druhy odkaz jasne hovori ze nemas 3d akceleraciu nainstalovanu (teda driver pre grafiku) alebo povolenu skus vyriesit najprv to, potom podla mna rozchodis aj tu druhu chybu
aku mas grafiku ??
ake fps ti da: glxgears ??
co napise: glxinfo | grep direct ??
Linux: the operating system with a CLUE... Command Line User Environment
Vraví sama za seba.
Ako je nastavený xorg.conf v časti o drivery grafike?
Bol po inštalácií ati driveru, použitý príkaz aticonfig --initial?
Stiahni driver pre ati, nainštaluj, spusť príkaz a všetko musí fungovať. Samozrejme vopred si prezri aké balíčky potrebuješ pre úspešnu inštaláciu ati driverov. Ale myslím že len kernel-source, a make a tak...
Poprípade vlož výpis príkazu grep fglrx /var/log/Xorg.0.log sem. Ak nič nevypľuje, Catalist driver nepracuje.
samo@samo-laptop:~$ aticonfig --initial
Data incomplete in file /etc/X11/xorg.conf
Device section "Configured Video Device" must have a Driver line.
aticonfig: Parsing the configuration file failed.
The above error messages are reported from XFree86 and may assist you in
diagnosing the problem with your configuration input file. Try use -f option
to generate a new configuration file.
Všetko to tu ber len informatívne, lebo sa nikam nepohneme.
Nič nerob. Ak máš stiahnutý driver ATI od Catalistu. SPusti konzolu, vojdi do priečinka kde je súbor uložený a spusti pod právami root-a príkaz: ./ati_sem_dopis_meno_suboru a intuitívne klikaj na pokračovať. Po ohlásení skončenia inštalácie, spusti príkaz aticonfig --initial a reštart PC.
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
neviem ci vobec moja graf karta X200 ma v linuxe 3D rozbehane
samo@samo-laptop:~$ lspci | grep ATI
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
samo@samo-laptop:~$ glxinfo | grep direct
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
OpenGL renderer string: Mesa GLX Indirect
samo@samo-laptop:~$
aku mas grafiku ??
ake fps ti da:
glxgears??co napise:
glxinfo | grep direct??3235 frames in 5.0 seconds = 645.050 FPS
4220 frames in 5.0 seconds = 843.356 FPS
3800 frames in 5.0 seconds = 759.086 FPS
5240 frames in 5.0 seconds = 1044.196 FPS
4360 frames in 5.0 seconds = 871.145 FPS
samo@samo-laptop:~$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group,
GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.3-rc2)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program,
GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite,
GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements,
GL_EXT_fog_coord, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias,
GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_draw_buffers, GL_ATI_texture_env_combine3,
GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3,
GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square,
GL_NV_fragment_program, GL_NV_light_max_exponent, GL_NV_point_sprite,
GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x4e 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
takze mas buz zly alebo nefunkcny driver alebo to na tej grafike proste nie je mozne to uz ti neporadim, ja tam mam vzdy YES
Cast:
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
Vraví sama za seba.
Ako je nastavený xorg.conf v časti o drivery grafike?
Bol po inštalácií ati driveru, použitý príkaz aticonfig --initial?
Stiahni driver pre ati, nainštaluj, spusť príkaz a všetko musí fungovať. Samozrejme vopred si prezri aké balíčky potrebuješ pre úspešnu inštaláciu ati driverov. Ale myslím že len kernel-source, a make a tak...
Poprípade vlož výpis príkazu grep fglrx /var/log/Xorg.0.log sem. Ak nič nevypľuje, Catalist driver nepracuje.
S pozdravom
bash: xorg.conf: príkaz nenájdený
Data incomplete in file /etc/X11/xorg.conf
Device section "Configured Video Device" must have a Driver line.
aticonfig: Parsing the configuration file failed.
The above error messages are reported from XFree86 and may assist you in
diagnosing the problem with your configuration input file. Try use -f option
to generate a new configuration file.
Kedže si nahodil jadro nanovo. Reinštaluj ovládač. Týmto je to celé spôsobené. A na to vždy pamätaj.
