moj xorg.conf:
horizSync a VertRefresh som uz nastavil podla monitora no nemalo to ziadny efekt:(
Section "Monitor"
Identifier "monitor1"
VendorName "Acer"
ModelName "Acer AL1916W"
HorizSync 24-80
VertRefresh 56-60
# Monitor preferred modeline (56.0 Hz vsync, 55.6 kHz hsync, ratio 16/10)
ModeLine "1440x900" 89 1440 1488 1520 1600 900 903 909 926 +hsync +vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1440x900_100" 187.55 1440 1544 1704 1968 900 901 904 953 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1440x900_85" 156.79 1440 1536 1696 1952 900 901 904 945 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1440x900_75" 136.49 1440 1536 1688 1936 900 901 904 940 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1440x900_60" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1440x900_50" 87.41 1440 1512 1664 1888 900 901 904 926 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_120" 181.21 1280 1376 1520 1760 800 801 804 858 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_100" 147.89 1280 1376 1512 1744 800 801 804 848 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_85" 123.38 1280 1368 1504 1728 800 801 804 840 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_75" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_60" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_50" 68.56 1280 1336 1472 1664 800 801 804 824 -HSync +Vsync
EndSection
Section "Device"
Identifier "device1"
Driver "i810"
Option "DPMS"
Option "May_Need_ForceBIOS" "1"
Option "XaaNoOffscreenPixmaps" "1"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "1440x900" "1280x800"
EndSubsection
Subsection "Display"
Depth 15
Modes "1440x900" "1280x800"
EndSubsection
Subsection "Display"
Depth 16
Modes "1440x900" "1280x800"
EndSubsection
Subsection "Display"
Depth 24
Modes "1440x900" "1280x800"
EndSubsection
EndSection
Ale neviem ci pomoze, moze bezat system s inym rozlisenim ako je v xorg.conf?
mam tam len 1280x1024, a idu mi aj klasicke ako napr 800x600...
Subsection "Display"
Depth 24
Modes "1440x900_75" "1280x800_75" "1440x900_60" "1280x800_60
EndSubsection
EndSection
Pre tieto rozlisenia a frekvencie.