hauppauge wintv hvr-1200 a tvtime

Sekcia: Aplikácie & Desktop 23.10.2009 | 19:17
Avatar matesp   Používateľ
mam v titulku spominanu tv kartu a chcel som pozerat tv cez tiez hore spomenuty program
hold problem v tvtime mi vypisuje
no signal
no such file or directory
cannot open capture device /dev/video0
takze som zacal hladat po webe nejake riesenie no nepodarilo sa mi myslel som tiez ci nie je problem s tv kartou ale ako uplny zaciatocnik som s toho pako ale dam sem vypis z dmesg a lspci
dmesg
[ 11.085548] Linux video capture interface: v2.00
[ 11.115210] cx23885 driver version 0.0.1 loaded
[ 11.115602] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 11.115608] cx23885 0000:04:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 11.115773] CORE cx23885[0]: subsystem: 0070:71d3, board: Hauppauge WinTV-HVR1200 [card=7,autodetected]
[ 11.125540] usb 2-4: reset full speed USB device using ohci_hcd and address 4
[ 11.282727] tveeprom 2-0050: Hauppauge model 71949, rev H2E9, serial# 3004168
[ 11.282732] tveeprom 2-0050: MAC address is 00-0D-FE-2D-D7-08
[ 11.282734] tveeprom 2-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
[ 11.282738] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 11.282740] tveeprom 2-0050: audio processor is CX23885 (idx 39)
[ 11.282742] tveeprom 2-0050: decoder processor is CX23885 (idx 33)
[ 11.282744] tveeprom 2-0050: has no radio
[ 11.282746] cx23885[0]: hauppauge eeprom: model=71949
[ 11.282749] cx23885_dvb_register() allocating 1 frontend(s)
[ 11.284025] cx23885[0]: cx23885 based dvb card
lspci
04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
aspon podla toho co som cital po webe by to malo spolu suvisiet
mohol by mi teda niekto poradit co a ako aby mi to islo? zatial dik
    • Re: hauppauge wintv hvr-1200 a tvtime 23.10.2009 | 20:16
      WlaSaTy   Návštevník
      Hm, kartu to naslo (TV tunner, audio grabber a aj sietovka). Otazkou je ci sa v dnesnej dobe uz nevola subor reprezentujuci TV uz nejako inak.

      lsmod
      find /dev -ls | grep video
      mount | grep dev
      • Re: hauppauge wintv hvr-1200 a tvtime 24.10.2009 | 02:28
        Avatar matesp   Používateľ
        tak prikladam
        • Re: hauppauge wintv hvr-1200 a tvtime 24.10.2009 | 02:33
          Avatar matesp   Používateľ
          hups
          matesp@matesp-desktop:~$ lsmod
          Module Size Used by
          binfmt_misc 16776 1
          ppdev 15620 0
          bridge 56212 0
          stp 10500 1 bridge
          bnep 20224 2
          input_polldev 11912 0
          video 25872 0
          output 11008 1 video
          lp 17156 0
          parport 42220 2 ppdev,lp
          arc4 9856 2
          ecb 10752 2
          snd_hda_intel 435252 3
          snd_pcm_oss 46336 0
          snd_mixer_oss 22656 1 snd_pcm_oss
          snd_pcm 83076 2 snd_hda_intel,snd_pcm_oss
          tda18271 43144 1
          snd_seq_dummy 10756 0
          snd_seq_oss 37760 0
          snd_seq_midi 14336 0
          snd_rawmidi 29696 1 snd_seq_midi
          tda8290 20740 1
          rt73usb 33412 0
          crc_itu_t 10112 1 rt73usb
          snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
          tda10048 16772 1
          rt2x00usb 18688 1 rt73usb
          rt2x00lib 37888 2 rt73usb,rt2x00usb
          snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
          snd_timer 29704 2 snd_pcm,snd_seq
          snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
          cx23885 94244 0
          snd 62756 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
          led_class 12036 1 rt2x00lib
          nvidia 7233756 36
          videodev 41600 1 cx23885
          v4l1_compat 21764 1 videodev
          compat_ioctl32 9344 1 cx23885
          cx2341x 20996 1 cx23885
          soundcore 15200 1 snd
          mac80211 217592 2 rt2x00usb,rt2x00lib
          i2c_nforce2 14980 0
          agpgart 42696 1 nvidia
          videobuf_dma_sg 20484 1 cx23885
          videobuf_dvb 15236 1 cx23885
          dvb_core 92032 1 videobuf_dvb
          snd_page_alloc 16904 2 snd_hda_intel,snd_pcm
          pcspkr 10496 0
          psmouse 61972 0
          usblp 20224 0
          usb_storage 99648 1
          usbhid 42336 0
          videobuf_core 26500 3 cx23885,videobuf_dma_sg,videobuf_dvb
          v4l2_common 20992 2 cx23885,cx2341x
          serio_raw 13444 0
          cfg80211 38288 2 rt2x00lib,mac80211
          btcx_risc 13064 1 cx23885
          tveeprom 20100 1 cx23885
          lirc_mceusb2 20100 0
          lirc_dev 19892 1 lirc_mceusb2
          ohci1394 38576 0
          ieee1394 94660 1 ohci1394
          forcedeth 61712 0
          fbcon 46112 0
          tileblit 10752 1 fbcon
          font 16384 1 fbcon
          bitblit 13824 1 fbcon
          softcursor 9984 1 bitblit

