Pridať komentár

Príspevok, na ktorý odpovedáte

Re: HDD vypinanie a zapinanie 31.03.2010 | 15:41
Avatar partizan Arch  Používateľ
Je to jednoznacne hdparm nastavenim, je tiez dost otazne co ti takto disk nastavy.
Ale inac si to vies nastavit hdparm -S 12 /dev/sdx

-S Put the drive into idle (low-power) mode, and also set the standby (spindown) timeout for the drive. This timeout value is used by the drive to determine how long to wait (with no disk activity) before turning off the spindle motor to save power. Under such circumstances, the drive may take as long as 30 seconds to respond to a subsequent disk access, though most drives are much quicker. The encoding of the timeout value is somewhat peculiar. A value of zero means "timeouts are disabled": the device will not automatically enter standby mode. Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes. Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to 5.5 hours. A value of 252 signifies a timeout of 21 minutes. A value of 253 sets a vendor defined timeout period between 8 and 12 hours, and the value 254 is reserved. 255 is interpreted as 21 minutes plus 15 seconds. Note that some older drives may have very different interpretations of these values.
Arch & Metal
7 * 9 plus tisíc (číslom)

Maximálna veľkosť je: 2,0 MB