Balík linux-headers je virtuálny balík poskytovaný:
linux-headers-2.6.24-24-xen 2.6.24-24.53
linux-headers-2.6.24-24-virtual 2.6.24-24.53
linux-headers-2.6.24-24-server 2.6.24-24.53
linux-headers-2.6.24-24-rt 2.6.24-24.53
linux-headers-2.6.24-24-openvz 2.6.24-24.53
linux-headers-2.6.24-24-generic 2.6.24-24.53
linux-headers-2.6.24-24-386 2.6.24-24.53
linux-headers-2.6.24-24 2.6.24-24.53
linux-headers-2.6.24-23-xen 2.6.24-23.52
linux-headers-2.6.24-23-virtual 2.6.24-23.52
linux-headers-2.6.24-23-server 2.6.24-23.52
linux-headers-2.6.24-23-rt 2.6.24-23.52
linux-headers-2.6.24-23-openvz 2.6.24-23.52
linux-headers-2.6.24-23-generic 2.6.24-23.52
linux-headers-2.6.24-23-386 2.6.24-23.52
linux-headers-2.6.24-23 2.6.24-23.52
linux-headers-2.6.24-22-xen 2.6.24-22.45
linux-headers-2.6.24-22-virtual 2.6.24-22.45
linux-headers-2.6.24-22-server 2.6.24-22.45
linux-headers-2.6.24-22-rt 2.6.24-22.45
linux-headers-2.6.24-22-openvz 2.6.24-22.45
linux-headers-2.6.24-22-generic 2.6.24-22.45
linux-headers-2.6.24-22-386 2.6.24-22.45
linux-headers-2.6.24-22 2.6.24-22.45
linux-headers-2.6.24-21-xen 2.6.24-21.43
linux-headers-2.6.24-21-virtual 2.6.24-21.43
linux-headers-2.6.24-21-server 2.6.24-21.43
linux-headers-2.6.24-21-rt 2.6.24-21.43
linux-headers-2.6.24-21-openvz 2.6.24-21.43
linux-headers-2.6.24-21-generic 2.6.24-21.43
linux-headers-2.6.24-21-386 2.6.24-21.43
linux-headers-2.6.24-21 2.6.24-21.43
linux-headers-2.6.24-19-xen 2.6.24-19.41
linux-headers-2.6.24-19-virtual 2.6.24-19.41
linux-headers-2.6.24-19-server 2.6.24-19.41
linux-headers-2.6.24-19-rt 2.6.24-19.41
linux-headers-2.6.24-19-openvz 2.6.24-19.41
linux-headers-2.6.24-19-generic 2.6.24-19.41
linux-headers-2.6.24-19-386 2.6.24-19.41
linux-headers-2.6.24-19 2.6.24-19.41
linux-headers-2.6.24-18-xen 2.6.24-18.32
linux-headers-2.6.24-18-virtual 2.6.24-18.32
linux-headers-2.6.24-18-server 2.6.24-18.32
linux-headers-2.6.24-18-rt 2.6.24-18.32
linux-headers-2.6.24-18-openvz 2.6.24-18.32
linux-headers-2.6.24-18-generic 2.6.24-18.32
linux-headers-2.6.24-18-386 2.6.24-18.32
linux-headers-2.6.24-18 2.6.24-18.32
linux-headers-2.6.24-16-xen 2.6.24-16.30
linux-headers-2.6.24-16-virtual 2.6.24-16.30
linux-headers-2.6.24-16-server 2.6.24-16.30
linux-headers-2.6.24-16-rt 2.6.24-16.30
linux-headers-2.6.24-16-openvz 2.6.24-16.30
linux-headers-2.6.24-16-generic 2.6.24-16.30
linux-headers-2.6.24-16-386 2.6.24-16.30
linux-headers-2.6.24-16 2.6.24-16.30
Mali by ste explicitne vybrať jeden na inštaláciu.
E: Balík linux-headers nemá kandidáta na inštaláciu
root@samo-laptop:~#
co si mam vybrat mam 2.6.30 a ono to pise 2.6.24
Nič nerob. Ak máš stiahnutý driver ATI od Catalistu. SPusti konzolu, vojdi do priečinka kde je súbor uložený a spusti pod právami root-a príkaz: ./ati_sem_dopis_meno_suboru a intuitívne klikaj na pokračovať. Po ohlásení skončenia inštalácie, spusti príkaz aticonfig --initial a reštart PC.
xorg.conf je konfiguračný súbor pre nastavenie grafiky a podobne.
Nachádza sa v /etc
Jeho presne znenie je /etc/xorg.conf
pre výpis teda dáš: cat /etc/xorg.conf
samo@samo-laptop:~$ cat /etc/xorg.conf
cat: /etc/xorg.conf: No such file or directory
a co si mam vybrat pri tej instelaci?
cat /etc/X11/xorg.conf
ale potrebujem vediet co pri tej instelaci mam vybrat ked mam kernel 2.6.30
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "sk"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSection
Video driver for ATI graphics accelerators
Video driver for the ATI Radeon and FireGL graphics accelerators.
This version of the ATI driver officially supports:
* FireGL: V8650, V8600, V7600, V7350, V7300, V7200, V7100, V5600, V5200, V5100, V5000, HD3870, HD3850, V3600, V3400, V3300, V3200, V3100, X3-256, X3, X2-256, Z1-128, T2-128, X1-128, X1-256p
* FireMV: 2200 (Single card PCI-e configuration)
* Mobility FireGL: V5000, T2
* Mobility Radeon: X1800, X1600, X1400, X1300, X800, X700, X600, X300, X200, 9800, 9600, 9550, 9500
* Radeon Xpress: 1200 series, 1100 series, 200 series
* Radeon: HD2900, HD2600, HD2400, X1900, X1800, X1600, X1300, X850, X800, X700, X600, X550, X300, 9800, 9700, 9600, 9550, 9500
ATI All-in-Wonder variants of the above cards/chips are also supported, but video capture is not.
This package provides 2D display drivers and hardware accelerated OpenGL.
Nieje to nahodou tak ze ten ati driver podporuje len 2D ked vid visie 2D...?
neviem ci vobec moja graf karta X200 ma v linuxe 3D rozbehane
samo@samo-laptop:~$ lspci | grep ATI
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.3-rc2)
samo@samo-laptop:~$ glxinfo | grep direct
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
OpenGL renderer string: Mesa GLX Indirect
samo@samo-laptop:~$