ked zadam prikaz
/etc/init.d/alsasound start tak mi vyhodi chybu * Loading ALSA modules ...
* Loading: snd-card-0 ...
FATAL: Error inserting snd_hda_intel (/lib/modules/2.6.20-gentoo-r8/alsa-driver/pci/hda/snd-hda-intel.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ !! ]
* Loading: snd-seq-oss ... [ ok ]
* Loading: snd-mixer-oss ... [ ok ]
* Loading: snd-pcm-oss ... [ ok ]
* ERROR: Failed to load necessary drivers [ ok ]
* Restoring Mixer Levels ...
alsactl: unrecognized option `---'
Usage: alsactl <options> command
Available options:
-h,--help this help
-f,--file # configuration file (default /etc/asound.state or /etc/asound.names)
-F,--force try to restore the matching controls as much as possible
-d,--debug debug mode
-v,--version print version of this program
Available commands:
store <card #> save current driver setup for one or each soundcards
to configuration file
restore<card #> load current driver setup for one or each soundcards
from configuration file
* Errors while restoring defaults, ignoring [ ok ]
vypis lspci | grep -i audio00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
/etc/modules.d/alsa# Alsa kernel modules' configuration file.
# ALSA portion
# OSS/Free portion
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
## OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
## OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
# Set this to the correct number of cards.
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.14rc2 ---
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. ---
Mohol by mi niekto poradit ako to rozbehat???
bo je dost obsiahli a tebe staci zapnut podporu v kerneli, prekompilovat a prekopcit ho do /boot + emerge alsa-driver + alsaconf (tu len odklikas sprievodcu) +rc-update add alsasound boot (pridanie do rc aby sa spustal automaticky)
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
options snd-hda-intel enable=1 index=0 single_cmd=1 model=3stack
alias char-major-116 snd
alias char-major-15 soundcore
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
* Loading ALSA modules ...
tak neviem co dalej* Loading: snd-card-0 ...
FATAL: Error inserting snd_hda_intel (/lib/modules/2.6.20-gentoo-r8/alsa-driver/pci/hda/snd-hda-intel.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ !! ]
* Loading: snd-seq-oss ... [ ok ]
* Loading: snd-mixer-oss ... [ ok ]
* Loading: snd-pcm-oss ... [ ok ]
* ERROR: Failed to load necessary drivers [ ok ]
* Restoring Mixer Levels ...
alsactl: unrecognized option `---'
Usage: alsactl <options> command
Available options:
-h,--help this help
-f,--file # configuration file (default /etc/asound.state or /etc/asound.names)
-F,--force try to restore the matching controls as much as possible
-d,--debug debug mode
-v,--version print version of this program
Available commands:
store <card #> save current driver setup for one or each soundcards
to configuration file
restore<card #> load current driver setup for one or each soundcards
from configuration file
* Errors while restoring defaults, ignoring
BTW Gentoo mi akosi zacalo vadit, koli takymto blbostiam. V binarnych distribuciach bezi vsetok moj HW skoro out-of-box.
make menuconfig
make && make modules_install
cp arch/i386/boot/bzImage /boot/bzImage
ak si dobre spominam ;)
ak si nahodou niekedy instaloval alsa-driver tak musis manualne odstranit ten folder kde sa nachadzaju. klasicke emerge -C nestaci. tieto dve veci nemozes mat na jednom systeme.
v gentoo wiki o tom je nieco napisane myslim
Inac som to este nerozbehal vypada to tak ako keby som mal vsetko muted
lebo ked som mainstaloval arts tak mi Control center prestal vyhadzovat chiby a dal mi na vyber aj audio drivices ale stale nic nepocujem tak som z toho ...
pridavam aj to co mi alsamixer vypisuje ale v gui tu je link Tka teraz som s toho jelen ale vsetko je naplno tie ostatne veci sa nedaju pridat !!!
Ale amarok mi stale vypisuje
xine was unable to initialize any audio driversalsaconfnapis co ti to po skonceni konfigurovania vypiseRunning modules-update...
po skonceni mi vypisuje* Please run 'update-modules' from now on; 'modules-update' is going away
* Warning: the current /etc/modprobe.conf has not been automatically generated
* Use "update-modules force" to force (re)generation
Loading driver...
* Loading ALSA modules ...
* Loading: snd-card-0 ...
===============================================================================
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
Have a lot of fun!
cize update-modules force spusti ako root.
potom skus restartnut alsu, pripadne znovu tennto config spustit.
potom spusti z konzoly alsamixer a skus vsetko kde mas mapisane MM unmute-nut (stlacis M) potom skus zvuk (ak si este blbne amarok tak skus mplayerom nejaku mp3 pustit.) ak ti vsetko pojde tak este nezabudni das
alsactl storeako root. to ti zapamata nastavenia/etc/init.d/alsasound start --verbose?gentoo ~ # /etc/init.d/alsasound start --verboseale stale nic* Loading ALSA modules ...
* Loading: snd-card-0 ... [ ok ]
* Loading: snd-card-0 ... [ ok ]
* Loading: snd-seq-oss ... [ ok ]
* Loading: snd-mixer-oss ... [ ok ]
* Loading: snd-pcm-oss ... [ ok ]
* Restoring Mixer Levels ...
XXX write TLV... [ ok ]
cat /dev/urandom > /dev/dsp, na inej konzolealsamixer, skusat menit hlasitosti, zapinat kanaly (tlacitko M)VDAKA VSETKYM ZPOMOC
Inac som to este nerozbehal vypada to tak ako keby som mal vsetko muted
lebo ked som mainstaloval arts tak mi Control center prestal vyhadzovat chiby a dal mi na vyber aj audio drivices ale stale nic nepocujem tak som z toho ...
pridavam aj to co mi alsamixer vypisuje ale v gui tu je link Tka teraz som s toho jelen ale vsetko je naplno tie ostatne veci sa nedaju pridat !!!
Ale amarok mi stale vypisuje
xine was unable to initialize any audio driversa este a tu je mixer