internet T-Com

http://linuxos.sk/zobraz_prispevok.php?forumid=48446

skus sa pripojit cez minicom na dane tel. cislo a pockaj si ci nemaju nejaku inu vyzvu ako Login: + Password: obcas to robilo problemy, najme pri napriklad gprs i ked to neslo cez telekom ale ohlasovalo sa to inac. a tak isto to robilo problemy aj pri nejakych mensich dialup poskytovateloch ktory si menili login screeny ako sa chcelo sluzbukonajucemu administratorovi. *1 inac ta informacia ze ta vita ST Online ISDN je len sprava ze si sa pripojil na digitalny okruh. ps.: predpokladam ze si spustil ako root wvdialconf a ten ti to predkonfiguroval. --- *1 nikde nie je dane ze sa do dialupu prihlasuju stroje cez vyzvu Login: a Password:, jedna sa iba o odporucanie :)

Ja som si teraz všimol, že wvdialconf vypisuje zlyhanie keď skúša rýchlosť modemu: ttyS0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud Môže to znamenať, že ovládač na modem nefunguje správne? Možno to je príčina môjho neúspechu. Tu je úplný výstup wvdialconf a za ním aj výstup wvdial. vendelin:/home/jelen# wvdialconf /etc/wvdial.conf Scanning your serial ports for a modem. Port Scan: Scanning ttyLT0 first, /dev/modem is a link to it. ttyLT0: ATQ0 V1 E1 -- OK ttyLT0: ATQ0 V1 E1 Z -- OK ttyLT0: ATQ0 V1 E1 S0=0 -- OK ttyLT0: ATQ0 V1 E1 S0=0 &C1 -- OK ttyLT0: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyLT0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyLT0: Modem Identifier: ATI -- LT V.92 Data+Fax Modem Version 8.31 ttyLT0: Speed 4800: AT -- OK ttyLT0: Speed 9600: AT -- OK ttyLT0: Speed 19200: AT -- OK ttyLT0: Speed 38400: AT -- OK ttyLT0: Speed 57600: AT -- OK ttyLT0: Speed 115200: AT -- OK ttyLT0: Max speed is 115200; that should be safe. ttyLT0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyS0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyS1: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1: ATQ0 V1 E1 -- and failed too at 115200, giving up. Port Scan: S2 S3 S4 ACM0 ACM1 ACM2 ACM3 ACM4 Port Scan: ACM5 ACM6 ACM7 ACM8 ACM9 ACM10 ACM11 ACM12 Port Scan: ACM13 ACM14 ACM15 USB0 USB1 USB2 USB3 USB4 Port Scan: USB5 USB6 USB7 USB8 USB9 USB10 USB11 USB12 Port Scan: USB13 USB14 USB15 Found a modem on /dev/ttyLT0, using link /dev/modem in config. Modem configuration written to /etc/wvdial.conf. ttyLT0: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" Teraz čo napísal wvdial: vendelin:/home/jelen# wvdial --> WvDial: Internet dialer version 1.54.0 --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: ATX3 ATX3 OK --> Modem initialized. --> Sending: ATDT01920 --> Waiting for carrier. ATDT01920 CONNECT 50666 V44 --> Carrier detected. Waiting for prompt. User Access Verification Welcome in ISDN ST_OnLine, Enter Your Username: --> Looks like a login prompt. --> Sending: internet internet Enter Your Access Password: --> Looks like a password prompt. --> Sending: (password) % Authentication failed Welcome in ISDN ST_OnLine, Enter Your Username: --> Looks like a login prompt. --> Sending: internet internet Enter Your Access Password: --> Looks like a password prompt. --> Sending: (password) % Authentication failed --> Don't know what to do! Starting pppd and hoping for the best. --> Starting pppd at Fri Dec 15 16:50:36 2006 --> pid of pppd: 1238 --> Using interface ppp0 --> pppd: ATX3 --> pppd: ATX3 --> pppd: ATX3 --> pppd: ATX3 --> Disconnecting at Fri Dec 15 16:50:44 2006 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information. --> Auto Reconnect will be attempted in 5 seconds --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Caught signal #2! Attempting to exit gracefully... ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: ATX3 ATX3 OK --> Modem initialized. --> Disconnecting at Fri Dec 15 16:50:46 2006 vendelin:/home/jelen#

Teraz som skúsil aj Gnome-ppp, aj to zo začiatku vyzeralo nádejne, lebo sa objavili číslice ukazujúce čas pripojenia, ale keď som si pustil Firefox a zadal adresu nejakej stránky, modem zložil. Nechápem tomu. Prosím pomôžte.