Zdravim mam problem z rozbehanim multifunkcneho zariadenia Epson DX4400 na Slackware linuxe. Stiahol som si drivery z oficialnej stranky kde ich ponukaju, spustil /usr/local/EPAva/core/setup:
Please select locale to use.
Select : en ja
(english) > en
It starts to set up of Photo Image Print System.
If this product does not set up, it does not operate correctly.
Please specify the connection of a printer.
() > /dev/usblp0
Please specify the printer name when it is using by lpr.
() > lite
Setup is complete. Is it saved?
(Yes/no) > Yes
The following files were changed.
/etc/ekpdrc
/etc/printcap
The following directories were created.
/var/spool/lpd/lite
It saved.
Start /usr/local/EPAva/core/setup to change setup.
PIPS Error: : Printer not found.
Please specify the connection of a printer.
Co je trochu divne lebo lsusb:bash-3.1# lsusb
Bus 5 Device 1: ID 0000:0000
Bus 3 Device 1: ID 0000:0000
Bus 1 Device 4: ID 18a5:0214
Bus 1 Device 1: ID 0000:0000
Bus 4 Device 3: ID 04b8:083f Seiko Epson Corp.
Bus 4 Device 1: ID 0000:0000
Bus 2 Device 3: ID 0c45:6007 Microdia
Bus 2 Device 2: ID 04d9:0499 Holtek Semiconductor, Inc.
Bus 2 Device 1: ID 0000:0000
ten ju nasiel takze ak mate niekto skusenosti tak prosim poradte.
(rovnaky vysledok aj pri /dev/usb/lp0)
Tlaciaren sa mi potom podarilo ako tak rozbehat s pomocou cups-u a gutenprintu ale pouziva to ovladac na nejaku inu, podobnu a to nie je prilis dobre lebo potom kym sa spameta a nabehne vo windowse trva to a aj tlac je dost rozhadzana.
Skener nejde xsane pise ze nic nenasiel.
Epson a Slackware
Sekcia: Aplikácie & Desktop
25.12.2008 | 22:08
jozef
Návštevník
Pre pridávanie komentárov sa musíte prihlásiť.
-
-
Re: Epson a Slackware 30.12.2008 | 21:36
zeleno
MX Linux
Používateľ
Skener ide cez program "iscan", skús ho doinštalovať z repozitárov, alebo stiahni rpm z http://slackbuilds.org/repository/12.2/misc/iscan-firmware/
-
