Re: detekcia a konfigurácia zv 19.12.2006 | 17:38
                  WlaSaTy   Návštevník
                  no, bud tam je zvukovy kodek ac97 (intel pouzivany aj ako via) o com pochybujem, alebo ess 1869. este je mozne ze tam dali ako bolo v casoch dosiek BX zvukovku cmi8330 skus pozriet co spravi: modprobe -v snd-es18xx dmesg | tail -30 popripade: modprobe -v snd-cmipci dmesg | tail -30 alebo: modprobe -v snd-cmi8330 dmesg | tail -30 a ci sa potom nenakopne zvuk :)) nieco z toho by mohlo hadam fungovat. a za pokus by stalo dat parameter pri starte "lapic" a vyhodit "noacpi" i ked to tam nevidim alebo aj pridat "acpi=force". predsa len dosky Intel 440BX mali tuto podporu relativne bezproblemovu, dost dlho sa pouzivali ako znackove dosky do lacnych serverov takze podpora linuxu si dala zalezat. ak by sa po tychto zmenach nahodou vyskytol problem ze sa pocitac sam nevypne ale ostane visiet na hlaske "power down", tak sa ozvi. mimochodom, grafika ATI Rage by asi isla lepsie s inymi ovladacmi, vtedy sa da dosiahnut aj aka - taka 3d akceleracia (ak sa nemylim: xwindows s "r128" a konzola s parametrom pre boot napriklad "video=atyfb:1024x768-8@60" popripade s inym rozlisenim-farebnou_hlbkou@frekvenciou. ale to len tak strielam. podobne dosky som mal dve, jednu som uz vymenil za par drinkov a druha mi hnije v file serveri. podobnu grafiku mam onboard na jednom stroji ktory sa mi ale nechce zapinat, zere vela eletriky a je hlucny. ps.: pocitac je to relativne do pohody, pIII 650Mhz, 1/4Gb RAM, AGP 2, disk seagate 20Gb s 2Mb cache len ten radic diskov asi nebude vediet robit rychlejsie ako s DMA33 (cca 10-15MBps), sietovka bezproblemova rtl1839 ale jedno mi vrta hlavou. bluetooth je v USB alebo sa jedna o stary managersky laptop? vypis z dmesg (pocet slotov) hovori o tom ze sa jedna o normalny pocitac kde zvykli byt zvukovky cmi ale ten BT naznacuje aj s vypisom z wirdosu ze sa moze jednat aj o notebook :)
                  • Re: Re: Re: Re: Re: Re: Re: detekcia a konfiguráci 20.12.2006 | 23:31
                    Avatar jamira ubuntu ee 6.10  Používateľ
                    ja som takmer analfabet,čo sa počítačov týka ,takže ťažko odo mňa získať nejaké informácie nie je to notebook...je to compaq deskpro en,taka mohutná opacha,starší kúpený z druhej ruky,takže dokumentácia a info o internom vybavení chýbala... čo sa toho zvuku týka,ešte hapruje pri prehrávaní dvd filmov...pri audio cd aj mp3 nie je problém aj v avi ide zvuk ale v dvd aj obraz seká ...ale to už asi bude chyba v kodekoch alebo nejakých pluginoch,či nie?
                    • Re: Re: Re: Re: Re: Re: Re: Re: detekcia a konfigu 21.12.2006 | 00:19
                      Avatar uid0 Debian  Používateľ
                      ten problem s filmami moze sposobovat pomalost procesoru. ak prehravac vykonava nejaku interpolaciu obrazu, tak by tie symptomy mohli sediet (moj odhad) na rychlost toho procesoru...
                      Debian. apt-get into it…