          find /dev -ls | grep video
          5167 0 crw-rw---- 1 root video okt 24 00:00 /dev/dvb/adapter0/net0
          5158 0 crw-rw---- 1 root video okt 24 00:00 /dev/dvb/adapter0/dvr0
          5149 0 crw-rw---- 1 root video okt 24 00:00 /dev/dvb/adapter0/demux0
          5142 0 crw-rw---- 1 root video okt 24 00:00 /dev/dvb/adapter0/frontend0

          mount | grep dev
          /dev/sda6 on / type ext3 (rw,relatime,errors=remount-ro)
          proc on /proc type proc (rw,noexec,nosuid,nodev)
          sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
          varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
          udev on /dev type tmpfs (rw,mode=0755)
          tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
          devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
          binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
          gvfs-fuse-daemon on /home/matesp/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=matesp)
          /dev/sdb5 on /media/Externý M@tes type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)

          no je toho viac dufam ze ma nikto nezabije

          • Re: hauppauge wintv hvr-1200 a tvtime 24.10.2009 | 16:27
            WlaSaTy   Návštevník
            A co keby si nastavil v tvtime ze V4LDevice je napriklad /dev/dvb/adapter0/dvr0 ?
            • Re: hauppauge wintv hvr-1200 a tvtime 24.10.2009 | 22:10
              Avatar matesp   Používateľ
              skusil som aj tie zvysne a nic matesp@matesp-desktop:~$ tvtime --device=/dev/dvb/adapter0/dvr0
              Running tvtime 1.0.2.
              Reading configuration from /etc/tvtime/tvtime.xml
              Reading configuration from /home/matesp/.tvtime/tvtime.xml
              /home/matesp/.tvtime/stationlist.xml: No existing PAL station list "custom".
              videoinput: Cannot open capture device /dev/dvb/adapter0/dvr0: Operation not supported
              Thank you for using tvtime.

              matesp@matesp-desktop:~$ tvtime --device=/dev/dvb/adapter0/frontend0
              Running tvtime 1.0.2.
              Reading configuration from /etc/tvtime/tvtime.xml
              Reading configuration from /home/matesp/.tvtime/tvtime.xml
              /home/matesp/.tvtime/stationlist.xml: No existing PAL station list "custom".
              videoinput: /dev/dvb/adapter0/frontend0 is not a video4linux device.
              Thank you for using tvtime.
              matesp@matesp-desktop:~$ tvtime --device=/dev/dvb/adapter0/net0
              Running tvtime 1.0.2.
              Reading configuration from /etc/tvtime/tvtime.xml
              Reading configuration from /home/matesp/.tvtime/tvtime.xml
              /home/matesp/.tvtime/stationlist.xml: No existing PAL station list "custom".
              videoinput: /dev/dvb/adapter0/net0 is not a video4linux device.
              Thank you for using tvtime.
              matesp@matesp-desktop:~$ tvtime --device=/dev/dvb/adapter0/demux0
              Running tvtime 1.0.2.
              Reading configuration from /etc/tvtime/tvtime.xml
              Reading configuration from /home/matesp/.tvtime/tvtime.xml
              /home/matesp/.tvtime/stationlist.xml: No existing PAL station list "custom".
              videoinput: /dev/dvb/adapter0/demux0 is not a video4linux device.
              Thank you for using tvtime.
              ani tuk
              • Re: hauppauge wintv hvr-1200 a tvtime 24.10.2009 | 23:16
                WlaSaTy   Návštevník
                Ty, tak ma napadlo az teraz. To akoze TV Time odkedy vie prepinat kanale na DVB karte? Lebo bez toho sa T bude pozerat Telka dost blbo. Netvrdim ze to nejde, ale bude to nepohodlne.
                • Re: hauppauge wintv hvr-1200 a tvtime 25.10.2009 | 02:26
                  Avatar matesp   Používateľ
                  no jo digital tu aj tak nechytim a analog je onicom mne ide o to ze tv mam cez kablovku a chcel som nejaky program na pozeranie pripadne nahravanie
                  no a podla netu ak som nieco zle nepochopil vacsina pouziva tvtime
                  ja som skusal aj kaffein ten dokonca ladil ale ako hovorim digital tu nechytim

                  mne ide len oto ze ked mi to ide na viste v media centre tak preco by to nemohlo ist aj v ubuntu s nejakym programom

                  mozno by si mi mohol poradit ktory program by sa na nieco take hodil
                  zatial dik
                  • Re: hauppauge wintv hvr-1200 a tvtime 25.10.2009 | 02:50
                    WlaSaTy   Návštevník
                    gxine, kaffeine, ...

                    Inak, co mas za kablovku ze spristupnuju digital tymto sposobom? Normalne by mal byt cez DVB-C.